STM32CubeMonitor (MCUs)

Hi, please can someone help me?when I try to deploy I get the following error:Spoiler (Highlight to read)PayloadTooLargeError: request entity too largeat readStream (C:\Users\diego.mavillonio\AppData\Local\STM32CubeMonitor\resources\app\node_modules\raw-body\index.js:163:17)at getRawBody (C:\Users\diego.mavillonio\AppData\Local\STM32CubeMonitor\resources\app\node_modules\raw-body\index.js:116:12)at read (C:\Users\diego.mavillonio\AppData\Local\STM32CubeMonitor\resources\app\node_modules\body-parser\lib\read.js:79:3)at jsonParser (C:\Users\diego.mavillonio\AppData\Local\STM32CubeMonitor\resources\app\node_modules\body-parser\lib\types\json.js:138:5)at Layer.handle [as handle_request] (C:\Users\diego.mavillonio\AppData\Local\STM32CubeMonitor\resources\

I have a characteristic that supports write and indicate. A command is written to the char, the server responds by indicating the characteristic to the client. I'm using Stm32CubeMonitor-RF 2.19.0 to test the server, but indications always cause a ACI_GATT_PROC_TIMEOUT_EVENT because STM32CubeMonitor-RF does not issue a ACI_GATT_CONFIRM_INDICATION after an indication is received. log file attached. 

Hi;I am trying to dial in a PID controller, and my values are small (0-1 range). The Chart widget seems to want to always set its Y axis bounds to [-10, 10], which makes it hard for me to see what's going on in realtime. I have to make an adjustment, then pause the acquisition to scroll way in to see what happened. Is there a way for me to manually specify the Y axis scale and have it stay persistent?

I want to use STM32CubeMonitor-RF's scripting feature to automate BLE tests, but I'm having troubles right from the start: Send(ACI_GAP_CREATE_CONNECTION;0x01D0;0x01D0;0x00;<client address>;0x00;0x0040;0x0040;0x0000;0x015E;0x0015;0x0015)Wait(500)Send(ACI_GATT_DISC_ALL_PRIMARY_SERVICES;<connection handle>)ACI_GATT_DISC_ALL_PRIMARY_SERVICES needs a connection handle, which is only known at runtime, it would need to be extracted from a response to the ACI_GAP_CREATE_CONNECTION command. is this possible, or is it possible to set the handle to a constant value?

Hello A new release of STM32CubeMonitor-RF is available on st.com. Click on "Get latest" to download the version 2.19.0. What are the main changes in this version ? Alignment with STM32CubeWB firmware 1.24.0. Alignment with STM32CubeWBA firmware 1.8.0. Alignment with STM32CubeWB0 firmware 1.4.0. Upgrade of Java® runtime version from 21.0.4 to 21.0.8 Upgrade supported OpenThread version to 1.4.0 API 511 Bug fix Changes details can be found in the  release note RN104 and

Hello,I am trying to use STM32Cube Monitor USB PD with custom board.I see ST link v3 minie on a trace port. but I can't see any traces at all. Is there a dedicated package in CubeMX i can enable to see USB-PD traces ? Thank you. 

Hi;I recently started playing with CubeMonitor - it's fantastic. I am using it to troubleshoot/fine tune a motor control project I'm working on - specifically, I am graphing the values I'm calculating for Space Vector Modulation to make sure things are working as I expect. Something odd I notice are these strange "glitches" in my waveforms:There is nothing obvious I can find in my algorithm that might cause these - I am wondering instead if they might be coming either from 1) some nuance in C I might not be aware of, or 2) something I don't have configured properly in CubeMonitor. To check

Hi; I'm trying to come up to speed with CubeMonitor. I found this video:https://www.youtube.com/watch?v=YWjvHhgqvm4and there is a third video:https://www.youtube.com/watch?v=taiRu-wZmmYbut I can't seem to find the second video, which seems kind of important to just understanding how to set up the basic project and orient onesself to the UI. Is this video online anywhere?

Hello The version 1.11.0 of STM32CubeMonitor is available on st.com :  https://www.st.com/en/development-tools/stm32cubemonitor.html What are the main changes in this version ? Node-RED® updated to version 4.1.0. STM32 devices list updated. Native support of Arm based mac. ( “universal build” is used : the application support both arm and intel architectures) Software dependencies updated ( Electron, Chromium, nodeJS) The release note is available on ST.com : https://www.st.com/resource/en/release_note/rn0119-stm32cubemonitor-release-v1110-stmicroelectronics.pdf Do not hesitate to create new posts if you have any question.

Iam using cube monitor which is off course a very useful tool for debugging but only difficulty iam facing is when i disable the variables which i don't want to see or completely invisible, could you please bring in something so that it can be visible even if disabled. Ex image belowIf you see above image the disabled variables are completely invisible for me to make them enable again. 

