STM32 MPUs Software development tools

Hi STM32CubeProgrammer Community,I hope you are all fine and doing great. I am new to STM32CubeProgrammer and I am trying to install/download it in Linux. I am facing and issue which I have logged below. Please guide me on how I can fix this issue. I tried with different web browsers(chrome, firefox) to download it. but I am facing the same problem with (windows, and Linux).

Hello,I've implemented the solution proposed in https://github.com/MaJerle/stm32-usart-uart-dma-rx-tx?tab=readme-ov-file by @Tilen MAJERLE for efficiently using the DMA in circular mode with a buffer for the UART in a STM32L4 board.I'm trying to port my driver to the M4 processor of a STM32MP157-DK2. I've successully configured the UART3 in the M4 project with DMA in normal mode and I'm receiving one byte at a time and adding them with the RxComplete callback to my buffer.However, when I changed the DMA mode to circular, my surprise was that there is no HAL_UARTEx_ReceiveToIdle_DMA function in the HAL driver and no HAL_UARTEx_RxEventCallback callback. So I can use the RxComplete and RxHalfComplete callbacks but no idle line callback, which is a big problem when using a long circular buffer size.Can anyone explain what is the problem, why there is no Idle line detection here or how can this feature be implemented for this board? Thanks in advance.

We are pleased to announce you that the official release of STM32CubeMX V6.9.0 is available for download here What is new in STM32CubeMX V6.9.0? Added the support for new microcontrollers in the STM32U5 series Added the support for new microcontrollers in the STM32WBA series Added the support for two new boards related to the STM32U5 series: STM32U5G9J-DK1 and STM32U5G9J-DK2 Added the support for one new board related to the STM32L4+ series: STEVAL-SMARTAG2 Added the support for the memory management tool for the STM32H5 and STM32U5 series Added the support for new boot paths for the STM32H5 series Added makefile generation in dual context for the STM32H7, STM32L5, and STM32U5 series Added hierarchical project support in the Example Selector for the STM32U5 and STM32WL series Added user authentication functionality Added the support for processing before and after code generation Upgraded the JDK11 to Adoptium™ Termurin™ 17.0.6 Main fixed issues 121529 [Example selector] Managem

Hello all,I'm looking for the STMCubeProgrammer for STM32MP257F-EV1.The actually on web site available version 2.16 seems to not support my board.At least it does recognize my board but tells it's not supported13:41:26 : Error: Database cannot be found. DatabasePath = C:\Program Files\STMicroelectronics\STM32Cube\STM32CubeProgrammer\bin/../Data_Base/STM32_Prog_DB_0x505.xml13:41:26 : Error: CUBEPROGRAMMER_ERROR_NOT_SUPPORTEDSomebody can help me?Thanks in advance.Cheers Alex

My question is:Can I use PE12 AND PE13 pins as TAMPER_IN type or not ?

# How to use the device tree generated by CubeMX to generate images and add a serial port to MP135My hardware platform is MP135, and now I want to add a serial port UART8 to it, so I plan to modify the device tree.  But I encountered some issues while using the SDK.According to the official 'how to do. txt', I compiled u-boot and generated the following content in the deploy folder:```bash~/workspace/STM32/stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21/sources/arm-ostl-linux-gnueabi/u-boot-stm32mp-v2022.10-stm32mp-r1-r0/deploy$ lsdebug                       u-boot-stm32mp157c-ed1.dtbu-boot-nodtb-stm32mp13.bin  u-boot-stm32mp157c-ev1.dtbu-boot-nodtb-stm32mp15.bin  u-boot-stm32mp157d-dk1.dtbu-boot-stm32mp135f-dk.dtb   u-boot-stm32mp157d-ev1.dtbu-boot-stm32mp157a-dk1.dtb  u-boot-stm32mp157f-dk2.dtbu-boot-stm32mp157a-ev1.dtb  u-boot-stm32mp157f-ed1.dtbu-boot-stm32mp157c-dk2.dtb  u-boot-stm32m

how i can solve it : Error in final launch sequence: Failed to execute MI command:target extended-remote localhost:3333 Error message from debugger back end:Truncated register 16 in remote 'g' packetFailed to execute MI command:target extended-remote localhost:3333 Error message from debugger back end:Truncated register 16 in remote 'g' packetTruncated register 16 in remote 'g' packet

Hello     We are planning to work on STM32MP2x processors in our custom design boards. We tried with latest version of CUBEMX for pinmux but it's not available. So, we would like to know when we can expect the pinmux support for STM32MP2x processors.       Thank you in advance.regardssrikanth

USB speed  : High Speed (480MBit/s)                                 Manuf. ID  : STMicroelectronics                                  Product ID : USB download gadget@Device ID /0x500, @Revision ID /0x2001, @Name /STM32MP157DAB Re  v.Z,                                                 SN     : 004700213438511336383238       &

