STM32CubeIDE (MCUs)

Terminals usually provide an adjustable new-line behaviour, so that you can select which character should be interpreted as a new line. The current behaviour requires CR+LF, which is just inconvenient.

I have Arduino program how covert it to STM32CUBEIDE suggest me any websites or channel for applying logics and change the program to it tell me any forum where i could learn the logic and apply it to real world applications Here i have given the code below #define HIGH_SIDE_A 9 // High-side MOSFET on side A #define HIGH_SIDE_B 11 // High-side MOSFET on side B #define FREQUENCY 60// 60 Hz #define DUTY_CYCLE 100 // 100% duty cycle int dt=8333.33; //dead-time unsigned long period; unsigned long highStateDuration; unsigned long lowStateDuration; unsigned long lastChangeTime; bool isHighState = true; void setup() { pinMode(HIGH_SIDE_A, OUTPUT); pinMode(HIGH_SIDE_B, OUTPUT); period = 1000000 / FREQUENCY; // Period in microseconds highStateDuration = (period * DUTY_CYCLE) / 100; // High state duration lowStateDuration = highStateDuration; // Low state duration is equal to high state duration } void loop() { unsigned long currentTime = micros(); if (isHighState &&amp

Hello,I'm trying to validate on target a CNN neural network in stm cube IDE (the target is the board STEVAL-STWINKT1B) but I alwais find an error:C:/ST/STM32CubeIDE_1.16.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.12.3.rel1.win32_1.0.200.202406191623/tools/bin/../lib/gcc/arm-none-eabi/12.3.1/../../../../arm-none-eabi/bin/ld.exe: cannot find -l:NetworkRuntime900_CM4_GCC.a: No such file or directory collect2.exe: error: ld returned 1 exit status make: *** [Makefile:85: Debug/mxAI1769727189411900.elf] Error 1 Automatic build and run failedThe validation on desktop run well but the validation on target return this error both with random data in input and with data entered manually.I'm working with this network:https://drive.google.com/file/d/1FizAT25KlB1PKellG3EwzSmL5bcMf7Kx/view?usp=sharing

Hello everyone,I've just updated cubeIDE from V1.14.x to V1.15.1 and duration of build process on the same project increased by around 4x.  With V1.14 it took around ~10s, now with V1.15.1 takes ~40s to build the same project on the same machine.  Is that a known issue? How can I mitigate that? Thank for your help!BR, Žiga

[SOLVED - It was a bouncy ground on the programming connector on the second PCB] Hi,I have two version of the same PCB only with minor HW differences which also require minor SW differences. So I made a copy of a project folder that works and renamed the folder. Then in CubeMX I also renamed the project itself. It compiles but when I try to download it onto the micro - using the same Segger's J-Link I always use - it:1) does not download the code onto the micro2) instead of opening the source code window it shows error:No source available for "(gdb[6].proc[42000].threadGroup[i1],gdb[6].proc[42000].OSthread[1]).thread[1].frame[0]"but the main() source file (and other ones) are there and already opened.3) it restarts the PCB running the old code (extremely different in functionality including which LEDs are on, so it's very obvious it is the old code) The output window is shown below. From the output window, it seems the communication between the J-Link and the PCB is ok,

I'm using the latest version, STM32CubeIDE1.6.1, to develop and debug code for STM32G0B1VE.However, In the SFRs register list I don't even see the USB or FDCAN registers!!!What was wrong? The STM32G0B1VE claimed the support of USB and FDCAN. Where are they?

How do I rename (proper way) an STM32 project?If I press F2 I can rename the name of the project, but the project folder still have the same name. If I change the name of the folder, then I get errors.Why?Is there a proper way to rename a project?I'm using STM32CubeIDE 1.3.0.

Hi,I am unable to generate the code with STcubeIDE for STM32H747I, will any one help me to sort this issue.Version Details:STcubeIDE : 1.13.1CubeMX: 6.9.1The error message is attached below

  what is the solution  

debugger window in STM32CubeIDE.

I created a project in TouchGFX Designer for the Nucleo-H563ZI dev kit as suggested by ST for projects that use TouchGFX.  Once created I imported the existing project into STM32CubeIDE which was fine, however the project explorer in STM32CubeIDE does not show the .ioc file even though it exists in the actual project files.I tried to copy a link to the .ioc into the CubeIDE project explorer but when I try to open it the IDE says it's not part of the project, however I can open it in CubeMX and generate files just fine.  What am I missing?  

Hi, I am new to the st environment, and trying to learn how to use cubeIDE. I am on a mac, with an external high DPI monitor. While I've figured out how I can increase the font size to made the UI easier to navigate, I can't figure out how to increase the size of the icons in the topmost toolbar. Various searches online seem to predominantly feature enabling a "high DPI scaling" option in Windows (which doesn't exist on a mac), or editing an ini file with the following: -Dswt.enable.autoScale=true -Dswt.autoScale=200 -Dswt.autoScale.method=nearest which seems to have no effect on the mac. Is the icon size adjustable in cubeIDE on macs?  

