Automotive and Transportation

Now you can bring with you AutoDevKit everywhere!Check out our new APP for Android:https://play.google.com/store/apps/details?id=com.adk&hl=it

Dear All ,SPC5Studio updated components are available (56,57 on 58)more information on http://download.spc5studio.com/New or updated componentsRLA 1.13.0   SPC58xHxx (cut2) :       Header file update       Add support for networking test       Add package eTQFP144, eLQFP176 and FPBGA302 to the Platform Component       Add HyperRAM, HyperFLASH and CANnelloni test support for test framework component   SPC582Bxx, SPC584Bxx, SPC58ECxx:       input channel support for I2S driver   SPC58x:       16 bit register address for I2C driver   SPC56x, SPC57x, SPC58x:       Add selection of C or C++ linker in Platform componentGTM 1.13.1   Enable ATOM2 for SPC572LxxILi9341 1.5.0 &

Hi, the user manual of the ST8089FG mentions an internal antenna and splitter but the datasheet does not talk about it, and even if they were external in the ADC hardware reference design the document does not indicates the model of the splitter or the antenna and does not specify if it is a patch, chip, smd, active or passive internal antenna that must be implemented, or when should be implemented, thanks

Hi, the STA8089FGBD is an GNSS IC that supports DRAW, but it does not integrate an embedded IMU, I want to connect an external IMU to be able to use DRAW, but I cant find any hardware or sofware reference design to achieve this, does anybody have any idea about a reference guide or something like that?, ST has the TESEO3DRAW EVB to develop this solutions but what happen when you want to desig your own PCB with that solution?, there is no documentation to do that (at least I have not found it), thanks

Here you are our latest blog article on AutoDevKit:https://blog.st.com/autodevkit/Enjoy reading it! ;)

..

Hi,My setup:SP570S-DISP Demo Board EvaluationuC: SPC570S50E1IDE: SPC5Studio 5.8.1What is the simplest way to implement a reset via software?Is there any SPC5 library function that perform software reset?Thanks,Regards

Hi,My setup:SP570S-DISP Demo Board EvaluationuC: SPC570S50E1IDE: SPC5Studio 5.8.1I'm using example "SPC570Sxx_RLA Bootloader Application for Discovery".Function "updater_jump()" In "firmware_updater.c" file, jump to application image without checking if there is valid application image.So, if there isn't a valid application image, bootloader stucks and the only way to restore bootloader functionality is to perform a "physical" reset using button RESET of SPC570S-DISP board.void updater_jump(void) { void (*fptr)(void); uint32_t jump_address_pointer; vuint32_t jump_address;   jump_address_pointer = updater_config.codeimage1.address + 4UL; jump_address = *((vuint32_t*)(jump_address_pointer)); /* * stop peripherals */ #if (SPC5_UPDATER_CONN == SPC5_UPDATER_CONN_CAN) can_lld_stop (updater_config.can_driver);   #else sd_lld_stop(updater_config.serial_driver); #endif #if (SPC5_UPDATER_ACT == SPC5_UPDATER_ACT_TIMER) stm_lld_stop(updater_config.stm_driver); #endif   u

Hi,My setup:SP570S-DISP Demo Board EvaluationuC: SPC570S50E1IDE: SPC5Studio 5.8.1What is the correct way to jump from application to bootloader?Thanks,regards

Hi All,is there any mcu in SPC5 family with interface for unmanaged raw NAND chips, e. g. External Bus Interface or something else? I've checked modern gen. datasheets and haven't found any mentions about NAND. Thanks for any help

Heyain both the flash example and my personal implementation the CFG and lib files for the eeprom_emulation_driver are missing which prompts the error  Any ideas ?

New installation from scratch of SPCStudio 5.8.1 gives error that make is not found. I start a project with GCC and cant build the project. I cant find the make.exe nowhere except the hightec plugin folders. When I add those folders i got other errors like"make -j12 all System nie moľe odnale«† okre?lonej ?cieľki.The syntax of the command is incorrect.make: *** [build] Error 1components/spc560dxx_platform_component_rla/lib/rsc/rules.mk:117: recipe for target 'build' failed"My Path is C:\SPC5Studio\eclipse\plugins\com.st.tools.spc5.tools.hightec.win32_1.0.0.201809141314\hightec\ppc-ht-eabi\bin;C:\SPC5Studio\eclipse\plugins\com.st.tools.spc5.tools.hightec.win32_1.0.0.201809141314\hightec\bin;C:\SPC5Studio\eclipse\plugins\com.st.tools.spc5.tools.gnu.gcc.ppcvle.win32_4.9.4.20190604105544\toolchain\bin;C:\SPC5Studio\eclipse\configuration\org.eclipse.osgi\669\0\.cp\gnutools;Also the folder included normally in path "C:\SPC5Studio\eclipse\configuration\org.eclipse.osgi\669\0\.cp\gnutools

Stuck at home and looking to employ some free time?Learn about AutoDevKit now!Third tutorial published and more to come!!!:smiling_face_with_smiling_eyes: Tutorial 3: https://www.youtube.com/watch?v=3iCMWjYalwgTutorial 2: https://www.youtube.com/watch?v=pQeyJQBHV1cTutorial 1: https://www.youtube.com/watch?v=WDp4XmmwEwcDiscover more of AutoDevKit at www.st.com/autodevkitDownload AutoDevKit at www.st.com/autodevkitswStay home, stay safe! :flexed_biceps:

Hi, We are using SPC560B50L5C6E0Y microcontroller for one of our application. I have SPC560B-DIS with me and want to flash want to flash SPC560B50L5C6E0Y controller in our designed board. I want to know the required jumper setting on dev kit for flashing external target. What settings on SPC560B-DIS kit decides whether to flash the on-board controller or external target? I have removed S1,S2 jumpers and powering through USB. I have placed J19,J20 jumper and trying to flash but controller is not getting flashed correctly.

