STM32CubeIDE (MCUs)

 Hi everyone,I'm facing an issue with debugging STM32 projects in STM32CubeIDE. I'm using a MacBook Pro with an M3 ARM CPU and debugging an STM32 project using the ST-Link GDB server. When I manually run the ST-Link GDB server from the terminal with the appropriate command, everything works fine. However, when I attempt to start the debugging session directly from the Debug button in STM32CubeIDE, it doesn't work.Detailed Issue:STM32CubeIDE Version: ( STM32CubeIDE 1.16.1)Target Microcontroller: ( STM32 Nucleo_G431KB )Debugger: ST-Link (i tried openOCD and GDB) and J-link (Segger)Host System: macbook pro  M3 ARM CPU)Manual Debugging Command:When I run the following command in the external terminal, the GDB server starts properly, and I'm able to debug the application. I use then remote GDB server (localhost with default port) /Applications/STM32CubeIDE.app/Contents/Eclipse/plugins/com.st.stm32cube.ide.mcu.externaltools.stlink-gdb-server.macos64_2.1.400.202404281720/tools/

Using STM32CubeIDE v1.16.1, I am unable to generate .hex or .bin outputs using the Internal Builder and selecting the checkboxes found at `Properties -> C/C++ Build -> Settings -> MCU/MPU Post build outputs`:The files are not present in the build output folder, and there is no output in the STM32CubeIDE console after "arm-none-eabi-gcc -o <project name>.elf ...."However, if I select the external builder, the files get generated and placed in the build output folder, and the console has output showing the files getting generated.I found this forum post from 2019 that seems to indicate spaces in the paths to the GCC tools may be causing the issue: .bin / .hex File Generation - STMicroelectronics Community I do not have spaces in the paths to the GCC tools, but there are spaces in the paths to my project files that I can't get rid of (company configured OneDrive folder name has spaces in it).I can use the external builder for the time being, but if spaces in the p

I had a problem with the IDE and deleted it by manually searching all the files on my ubuntu 20.04.Now when I try to run the binary again, it says "Nothing to install.", however I have deleted all stm files from my machine.What can I do?

Hello,- I am new to the STM32 software suite- I have a (professional) project to develop with fast analog acquisitions that also involves a dialogue with a computer via a simple USB cable.- I am evaluating an Olimex model STM32-H107 board on which is mounted an STM32F107VCT6 chip- I have installed the STM32CubeIDE software- FreeRTOS has been activated and a test task has been automatically generated- An empty program now compiles without errors and the files to be downloaded to the chip should now be on the computer.- The chip on the board is connected to my computer via a simple USB cable- --> The computer does not beep when connecting the USB cable (although STM32CubeIDE is installed)- I tried the "Run-run" function on STM32CubeIDE to send the program to the chip but I get an error message "No ST-LINK detected! Please connect ST-LINK and restart debug session."- I then installed the STM32CubeProgrammer software to try to program the chip. I tried on the right of the "Usb - Connect

Hallo, I have a problem:STM32CUBE IDE 1.16.0 @ win 7 64bitmyST login - nothing happenedManage Embedded Software Packages - nothing happenedfirmware updater -> Check connection - OKFrom log:!MESSAGE Command 'com.st.stm32cube.ide.mcu.ide.command.userAuth.login' failed !STACK 0 org.eclipse.core.commands.ExecutionException: Error executing 'com.st.stm32cube.ide.mcu.ide.command.userAuth.login': java.lang.NullPointerException: Cannot invoke "javax.swing.JComponent.setVisible(boolean)" because "this.webAppContainer" is nullCan you help me? Not possible to continue with my workThanx a lot.

