STM32 MPUs Software development tools

Hello,I'm trying to generate code from a CubeMX project for STM32MP257f-ev1: my concern is that I've turn on PLLs from CubeMx Clock Configuration tab but code for PLLs clock configuration is not generated in SystemClock_Config function. In main.c I get only the following:void SystemClock_Config(void){__HAL_RCC_MCO1KERCLK_SETSOURCE(RCC_MCO1CLKOUTPUTSOURCE_CLK_MCO1);}Maybe I missed something but I can't find out, can someone please help me?In attachment you can find the project .ioc fileMarco.

Hello,CubeIDE 1.18Half a year now I acknowledge these two warnings (developing for the CM4):It appears all the time when I restart a debug session with a build before. How can I ged rid of that? For the moment I just click always "yes"... Of course I closed all "visible" consoles, but maybe I miss something?Here the second:After building and "start debugging" --> "tranfering  data" (into IP address), actually downloading the firmware.elf,To me it seems like a kind of race condition. I just ignore it, say "ok" and click "debug" again and the warning does no reappear. After the next build / debug start, the message comes back. This message seems to be project dependent (size of project / time for compiling?) 

I've set the root path in the OpenSTLinux SDK manager, but when I try to download scarthgap from the 'install other software' dialog, it appears to download the SDK, but it never shows up. It's not at the path I specified either. I don't know where, or even if, it actually gets downloaded. When I try to setup openstlinux with the project, I always get an error that it failed to configure openstlinux with scarthgap. I'm assuming that's what's compatible with CubeIDE right now.CubeIDE thinks it's installed though, it is hidden when I hide the items that are already installed. I've tried this on a Linux VM as well as WSL2 and the behavior is the same.

STM32CubeIDE v1.17.0 - same problem on Windows 11 and Ubuntu 18.04When I press the Butterfly icon it opens an "MPU Serial" console window and says "CONNECTED" but there's no prints.Meanwhile I can still connect via terminal program (TeraTerm on Windows, minicom on Linux) and see the prints. On Windows even going into Preferences and selecting the preferred port to the one that works in TeraTerm doesn't change anything.On Linux I was able to fix it this way.I am currently unblocked because I can continue on Ubuntu 18.04 but I figured I'd report this anyway...

Hi,i updated CubeMX to version 6.14 and therfor update STM32MP1 firmware package to v1.7.0- STM32Cube FW_MP1 V1.7.0In my project i am using the Option to copiy only need library files to projectBut this does not work correctly.There are some files, header files, missing under Middlewares\Third_Party\FreeRTOSThe files are all existing in the packge under C:/Users/XYZ/STM32Cube/Repository/STM32Cube_FW_MP1_V1.7.0but not being copied to Project folder.Can anybody confirm this issue?P.s. when i use firmware package 1.6.0 with CubeMX v6.14 everything is fine.Regards

Hello,I'm working on uploading test firmware to the M33 core on the STM32MP257F-EV1 using STM32CubeIDE.After enabling the OpenAMP function in the .ioc file, I noticed an issue with the files automatically generated under the Middlewares/Third_Party/OpenAMP/ directory: certain placeholders (such as @PROJECT_SYSTEM@) are not being replaced with the correct values. Is there a plan to address this in future updates, or is there a recommended workaround for now?  Thank you.

Hi :)  I have a custom-made board with the MP1 (stm32mp157D). The whole board is working fine, the A7 is running Linux and the M4 code runs fine. But I cannot get SWV to work on the M4 chip. I have reduced the code to an extremely simple code, nearly 100% generated by CubeIDE - I only added the following lines in the main to increment a counter called DDDEBUG and print using ITM_SendChar() :  /* USER CODE BEGIN 0 */ uint32_t DDDEBUG = 0; /* USER CODE END 0 */ /** * @brief The application entry point. * @retval int */ int main(void) { // ... (code generated by CubeIDE) ... /* Infinite loop */ /* USER CODE BEGIN WHILE */ while (1) { /* USER CODE END WHILE */ /* USER CODE BEGIN 3 */ DDDEBUG++; for (char* ptr = "test\n"; *ptr; ptr++) ITM_SendChar(*ptr); HAL_Delay(1000); } /* USER CODE END 3 */ }  The code compiles without errors, and it loads and executes fine, I can see in the debugger the counter incrementing (even in Live Expr

Hi, I am using STM32MP257F-DK microcontroller. I have never used a dual cortex before. All I want to do is to generate a simple STM32CubeIDE project which also has a .ioc file. I want to debug it via CubeIDE.1) Do I need OpenAmp to successfully flash the code?2) I have already set up the SDK, are there other settings I need to take care of?When I try to flash my current project, It always stops at 78% like shown in the picture below.

