STM32CubeMonitor (MCUs)

Hello,I am using STM32-U585I-IOT02A board. I have initialized USB-C SINK TCPP project with fixed 9V settings. On STM32CubeMonUCPD, 'ibus(mA)' value is always zero when connected BMS board shows charging current more than 1A. Please let me know if I missed something. Thank you.

Hello,I would like to use a CSS class on stm32cubemonitor on a button or on some text. Do you have a tutorial or an example to use this option? Please.Best regards  

I was trying to create a bar chart that represent some PIDs in my OBD2 Emulators Project.However, in Cube Monitor, I think that when creating chart graphs or line graphs, the Cube Monitor can not provide an option to assign text above every bar in a bar chart or assign a text along each line in a line graph. I believe that the Cube Monitor chart graphs can only provide "legends" and not anything else. It also can not edit the legends to change their text.Can you confirm this please? If not then can you guide how to achieve assigning text on each bar, if possible?

I ran the CubeMonitor-UCPD app on my MacBook Pro(M1 pro, MacOS Sequoia 15.0.1), but it didn't open properly.Does the app support MacOS 15?

Power measurement with the STLINK-V3PWR does not work on my notebook because the USB 3.0 port cannot supply enough power. The PC software STM32CubeMonitor-Power - v1.2.0 reports "error Power measurement not available. Please use a more powerful USB port." With an existing USB 2.0 hub with power supply it does not work either. Is there any recommendation with which USB hub (with additional power supply) it works?Is there another workaround?

Hello,Would it be possible to have the correspondence of the JSON type according to the type of variable we put? PleaseI've been able to identify a few such as :type 1 -> uint8_ttype 3 -> uint32_tBest regards  

Hello,I am using the latest version of STM32 Monitor with STLink V3 probes, and everything is working correctly.My only issue is the refresh rate of the STLink probe status on STM32CubeMonitor, which is currently 20 seconds. We are performing frequent reprogramming of our boards for development, and we need to reduce this time to 5 seconds.I tried the method suggested on the STMicroelectronics wiki, but I couldn't find the specified value in the folder \STM32CubeMonitor\resources\app\node_modules\@stm32\stm32cubemonitor-stlink-protocol\.Could you please guide me on how to adjust this value?Best regards,

Hi, I am already able to visualize the data throuhg the monitor plot. I am trying to control a digital LED on the STM32 Cube Monitor based on a comparative condition. For example if I have two values being pooled, how can I set the thresholds between the values so that the LED has a TRUE or a FALSE state?

Dear Sir, I've been using CubeMonitor to monitor data for quite a while, and it really is a convenient tool.I recently started developing a new system with new MCU, STM32H5.However, when I use CubeMonitor to monitor the data, the data remains 0 all the time, as shown in the image.I have checked the variable in the IDE, and the variables indeed have normal values.

Hello A new version 1.9.0 of STM32CubeMonitor is available on st.com. You can download it on https://www.st.com/en/development-tools/stm32cubemonitor.html Click on "Get latest" to download the version 1.9.0. What are the changes in this version ? Update of Node-Red to version 4. Possibility to use the write operation with SEGGER J-Link probes to write data in the target memory New STM32 devices added.   Do not hesitate to create new posts if you have any question. The STM32CubeMonitor team.

Hi, I am getting the following error when trying to deploy:PayloadTooLargeError: request entity too large  at readStream (C:\Users\JonoM.AFRICA\AppData\Local\STM32CubeMonitor\resources\app.asar\node_modules\raw-body\index.js:155:17)  at getRawBody (C:\Users\JonoM.AFRICA\AppData\Local\STM32CubeMonitor\resources\app.asar\node_modules\raw-body\index.js:108:12)  at read (C:\Users\JonoM.AFRICA\AppData\Local\STM32CubeMonitor\resources\app.asar\node_modules\body-parser\lib\read.js:77:3)  at jsonParser (C:\Users\JonoM.AFRICA\AppData\Local\STM32CubeMonitor\resources\app.asar\node_modules\body-parser\lib\types\json.js:135:5)  at Layer.handle [as handle_request] (C:\Users\JonoM.AFRICA\AppData\Local\STM32CubeMonitor\resources\app.asar\node_modules\express\lib\router\layer.js:95:5)  at trim_prefix (C:\Users\JonoM.AFRICA\AppData\Local\STM32CubeMonitor\resources\app.asar\node_modules

Hi,I am looking for a STM Nucleo board which can support output voltage of 5V and parallelly can monitor the real time current graphs using any software (Ex: STM32powermonitor..etc). Currently I am using "STMICROELECTRONICS Expansion Board, STM32L496VGT6 MCU, Power Consumption Measurement, for STM32 Nucleo" which can support till 3.6vI am ; looking for a similar board that supports 5v.Please let me know if there is any. Thanks