Hi,I have a project in STM32CubeIDE and I use the 'Build Project' option to generate the project binary.Now, what I want to do is to generate that binary from GitLab CI/CD. To do this, I have registered a GitLab runner on a Linux machine with all the different tools installed.What command do I have to run in the GitLab pipeline?I tried to run 'make -j12 all' in the pipeline but I got the following error:arm-none-eabi-gcc: error: unrecognized command line option '-fcyclomatic-complexity'Middlewares/mcuboot/subdir.mk:76: fallo en las instrucciones para el objetivo 'Middlewares/mcuboot/bl2_main.o'make[1]: *** [Middlewares/mcuboot/bl2_main.o] Error 1make[1]: *** Se espera a que terminen otras tareas....arm-none-eabi-gcc: error: unrecognized command line option '-fcyclomatic-complexity'Middlewares/mcuboot/subdir.mk:76: fallo en las instrucciones para el objetivo 'Middlewares/mcuboot/caps.o'make[1]: *** [Middlewares/mcuboot/caps.o] Error 1arm-none-eabi-gcc: error: unrecognized command line o

Good morning to all,we are struggling with watchpoint feature. We have set up the watchpoint as showed in the picturebut the watchpoint never get triggered.We are using NUCLEOU575 board and we are debugging through the on board USB connector.We have also tried to change the variable name with its memory location and set the condition as(*memory_address) == 500but again no trigger occurs.Are we missing something?Thank you in advance for your help.Best regards

Hi, I have been trying to follow the provided documentation for getting started with the Smartag1, but I am having trouble building it without errors. I have attached the files I have been trying to follow. I have been importing the project using this path: "...\STM32CubeFunctionPack_SMARTAG1_V3.2.0\Projects\STM32L031K6-SmarTag1\Examples\SmarTag1" which gives me invalid project path errors for the #includes in the main.c file. This is my project explorer:I have tried to edit the project paths such that the missing files are found but I then received the following: Could someone please explain what I have done incorrectly?  

good morning, I began today on a nucleo 144 and so discovered the double core.so I wanted to make each core work independently, and used a led blinking code. unfortunately, it only works on core M7 and not on core M4. I do not know why, maybe I misunderstood the fact that we have 2 cores.

Hellothe brand new 1.14.0 has the same issue like the older one.an unnecessary file is opened after the 2nd debug session.It's annoying that STM can't get this solved.padawan 

I would like to use the MotionFX Library with a STM32F401 and an ISM330BX IMU.  I am using STM32CubeIDE and have included the MotionFX software pack.  I cannot figure out how to define which ports I have connected to the IMU.  (For example, I have the SPI3 bus connected to the IMU.)  Where is this sort of hardware information defined?  I read the user manual UM2220 but it did not answer my question.  Any help would be appreciated. Sorry.  Rookie mistake.  I figured it out.

I am using the STM32F429I-DISC1 board and flashed code to the board using the STMCUBEIDE but when i am debugging i have encountered this error(attached the image). I have also tried the external loader file M29W128GL_STM32f4x9I-EVAL and also the flash loader file 0x429 but the same error repeating. anyone kindly suggest me a solution for this.

Hello, I encountered such an error while working on my software and I cannot solve this error. Can you help me with this issue?  

This sort of thing is a way of life with these ST tools (been using Cube IDE for 6 years on this project) but this one I am unable to fix. Is there some special setting needed under Debug (under project/properties)?   STMicroelectronics ST-LINK GDB server. Version 7.8.0Copyright (c) 2024, STMicroelectronics. All rights reserved. Starting server with the following options:Persistent Mode : DisabledLogging Level : 1Listen Port Number : 61234Status Refresh Delay : 15sVerbose Mode : DisabledSWD Debug : Enabled ST-LINK device status: UNKNOWNWaiting for debugger connection...Debugger connectedWaiting for debugger connection...Debugger connectedWaiting for debugger connection...Encountered Error when opening C:\ST\STM32CubeIDE_1.16.0\STM32CubeIDE\plugins\com.st.stm32cube.ide.mcu.externaltools.cubeprogrammer.win32_2.1.400.202404281720\tools\bin\STM32_Programmer_CLI.exeError in STM32CubeProgrammerShutting down...Exit. I've tried 2 x STLINK ISOL V3 and a STLINK ISOL

 I HAVE USED THE ST LOADER  YOU HAVE SUGGESTED FOR MY LAST PROBLEM AND NOW ALSO IT REPEATES TEH SAME PROBLEM THERE IS PROBLEM WHILE OPENING THE STM32_PROGRAMMER_CLI.EXE. SUGGEST ME A SOLUTION FOR THIS OR AN ALTERNATIVE. THIS IS THE DEBUGGER CONFIGURATION AND THE STLOADER I HAVE SELECTED.

I am desperately trying to get the USB interface to work on an STM32L422KBT6. On my custom-designed board, the microcontroller is connected to a USB port via two differential lines (D+ and D-). The board is powered by LDOs through the VBUS. Here is the board layout, with the BOOT0 pin subsequently pulled to GND (had forgotten to do that).In the Device Configuration Tool, under RCC, 'CRS SYNC' is set to 'CRS SYNC Source USB'. Under Connectivity -> USB, the checkbox for Device (FS) is checked, and under Middleware and Software Packs -> USB_DEVICE, 'Communication Device Class (Virtual Port Com)' is selected as the Class For FS IP. Programming is done with the ST-Link V2 debugger via SWDP. The Clock Configuration is as follows:Regardless of whether I use MSI or HSI48 as the clock for the USB bus, I receive the error message: 'The last USB device you connected to this computer malfunctioned, and Windows does not recognize it.'Despite reading numerous application notes and much more, I

I had a STM32CubeIDE v1.15.1 static library project against which I was linking with no problems. The static library project created the lib*.a file fine.After moving the project to a different workspace, the lib*.a file is no longer created. Instead the final build step creates an archive file with ar.How do I change the tool settings in the static library project to use the g++ linker in the final build step rather than ar?

Hello,I would like to know if I can find and modify the script that runs when the green (Run as..) button is pressed (Flashing code to board), in the STM32CubeIDE.