Hello.I have a using eval board : SPC58EC-DISP.​I try to receive all packet (slave mode) just like DAQ. SPC STUDIO support LinFlexD example only using filter.I think that lin_lld.c - spc5xx_lin_rxi_interrupt (SPC STUDIO Example) is need to modified.Please tell me if you know that receive way to data without filter in slave mode.Thank you.

I have purchased the SPC560P microcomputer evaluation board (SPC560P-DISP).I want to use SPC5studio and SPC5-UDESTK.However, "Activation-Key" is required to get SPC5-UDESTK.SPC5-UDESTK website: www.pls-mc.com/spc5-udestkThe input form has the following descriptions.[Please insert the activation key you got from STMicroelectronics in the from XXXXXXXX-XXXX-XXXX-XX]What is "Activation-Key"?Please tell me how to get it.

Hi All,We are using different ADC group to access DMA channel. We have 3 ADC groups, Group1 ADC channel need to read continuously. So it should stop the other ADC channels to accessing the DMA. If it is accessing, it should stop it and reconfigure with Group1 configs. We are using below line of code to do it. Please let us know, is this the correct way or we need to check some other registers? edmaChannelStop(adcp->adc_dma_channel);#define edmaChannelStop(channel) {                     \ edmaDisableRequest(channel);                       \ edmaClearDone(channel);                         \}#define edmaDisableRe

Hello All,I am working on UART on SPC560p Discovery board. I can transmit the data but unable to receive the data. I want to receive byte by interrupt method to avoid blocking.Please guide me with Rx interrupt initialization so that I can use"static void spc5xx_serve_rxi_interrupt(uint32_t isdp)" function given in "Serial_iid.c"Also please suggest me if any other method to receive the data without blocking.Thank You,Pradnya

We have just released version 1.1.1 of AutoDevKit, with extension of VN & VNH configuration GUI and new platform SPC584B-DIS and SPC584B-DISP support for Audio Solution on AEK-AUD-D903V1.Check the new software now at: www.st.com/autodevkitsw For more details check our release note.Stay home and keep safe!:flexed_biceps:

Hi, I have TESEO-LIV3F , I want to power the GPS when it's needed. I have backup battery connect to VBAT because i want to have hot start . 1- In my case how much current draw from the GPS when only VBAT powered? It says in data sheet 6uA as hardware standby, Is it the case when I just power VBAT? 2- what is the difference between hardware standby and software standby? and why software standby current is 12uA?Thanks

Hey AllFairy new to SPC5 development, coming from st's 32bit standard Micro controllers.I have a few questions on the process to creating a project from scratch1) Are we meant to just load the example projects and modify them according to our needs and add anything else OR can we start from scratch via New-> New spc project etcetc...2)Starting a project from scratch, and adding in the SPC5Studio Pin map editor, i do what i would normal do in CubeMX, save, generate. but from that i just have the platform_component_rla file, and nothing more. Referring to the help manual, under SPC5STUDIO -> Concepts -> spc5studio Projectsi'm missing my main components /dependencies. Is there a process to installing these into the project that i've missed ?Here is a photo of my workspace.

Hi All,I'm using SPC560P development board in my project. Using SPC5 studio for code development and UDE for debugging purpose. I built the project, but it is not creating UDE folder in the project .How I can create or update my UDE folder after every build. Thanks,Basava

Hello Everyone, update: I Worked it out :), forgot to declare the function. must of deleted it and forgot about it.I'm having an issue with finishing a build, i've modified the low level drivers for Can and named the callback functions ( from the file /SPC560Dxx_RLA CAN Test Application for Discovery) initially everything was dandy, then after adding those in i started to get this errorin my can_lld_cfg.lst i have I've attached them, does anyone knows how to interpret this.

Hello, ​I have two board with SPC582B 64Pin.​i want to test CAN communication each other. ​i did import sample what "SPC582BxxRLA CAN Test Application for Discovery"​and i want to use CAN port - 1, 2​i don't know how can i make code.​/* SPC5 RLA - Copyright (C) 2016 STMicroelectronics   Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with the License. You may obtain a copy of the License at   http://www.apache.org/licenses/LICENSE-2.0   Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. */   /* Inclusion of the main header files of all the imported components in the order specified in the application wizard. The file is generated automaticall

I am using SPC560B microcontroller, I want to program in such a way that the module should produce a wakeup interrupt ever 0.1S once. What is the value to be loaded in RTCVAL field in the RTCC register for 0.1s interrupt.I have used a clock source of 128KHZ. So, to get the 0.1s interrupt the RTCVAL loaded 12800void ConfigureWKPU(void) { /* Enable WKPU PCTL */ SPCSetPeripheralClockMode(69, SPC5_ME_PCTL_RUN(2) | SPC5_ME_PCTL_LP(3)); INTC_PSR(46) = 7; WKUP.WRER.R = (1U << 1);                    // enable wakeup pin of:\n WKUP.WIREER.R = (1U << 1);                   // enable rising edge interrupt  WKUP.WISR.R = 0xFFFFFFFFU;       // clear interrupt flags that an external rs WKUP.IRER.R=0xFFFFFFFFU; WKU