安装Cubemonitor后，许多组件无法正常工作。我不知道为什么。我的安装环境有问题吗？但是我已经搜索了一些信息，我已经安装了JRE环境;仍将发生以下错误;  

In the cube monitor I didn't have acquition in and acquition out nodes , how can I add these nodes to my pallette and send me the links to install these nodes to my pallette

Dear Experts,I am a new user for Cube-monitor.I want to output data buffer graph on the cube-monitor screen.The data buffer unit size is 16 bits and total is 1024.(declaration will be "uint16_t buffer[1024];")Is this possible and if so, how do I do it? Can you provide a guide?Also, I want to save the data buffer as file for analysis. Is this possible?Thanks in advance for your helpBest Regards,Tommylim

Hello A new 2.15.1 version of STM32CubeMonitor-RF is available on st.com. You can download it on https://www.st.com/en/development-tools/stm32cubemonrf.html Click on "Get latest" to download the version 2.15.1. What are the main changes in this version ? Add support of STM32CubeWB05N devices (firmware 1.5.1) Changes details can be found in release note Do not hesitate to create new p

As a Fedora user, finding that STM32CubeMonitor is only distributed for Linux as pair of .deb packages for Ubuntu was a disappointment. So I created a container to run it in. This may also help those running newer versions of Ubuntu LTS, which is incompatible with the supplied .debs.https://github.com/mobilinkd/STM32CubeMonitorI hope this is not needed for long and that ST will package this software for use on a wider range of Linux systems. Or maybe publish their own sets of containers for Linux.

I am using STM32CubeMonitor with the STM32H503CBT6, but I can't observe my variables. Previously, I used the STM32F1, and it still worked.

Hello, I'm using a STM32G0B1RE and a nucleo SRC1M1 in order to charge and communicate with a tablet in power delivery mode with 5V 3A. I followed the following tutorial: STM32StepByStep:Getting started with USB-Power Delivery Source - stm32mcu (stmicroelectronics.cn) from STM, at first it kinda worked, I had a connection with the tablet in the traces with it confirming it does take 5V and 3A as well as the IN SOPs:002 H:0x0041 GOODCRC message but since it was connected on a hub, it kept turning on and off. So I took the cable for the ST off the hub and directly onto the computer (the nucleo is receiving 5V 3A from an external source) but since then when I go on the board selection and connect the tablet, it keeps disconnecting. I checked, there doesn't seem to be any loss of voltage, so I'm quite lost a

Hello A new 2.15.0 version of STM32CubeMonitor-RF is available on st.com. You can download it on https://www.st.com/en/development-tools/stm32cubemonrf.html Click on "Get latest" to download the version 2.15.0. What are the main changes in this version ? Add support of STM32CubeWB0 devices (firmware 1.0.0) Alignment with STM32CubeWB firmware 1.20.0 Alignment with STM32CubeWBA firmware 1.4.0 Upgrade Java® runtime version Changes details can be found in 

Hello, How could I save the configuration of the STM32CubeMonitor? It is painful and dangerous to have always to set the Voltage.... Best regards Mich

I've started using the recently published UM3291 to have smoother workflows with my other acquisition tools There are a few glitches that makes life a little bit more annoying than it should be.- The first one beeing the prompt "stlp >", which has to be filtered out. A disable prompt would save some code.Especially when using command during ascii streaming where it prefixes a measurement when sending a command like targrst.- The new line configuration works better when setting CR or LF rather than CR+LF. Otherwise, there is one blank line after each line with content.- The table 28 gives ascii data format. The example does not match that format.According to the table, the lenght is always 8 characters. The example is 7 character long. The byte 6 is missing (-7, instead of -07).- There should be a response pattern : [ack|error] [command] : [response]. Some commands do not match such a pattern, like whoam

Hello!I've been trying for a while to download the STM32CubeMonitor (STM32CubeMon-Win) from:https://www.st.com/en/development-tools/stm32cubemonitor.html However, everytime I try to download, I get the following error.Obviously I am logged in but it still refuses to give me the download link.If I try to login "again" by clicking "Login/Register", it sends me to the same page and same thing happens again. However, the most important

When I open STM32CubeMonitor-Power (V1.2.1) the initial window is too large and spans both of my screens.My setup is HP Evny 17 laptop - Windows 11 (home) with 4K screen (3840x2160), secondary monitor full HD (1920x1080).Fortunately I can still access the window title bar to move the window down to access the maximise / minimise icons.Minimising winodw to task bar and reopening has same issue. Only if I Maximising does the window fill my 4K screen  or secondary screen corrently.. Could be Windows 11 issue!!!, any idea's?

I am trying to write to a memory location for a nucleo board. As far as I have seen so far the simplest way to do this is as follows: This can be problematic when the code changes and the memory address shifts for the variable I'm interested. I'm sure there is a simple way in which you can write to a variable in the same way that you read but I'm not sure how to do that. Would anyone be able to explain how to for me? Thanks!