According to different STM32MP1 documentation such as STM32MP1-Peripheral-USB_Host_interface_USBH or STM32MP1-Peripheral-USB-On-The-Go-Full-and-HighSpeed-interface presentation there is two USB phy, one dual port HS phy and one single port FS phy. In my understanding I should be able to enable 3 USB host port, two HS and one FS. I am using the STM32CubeMX tool but I am unable to enable such 3 ports. I am able to enable two HS port but I am unable to enable OTG port. If I disable one HS port I am able to enable OTG port. So it seems STM32CubeMX allows to enable only two ports at the same time.   Is this an issue of STM32CubeMX or it's a real limitation of the chip ? Note, I have tried with different package with the same results   Many thanks in advance for any help

 IOC UI is changed this UI.I want to use another UI.Could you help me? plz

Hi,i'm trying to follow this guide for my STM32MP157D-DK1: https://wiki.st.com/stm32mpu/wiki/Getting_started/STM32MP1_boards/STM32MP157x-DK2/Let%27s_start/Populate_the_target_and_boot_the_image When try to download the Starter package from https://www.st.com/en/embedded-software/stm32mp1starter.html#get-software the "latest version" i get is ¨en.FLASH-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz", while according to the guide it should be "en.flash-stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21.tar.gz". In the older package there is no tsv file for the STM32MP157D. Kind regards

HelloI use https://github.com/STMicroelectronics/meta-st-stm32mp with the stm32mp15-disco machine.It boots fine, I can access the shell via USB-UART. But the display just shows an STM Logo from the Bootloader. What do I need to change, so the display works in Linux?This is the error when trying to start X:root@stm32mp15-disco:~# startx xauth: file /home/root/.serverauth.724 does not exist X.Org X Server 1.21.1.8 X Protocol Version 11, Revision 0 Current Operating System: Linux stm32mp15-disco 6.1.28 #1 SMP PREEMPT Thu May 11 14:04:52 UTC 2023 armv7l Kernel command line: root=PARTUUID=e91c4e10-16e6-4c0e-bd0e-77becf4a3582 rootwait rw console=ttySTM0,115200 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log fi

Hello all, i tried to search for a solution within the STM community but none of the solution helps.Please guideI have using a STM32MP157F board. I have set the dev board according to the manual. I followed the instructions  in this guide to get me started on installing the programmer Getting started with STM32MP157x Evaluation boards: However, on launching the STM32CubeProgrammerLauncher I get the following error. /home/STM32MPU_workspace/tmp/en.stm32cubeprg-lin-v2-16-0/jre/bin/java -jar STM32CubeProgrammerLauncher/home/STM32MPU_workspace/STM32MPU-Tools/STM32CubeProgrammer-x.y.z/binCubeProgrammer version: 2.16.0Path CubeProgrammer version: : /home/STM32MPU_workspace/STM32MPU-Tools/STM32CubeProgrammer-x.y.z/bin/versionUpdater version:1.1.7/home/STM32MPU_workspace/STM32MPU-Tools/STM32CubeProgrammer-x.y.z/binAnalytics - Current Software Path: /home/STM32MPU_workspace/STM32MPU-Tools/STM32CubeProgrammer-x.y.z/CubeProgrammer version: 2.16.0Path CubeProgrammer version: : /home

I have STM32CubeMX Version 6.10, STM32CubeIDE Version: 1.14.1with installed BSP STM32Cube_FW_MP13_V1.0.0When I create new bare project starting from evalboard STM32MP135F-DK as bare metal projectthen select NETXDUO, THREADX in Middleware and Software Packs...but settings related to NETXDUO is grayedThe project can be compiled... but  generated code did not have included libraries to use THREADX and NETXDUO (compared to examples from BSP Applications projects)Thanks in advance for any suggestions... how to generate correctly project with MiddlewaresRegardsRadim

STM32CubeIDE 1.15.1 was released on st.com as well as an in-tool update patch aligned with STM32CubeMX v6.11.1 that is available for download. Main issues fixed in this patch: Ticket 177978 : Fixed an issue with ST-LINK firmware upgrade concerning the boards with DFU v2 or older in the version 3.14.5 of ST-LINK GDB server. Ticket 178127 : Fixed an issue with the build settings: The build settings do not save the latest linker modified by the user and select the default linker instead. Check the errata under this link for more details. Where do I obtain STM32CubeIDE 1.15.1? For IDE 1.15.1: STM32CubeIDE - Integrated Development Environment for STM32 - STMicroelectronics Or update your current installation of STM32CubeIDE using: Help > Check for updates.

Hi everyone,i am creating a custom machine on a STM32MP151CAA3T using mickledore as yocto layer.when i flash my image, the falshing stops on the first partition, when uses tf-a-usb.stm32 file.What is this file, how is generated and how i customize it in order to have no more this error during flashing?Thanks.