Hello, I am experiencing a bug in STM32CubeIDE since I made the latest update 2 days ago.I was able to download the SW and debug in the previous version, after the updage I can't even download the software using STM32CubeID here is the log :STMicroelectronics ST-LINK GDB server. Version 7.8.0Copyright (c) 2024, STMicroelectronics. All rights reserved. Starting server with the following options:Persistent Mode : DisabledLogging Level : 1Listen Port Number : 61234Status Refresh Delay : 15sVerbose Mode : DisabledSWD Debug : EnabledInitWhile : Enabled Waiting for debugger connection...Debugger connectedWaiting for debugger connection...Wrapping read detected. Addr: 0xffffffff; Length: 8Wrapping read detected. Addr: 0xffffffff; Length: 1Wrapping read detected. Addr: 0xffffffff; Length: 1Wrapping read detected. Addr: 0xffffffff; Length: 8Wrapping read detected. Addr: 0xffffffff; Length: 1Wrapping read detected. Addr: 0xffffffff; Length: 1Wrapping read detected. Addr: 0xff

Dera Team,Could you please help me regarding to flash the .HEX file using CAN?Regards,N.Anwar 

Hello everyone, I'm using the STM32CubeIDE , then I would like to ask about the ADC configuration for the STM32F429 board. Currently, I want to distinguish a sine wave input ranging from 10kHz to 3MHz, the ADC parameters are set as follows:(1) APB 1 peripheral: 36 MHz(2) Clocks Prescaler: Divided by 2(3) Sampling Time: 3 Cycles Additionally, the TIM is set to 72 MHz, with PSC: 0 and ARR: 11.  How should I configure it? Thank you, everyone!

Hi,I am using the STM32WB15CC chip in a stm32WB1mmc module on a custom pcb. I need to write to a non volatile uint8_t variable 70,000 times over the lifetime of the device. I have been using following guide (  https://community.st.com/t5/stm32-mcus/porting-and-using-x-cube-eeprom-with-any-stm32/ta-p/570539 )to implement emulated eeprom. When debugging, my code steps through fine and works great. When I try to restart the debugging session or program a different basic sketch I get an error. To fix this I use the STM32CubeProgrammer to erase the entire flash and then the board can program again. I have attached a screenshot of the error message.Here is my eeprom_emul_conf.h variables    /* Configuration of eeprom emulation in flash, can be custom */ #define START_PAGE_ADDRESS 0x08017800U/*!< Start address of the 1st page in flash, for EEPROM emulation */ #define CYCLES_NUMBER 7U /*!< Number of 10Kcycles requested, minimum 1 for 10Kcycles (def

Hello,I've been running into issues porting a simple blinking LED program from STM32CubeIDE to a Makefile based app. I have the exact Drivers (as a submodule that links to the one STM32l0x from github: https://github.com/STMicroelectronics/STM32CubeL0) and the source code is pretty simple. I'm able to create a build directory where I build all the libraries, source code and assembly file. The linking process also seems to work. However, the generated elf on the STM32l031k6 nucleo board doesn't run. I wondered if the GNU make tools were different and possibly causing an issue. The STM32CubeIDE uses gnu-tools patched by stm (https://github.com/STMicroelectronics/gnu-tools-for-stm32) compared to the one I'm using on Windows wsl (gnu v10.3.1). I ran into issues with installing the `gnu-tools-for-stm32` and a previous forum mentioned using the --skip_steps but that didn't work either. I doubt using a regular version of gnu toolchain will have caused this error. I tried using the C

Hello, I am trying to modify a project from a third party, who gave me a .ioc file. Just the initialization of my board periferics is giving me trouble, as I am a beginner. I keep adding references and driver files, however I don't know which ones I should add to correct these errors: ../Middlewares/ThreadX/ports_module/cortex_m33/gnu/module_manager/src/tx_initialize_low_level.S:91: undefined reference to `__RAM_segment_used_end__' ../Middlewares/ThreadX/ports_module/cortex_m33/gnu/module_manager/src/tx_initialize_low_level.S:97: undefined reference to `_vectors' ../Middlewares/ThreadX/Core/tx_initialize_kernel_enter.c:138: undefined reference to `tx_application_define' any help would be very appreciated.  Thanks is advance, Albert

Hello, I'm having an issue with my STM32IDE. I just installed it, and when I try to log in, I press the "myST" -> "Login" button, and it opens a box called "User Authentication Dialog," but it's blank, and I can't log in. This is important because many features require logging into the IDE, and I can't work properly without it.  

