STM32H743EVAL2 Pin extension

[Hamxa10]

hi guys,

I hope this message finds you well.

I am currently working with the STM32H743Eval2 evaluation board, and I'm facing a challenge with the smaller pins on the board. Specifically, I've noticed that the standard-sized pins do not fit in these smaller pin slots. how can I reach these pins.

 

Thank you very much for your time and assistance.

[Tesla DeLorean]

Perhaps pull the BoM from the "CAD Resources" tab on the product page. Determine the header type and pitch from the BoM

 

[Tesla DeLorean]

https://www.st.com/en/evaluation-tools/stm32h743i-eval.html

https://www.st.com/en/evaluation-tools/stm32h743i-eval.html#cad-resources

https://www.st.com/resource/en/bill_of_materials/mb1246_bom.zip

CN11 / CN12  Header，2*20，1.27*2.54mm，with positioning pin，SMT，333240M121

[mƎALLEm]

Hello,

Internally we have a such adapters to access that connectors on H7/F7 Eval boards:

But unfortunately they are not available on the market :frowning_face:. 

I would suggest:

1- The usage of that kind of "clips" (I don't know if this is the right naming) that you can attach directly to the pin:

2- Solder wires on the connector pins base if you're familiar with soldering.