Hello everybody,currently i am trying to migrate from KEIL uvision to CubeIDE.CubeIDE Version: 1.13.2Build: 18220_20230914_1601Target: STM32MP157Debug Probe: STLink-v3miniE or othersExample Project: OpenAMP_FreeRTOS_echo_CM4 When I start a debug session in production mode, the M4 firmware is loaded and starts running. I have no problem with this.In Keil it was possible to reset the MCU during a debug session in production mode quite easily by pushing a button. So it was possible to set a breakpoint at the beginning of application in main().In CubeIDE there is no such possibility, am i right? Or can it be done in a similar and convenient way??I have not found a solution to this "problem".The conversation in this Topic deals with the same issue but the answer is not satisfactory for me.I tried several thing under Debug Configurations->Startup->Initialization Commands etc but without success.I hope that it is not necessary to write individual reset bits in the registers by

Hello! everyone.//-------------- Host -------------OS: Ubuntu 22.04Kernel: Linux leonsu-MINIPC-VC66-C2 6.8.0-52-generic //----------- board ----------STM32MP257F-DKkernel: Linux stm32mp2-e3-aa-db 6.6.48 //-----------------------------------------I followed the STM32MPU Developer Package[1] and  X-LINUX-QT Expansion Package[2] to setup up the SDK and X-LINUX-QT Developer Package, respectively.SDK Version: 6.0.0 X-LINUX-QT Developer Package Version: 2.0.1 I try to build qt example followed the section 7.1[2], I get some error message in following:Spoiler (Highlight to read)/home/leonsu/STM32MPU-Ecosystem/Developer-Package/SDK/sysroots/x86_64-ostl_sdk-linux/usr/libexec/aarch64-ostl-linux/gcc/aarch64-ostl-linux/13.3.0/ld: warning: libicui18n.so.72, needed by /home/leonsu/STM32MPU-Ecosystem/Developer-Package/SDK/sysroots/cortexa35-ostl-linux/usr/lib/libQt6Core.so.6.5.3, not found (try using -rpath or -rpath-link)/home/leonsu/STM32M

I have been trying to find a way to increase the icon size for the STM32CubeIDE toolbar. Today I found a way that worked for me.  

Where can I configure the Voltage of each individual Buckconverter od LDO?

We are pleased to announce that the release 6.14.0 of STM32CubeMX is available. What is new in 6.14.0: Added the support for the STM32WBA6xxx microcontrollers and: Added the support for USBX multi-instance Added the support for the memory management tool (MMT) Added the support for the STM32WBA65I-DK1 Discovery kit and NUCLEO-WBA65RI Nucleo board Deployed the Start From Board feature on the NUCLEO-WBA65RI Improved the Power Delivery (USB PD) functionality for STM32H7Rx/7Sx and STM32N6 microcontrollers by upgrading the USB PD library core to v5.3.0 Adapted STM32CubeMX user interface to allow the user to: Access the Compare Projects utility from the home page and compare two existing projects Compare two existing projects without save down Improved the build process with CMake Update the RIF panels to indicate the peripherals that are not supported by STM32MP2 products. Removed the Secure Manager boot path Main fixed issues in 6.14.0: Refer to the STM32 microcontroller wiki at:http

Is it possible to store keys generated by STM32MP_KeyGen_CLI in TPM and use them by STM32MP_SigningTool_CLI directly, without extracting?

HelloI would like to know how can I disable the JTAG in the STM32MP157 using OTP and stm32CubeProgrammer

According to this article the signing tool is a part of STM32CubeProgrammer. I need a signing tool during my Yocto build to be able to build signed images. The best way to guarantee a reproducibility of the build is to launch it in a dedicated container (to make sure the host system is the same on all developer / CI machines).So the few questions are:I can't automatically download only the signing tool, can I? The download of STM32CubeProgrammer package requires for me to accept the license.It seems that STM32CubeProgrammer installer doesn't have any command line options. I would like to at least have unattended installation, automatically accepting the license and setting installation path in a non-interactive way. CubeProggrammer installation manual doesn't mention any. All that is required, for example, during 'docker build' execution.Is there an open source signing tool alternative?

I want to know why I downloaded the latest JAVA, but I can't install STM32CubeProgrammer.*This post has been translated from Chinese to comply with the ST Community guidelines.