In my project I use some git submodules to add features.One of this submodules has a complex folder structure to add documentation, tests, examples and so on. But I only need the src folder.Given how Git submodules work, the entire folder structure is downloaded, so I had to remove the unwanted folders from the compilation.Now I can use the submodule and compile my project, but in the test folder of the submodule there is a main.c file that I don't include in my compilation. I tried to write a malformed line of code to see if it would report an error or not and I am sure that that file is not compiled, since I don't get the error.But I still get an error after the compilation: The float formatting support is not enabled, check your MCU Settings from "Project Properties > C/C++ Build > Settings > Tool Settings", or add manually "-u _printf_float" in linker flags. The error points to the following line in the main.c:  printf("Coverage : %f\r\n", (float)(tests

Hello, I am a beginner with STM32IDECube.I have just installed Version: 1.16.1 Build: 22882_20240916_0822 (UTC) which seems to work.I am developing a program with the STM32F107 processor as a target.Everything works so far except that now I want to integrate my little test program (just for blinking e LED)  written in C into the project with a view, of course, to compiling it and then downloading it into the component alongside FeeRTOS and the configurations that I have made with STM32Cube for which I have generated the code. My problem is: 1) I do not see anywhere, neither in STM32Cube nor in my directories on my disk, a file in which this basic code could have been generated ? 2) I don't see anywhere, neither in STM32Cube nor in my directories on my disk, a "\Core" directory where this could be ?3) I don't see anywhere, neither in STM32Cube nor in my directories on my disk, a "main.c" file in which I could, possibly and if that's what needs to be done, integrate my code ? See at

Hello, I using STM32F429IIHX Chip. I wanna use Input Capture Mode, but not working right when i used general timer(tim2,3,5 ...) can use Input Capture Mode. but In TIM8 is advanced mode then, NVIC Settings is a little bit different.  Advanced Timer8 - Input Capture Mode - NVIC Setting is that one? in genreal timer has just global interrupt check box thanks   

Hi. Can you say me what mean that type of error.The code is surely correct because I've been working on it. The errors showed up after updating CubeIDE to a new version and generating files from .ioc file in IDE.c:\st\stm32cubeide_1.7.0\stm32cubeide\plugins\com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.10.3-2021.10.win32_1.0.0.202111181127\tools\arm-none-eabi\bin\ld.exe: ./Core/Src/communication/sms.o:C:/master_g474ve/Debug/../Core/Inc/config.h:54: multiple definition of `config'; ./Core/Src/battery_charger.o:C:/master_g474ve/Debug/../Core/Inc/config.h:54: first defined here

Hi,When I updating the pin assignment information and doing code generation, I find my code, for example, USER CODE part is clear. Why? Is any setup wrong here?   while (1){/* USER CODE END WHILE */ /* USER CODE BEGIN 3 */}/* U STM32CubeIDEVersion: 1.16.0Build: 21983_20240628_1741 (UTC) MacOS: 14.2.1

Hi Folks,I have the latest version of the IDE (1.16.1) but now the search feature won't work. It will only return an error:When I try to search for "HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout" I get the following set of errors:Text SearchAn internal error occurred during: "File Search Worker".'byte[] org.eclipse.core.resources.IFile.readNBytes(int)'An internal error occurred during: "File Search Worker".'byte[] org.eclipse.core.resources.IFile.readNBytes(int)'An internal error occurred during: "File Search Worker".'byte[] org.eclipse.core.resources.IFile.readNBytes(int)'An internal error occurred during: "File Search Worker".'byte[] org.eclipse.core.resources.IFile.readNBytes(int)'An internal error occurred during: "File Search Worker".'byte[] org.eclipse.core.resources.IFile.readNBytes(int)'An internal error occurred during: "File Search Worker".'byte[] org.eclipse.core.resources.IFile.readNBytes(int)'An internal error occurred during: "File Search Worker".'byte[] org.eclipse.co

I have created a new project and built it. The build analyser shows:I then added the following at file scope:int8_t position[ 4096 ]; // Default zero initialized arrayThe build analyser then shows:The 4k increase in RAM usage makes sense, but not the 4K increase in FLASH.The console shows:The build analyser also shows:Why is 4k being added to the .bss section in FLASH for the position object?