I'm not good at english I tried using stm32cube programmer uart mode.but  "Error: Activating device: KO. Please, verify the boot mode configuration and check the serial port configuration. Reset your device then try again..."  returned I'm using stm32mp135 custom board, so i read stm32mp135 datasheet and found this part  I'm worried about USART3/6 and UART4/5/7/8 on "default pins"I use uart4, but use another pin set.uart4_TX -> PA9uart4_RX -> PD8 Is the error related to this part? 

DearsI would like to create new project from STM32Cube_FW_MP13_V1.0.0 - based on template "BSP_BasicTemplates"I verified Properties for this project under "Paths and Symbols" - Includes, Libraries, Source ... all looks normal as another project from Application subfolderBut compilation stop on error make -j12 all make: *** No rule to make target 'C:/Users/Drivers/CMSIS/Device/ST/STM32MP13xx/Source/Templates/gcc/startup_stm32mp135c_ca7.c', needed by 'Example/STM32CubeIDE/startup_stm32mp135c_ca7.o'. Stop."make -j12 all" terminated with exit code 2. Build might be incomplete.Where could be problem ? I hope that templates should have all properly configured... Best RegardsRadim

Hello     We are using STM32CUBE ide (Ver 1.9.0) for debugging of stm32mp157a cortex-m4 core by using j-link programmer. In this, while entered into debug every time we need to select stm32mp157a cortex-m4 in j-link target settings. So, any option is available for store this j-link configuration. It May help and save the time.regardssrikanth

Hello,following this wiki article I'm trying to debug the sample user space application, but getting this error:It seems, I have a working serial and SSH connection to the target but the Target Status widget always shows 'Serial console in use':My Debug configuration looks similar to the wiki article: I appreciate any help!

I am using STM32CubeIDE v1.4.2 and experiencing issues with editing IOC files. I am using Ubuntu 18.04.05 as recommended by ST. Often when when I am using the integrated Cube MX editor I experience 100% CPU load and the IDE locks up. I have tried increasing the Java heap size to 4MB. 3 years ago I did a project using the separate Cube MX program and had no issues with it but since ST integrated it into the IDE it seems pretty much unusable. Does anyone have any ideas how to make this software operable?

Hello,Can a line entry be added to a TSV file to flash the OTP partition?If yes, is there an example TSV file?If not, would the line below work?#Opt    Id       Name     Type      IP       Offset    BinaryP       0xF2     otp      Binary    none     0x0       otp.binThanks!

Hello, Using Windows 10 with WSL 2.I have an STM32MP157D-DK1 board and am following the ST guides to get this running. I'm trying to run bitbake to build a basic distribution image, but I keep getting this error. I tried googling but can't find anything relevant. This feels like a i setup something wrong issue ... but I went over the steps I'm supposed to follow and I can't see what I missed. Any help would be much appreciated ERROR: gnu-config-native-20230216+gitAUTOINC+63acb96f92-r0 do_populate_lic: QA Issue: gnu-config-native: The LIC_FILES_CHKSUM does not match for file://config.guess;beginline=9;endline=29;md5=10922f9231863a06f6efb67691fa46e0gnu-config-native: The new md5 checksum is aab8c8aed27a111587ec0289288c7ac8gnu-config-native: Here is the selected license text:vvvvvvvvvvvvvvvvvvvvvvvvvvvv beginline=9 vvvvvvvvvvvvvvvvvvvvvvvvvvvvv# This file is free software; you can redistribute it and/or modify it# under the terms of the GNU General Public License as published by

I stay trying this:https://community.st.com/t5/stm32-mpus-other-tools/stm32mp15-eco-5-0-0-rerun-bitbake-causes-errors-no-eula-shown/m-p/597709#M180to put Yocto in my stm32mp157d-dk2 with issue cd stm32mp157-dk2/repo init -u https://github.com/STMicroelectronics/oe-manifest.git -b refs/tags/openstlinux-6.1-yocto-mickledore-mp1-v23.06.21repo sync -j4DISTRO=openstlinux-weston MACHINE=stm32mp1 source layers/meta-st/scripts/envsetup.shbitbake st-image-westonhttps://gist.github.com/neuberfran/a21e72be5a7e3cada0721d5d400d17f4Final part of the issue in screen:| with preprocessed source if appropriate.| Please include the complete backtrace with any bug report.| See <https://bugs.linaro.org/> for instructions.| make: *** [/home/neuberfran/stm32mp157-dk2/build-openstlinuxweston-stm32mp1/tmp-glibc/work/stm32mp1-ostl-linux-gnueabi/m4projects-stm32mp1/1.6.0-r0/Makefile.stm32:64: /home/neuberfran/stm32mp157-dk2/build-openstlinuxweston-stm32mp1/tmp-glibc/work/stm32mp1-ostl-linux-gnueabi/m4