iis3dwb唤醒中断无法实现

[THSW]

初始化寄存器的参数配置

SPI_write_reg(FIFO_CTRL4, 0x00);//fifo——mode

// SPI_write_reg(INTERRUPTS_EN, 0x00);//inter

SPI_write_reg(CTRL3_C, 0x05); //high_act no_reset

SPI_write_reg(CTRL1_XL, 0xA4); //full_scale

SPI_write_reg(CTRL3_C, 0x04); //high_act no_reset

SPI_write_reg(CTRL4_C, 0x08|0x04); //drdy_1

SPI_write_reg(CTRL5_C, 0x20); //xunhuan20

SPI_write_reg(CTRL7_C, 0x02);

SPI_write_reg(FIFO_CTRL2, 0x00); //81

SPI_write_reg(FIFO_CTRL3, 0x0a); // fifo_rate

SPI_write_reg(FIFO_CTRL4, 0x06);  //

SPI_write_reg(WAKE_UP_DUR, 0x08);//0 du du thsw  sdu sdu sdu sdu

SPI_write_reg(WAKE_UP_THS, 0x02);//(lsb*32/256)0 wu 00 0000

SPI_write_reg(SLOPE_EN, 0x20);//suocun

SPI_write_reg(INTERRUPTS_EN, 0x80);//inter

// SPI_write_reg(MD1_CFG, 0x20);//

SPI_write_reg(MD2_CFG, 0x80);//

高电平激活，根据文档例程设置，但是无法实现唤醒中断

[Federica Bossi]

Hi @THSW ,

Welcome to ST Community!

Have a look at our driver example on Github, I think it could help you.

If this solves your problem, please mark my answer as "Best Answer" by clicking on the "Accept as Solution" button, this can be helpful for Community users to find this solution faster :)

[THSW]

please help，thanks

 

[THSW]

我曾尝试过，fifo中断（int1 int2）可以，但是唤醒（int1 int2）仍然不行，还是说fifo（int1）和唤醒中断（int2）一起用有冲突