Hello!!!I found this code in GitHub: https://github.com/ndunello/NG0B1_GFX01M2_TGFX.I think this code could be useful for my project. When I build, no error occurs.But when I'll record in microcontroller with debug appears that error.Please, somebody could help me to fix this error?This is the error log from STM32CubeIDE:Error in final launch sequence:   Failed to execute MI command: load C:\\Users\\Documents\\github_ndunello\\NG0B1_GFX01M2_TGFX\\Debug\\NG0B1_GFX01M2_TGFX.elf   Error message from debugger back end: Load failed Failed to execute MI command: load C:\\Users\\Documents\\github_ndunello\\NG0B1_GFX01M2_TGFX\\Debug\\NG0B1_GFX01M2_TGFX.elf   Error message from debugger back end: Load failed Failed to execute MI command: load C:\\Users\\Documents\\github_ndunello\\NG0B1_GFX01M2_TGFX\\Debug\\NG0B1_GFX01M2_TGFX.elf   Error message from debugger back end: Load failed Load failedAnd this photo represents what shown in Console:

Good Morning I just received a stm h750 with a display on it. I am used to programming on stm32 IDE but have no clue on where to begin. I would like to get tools to create templates for my display and flash them on my board. is there any code/programm already done so I could analyse it?

We are using an STM32F407-DISC board to run a permanent magnet synchronous motor and we are using STM Cube IDE software (Version 1.16.1) for coding and debugging purposes. The console (Live expression) of the cube IDE software get stuck(frozen screen) as soon as the motor is powered or a few seconds after that and Target not responding message starts popping. After this, we cannot change anything or view the console where variables are changing and updating. However, the code runs well and the motor functions as per our coding. Also, I believe communication is not lost as when I am changing a potentiometer position to change motor speed it responds to it. Upon reset the algorithm reinitiates and works fine with the screen still stuck. Now, if the STM is disconnected and reconnected then only this issue is resolved and further coding/updating can be carried out. The screen does not freeze at all and responds as long as required if the code is run with the motor not powered. Ki

I am trying to use google test on a project in the cube IDE. I am using a sample "hello world" project. I have referenced various tutorials and instructions and here are my settings. My google test library is downloaded via msys2 and I am running a PC build with the latest installed cubeIDE, msys2 etc. C++ and C compilers. C++ linker:However, I am getting the following errors:It seems to me that the C++ standard is the cause. But I have change the compiler to use various C++ standards and I still get this error. Would appreciate if I can get some help on this. I will provide additional detail if needed. Thank you. 

After I installed the CubeIDE (STM32CubeIDE-Mac) on my mac with the delivered iinstaller, I cannot find the CubeIDE what is the name of the application? in which folder it is installed?

HiI have a variable: /* Parameters (default storage) */ struct P_GovTrimControl_T_ { real32_T FreqSP; real32_T kD; real32_T kI; real32_T kN; real32_T kP; }; typedef struct P_GovTrimControl_T_ P_GovTrimControl_T; #define USE_DTCM __attribute__((section (".DTCM_MISC"))) P_GovTrimControl_T __attribute__((__aligned__(4))) USE_DTCM GovTrimControl_P = { 50.0F, 2.0F, 20.0F, 2.0F, 30.0F }; The linker script memory allocation: /* Memories definition */ MEMORY { DTCM_STACK (xrw) : ORIGIN = 0x20000000, LENGTH = _Min_Heap_Size + _Min_Stack_Size DTCM_MISC (xrw) : ORIGIN = 0x20002000, LENGTH = 120K ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K ... } If I use the default allocation of the variable to SRAM1, the values get set to the values assigned in the code as the default linker script and start