Hello,I am preparing to develop a custom board based on the STM32MP15 series MPU and getting accustomed to the DDR testing procedures in the STM32Cube ecosystem with an STM32MP157F-DK2 evaluation board. However, I am running into issues with the SYSRAM loading option which seems to be the necessary method for DDR testing new, custom boards designed around the STM32MP157 MPU.Firstly, I am able to run the DDR Test Suite in STM32CubeIDE or STM32CubeMX after importing the STM32DDRFW-UTIL-main\DDR_Tool\STM32MP157C-DK2 project into STM32CubeIDE. I am able to run the test firmware on the evaluation board with the "Debug As" option (with boot switches set to Engineering Mode), and then I am able go to a new .ioc project file made for the STM32MP157F-DK2 (peripherals initialized in their default modes) and use the DDR Test Suite via the "DDR Interactive" mode with no issues. Similarly, I can open a serial connection in TeraTerm via the ST-LINK COM port and run the DDR tests there

Hello Team,Currently we are facing issue in loading a custom kernel on STM32MP157A). To load and build the image for the custom kernel please find the link below which currently we are usinghttps://wiki.st.com/stm32mpu/wiki/Getting_started/STM32MP1_boards/STM32MP135x-DK/Develop_on_Arm%C2%AE_Cortex%C2%AE-A7/Modify,_rebuild_and_reload_the_Linux%C2%AE_kernel  We have build and install all the dependencies which are required https://www.st.com/en/embedded-software/stm32mp1dev.html here in this we have installed  MP1-DEV-SRC .   The linux system currently we are using is 20.04.1-Ubuntu .So there is requirement that we need to enable few things from the make menuconfig like RAW GADGET , GADGET FS , GADGET ZERO ,FUNCTION FS. Eventually when we build the kernel without make menuconfig changes, It builds and runs fine but after any configuration when we run the make ${IMAGE_KERNEL} vmlinux dtbs LOADADDR=0xC2000040 O="${OUTPUT_BUILD_DIR}" command it shows the error in the pic

Hi I am working with the STM32MP257FxEV1 and trying to create a bare metal test project for evaluating the M33, since there is no ready example that can be created from the STM32Cube IDE I succeeded to create the project and build it correctly, also put the EV board to development boot (not SD, not QSPI), and then when trying to start the debug, it fails with the following message I suspected the linker file to be created wrong from the ioc generator, cause the addresses were assigned to the DDR addresses and not the SRAM, so I changed them to the SRAM like this The debugging is set the SWD and it looks like it connecting OKbut the problem remains and not solved, I can't enter a debug session I attached the whole project - it a very small one, and maybe someone can explain what is the problem?Thanks 

Hello, I am trying to make my own project on Cube IDE for the STM32MPU257F-EV1 Development board. However, whenever I try to run it or debug it fails. I am pretty sure it because of the configurations because the sign build configurations, that we often use for the example applications, is not one we can use by default, and I am unsure how to make a configuration that will actually allow it to run. As of now if my project just has the code generated from the ioc it is still unable to run or enter debug mode. Any help would be greatly appreciated. 

Hello  Continue to me development on the STM32MP257xEV1, previous failure with the Python crypto packages  the project: OpenAMP_TTY_echo is loaded correctly, built configuration _ns_sign is completed OK, also looks like the .bin file is generated    setting the Run configuration with the correct IP address, conneting to the board run => downloading the bin to the target is progressing till the endupon completion of the download, the board is powered on - see this in the consoleBUT - remoteproc remoteproc0: powering up m33remoteproc remoteproc0: Image is corrupted (bad magic)remoteproc remoteproc0: Boot failed: -22 looks like the signing function has a bad key    Can it be the python packages versions => pyelftools and pycryptodomex ?  

Hello  I'm starting development on the STM32MP257xEV1 (I already have an experience with the STM32CubeIDE with lots of MCUs) I followed the installation instructions, IDE 1.17 => and the MP2 package + patch => Python packages  I'm running on windows 10 x64, have the python 3.10 and checked that those libraries are installed (i.e. pip list and jupyter-lab example python code)   The board OpenSTLinux is booted correctly from the SDCARD, and I see the terminal and have a live Linux console  Basically I wanted to start with an example on the M33, and started with the following link: Modify, rebuild and reload the firmware - stm32mpu the project : OpenAMP_TTY_echo is loaded correctly, and the build of _ns is completed OK When I choose (with the hammer) the _ns_sign  I get this error :  Th trackback shows: ImportError: cannot import name 'utils' from 'cryptography.hazmat.primitives.ciphers.aead' (C:\Python\Python310\lib\site-pack

could someone help me on how to integrate qt with cubeide because i want to access the dac when button is clicked it has to write to dac

hiwhy is the wiki page removed on (X-LINUX-QT How To build Qt applications using STM32CubeIDE)please give me some explanantion or any blogs on How To build Qt applications using STM32CubeIDE