-

 Hello Experts,Reviving this topic as the referenced video and suggested solution zip file are not available.https://community.st.com/t5/stm32cubemonitor-mcus/can-a-variable-be-modified-by-using-it-s-name-instead-of-it-s/td-p/87737 BTW I would expect such an ubiquitous feature to be already included in CubeMonitor. Perhaps my oversight but I could not find such a feature. I have a program with hundreds of variables I need to control from CubeMonitor, babysitting their addresses or spending ages updating them after every compilation is not practical.Thank You,-Alon. 

Hello,Currently I am facing a issue where my CUBE monitor is not able to parse the ELF files. It gets stuck at 10% completion while loading it. I have attached my workflow below:The Error is as follows: 

Hello, I am using the STM32CubeMonitor software for the first time and find it very helpful. My question is about the root cause for erroneous zero values in the time series displayed by the STM32CubeMonitor software. It's first first use was monitoring the joystick x/y displacement signals of the Adafruit Gamepad QT. Question: What is the root cause for the phenomenon of erroneous zero values? Are parameters in my Basic Flow configuration incorrect? (Note: the zero values are not consistently present in the graphs, sometimes the signals are 'clean'.)Question: where are the Monitor Flow files saved on disc (Windows 11).Technical details:Figure 1 shows the test setup with the Gamepad and the Nucleo-G071RB board. Pairs of 16-bit data points were received by the Nucleo board using the I2C protocol (hi2c1). I confirmed that the x/y signal integrity was good: no outliers or erroneous values were received by the Nucleo board, the I2C master.

I installed Manjaro Linux, downloaded STM32CubeMonitor from the official website, and then installed it via yay by replacing the package’s cached file with the official one:rm -rf .cache/yay/stm32cubemonitor/en.stm32cubemon-lin-v-1-10-0.zipmv stm32cubemon-lin-v-1-10-0.zip .cache/yay/stm32cubemonitor/en.stm32cubemon-lin-v-1-10-0.zipmakepkg -siWhen I launch stm32cubemonitor, I get the following error messages:29 Jul 09:49:09 - [info] Server now running at http://127.0.0.1:1880/29 Jul 09:49:09 - [warn] Encrypted credentials not found29 Jul 09:49:09 - [info] Waiting for missing types to be registered:29 Jul 09:49:09 - [info] - acquisition out29 Jul 09:49:09 - [info] - acquisition in

For well-known reasons, I'm developing on STM32F4 using DAPLink, but encountered an issue when trying to track analog signal variations with STM32CubeMonitor. CubeMonitor seems unable to detect DAPLink. Is there any solution to resolve this problem?

Hi.Trying to connect a STM32G0 USB PD discovery kit using the linuxsoftware package. Device is detected find, just opening the serialport gives reasonable output (binary data which look like PDmessages). However the Java app doesn't work.On linux machine 1, it crashes with a segmentation fault in libX11# # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007f3c022e0661, pid=2060337, tid=0x00007f3bbd1bb6c0 # # JRE version: OpenJDK Runtime Environment (8.0_412-b09) (build 1.8.0_412-b09) # Java VM: OpenJDK 64-Bit Server VM (25.412-b09 mixed mode linux-amd64 compressed oops) # Problematic frame: # C [libX11.so.6+0x18661] XInternAtom+0x41 # # Core dump written. Default location: /tmp/core or core.2060337 # # An error report file with more information is saved as: # /tmp/hs_err_pid2060337.log # # If you would like to submit a bug report, please visit: # https:

Hello A new release of STM32CubeMonitor-RF is available on st.com. Click on "Get latest" to download the version 2.18.0. What are the main changes in this version ? Alignment with STM32CubeWB firmware 1.23.0. Alignment with STM32CubeWBA firmware 1.7.0. Alignment with X-CUBE-WB05N_V2.0.0 Upgrade supported OpenThread version to 1.4.0 API 377 Support of Command Line Interface (CLI) : Add the possibility to send some commands or start scripts from command line Bug fix Changes details can be found in the  release note RN104 and User manual UM2288 Do not hesitate to create new posts if you have any question. The STM32CubeMonitor-RF team.

Dear all,haven´t yet found topic like this.I would like to...(need) make a windows executable file / application from a Cubemonitor flow.Any Idea if and how possible? Thanks and have a great day!

Hello. I can plot an array in STM32CubeIDE, STM32CubeMonitor and Keil uvision with the Time Graph or Logic analyzer in Keil using this function and viewing signal_sample: void plot_signal(uint32_t delay){ for(int i=0;i<_5HZ_SIGNAL_LEN;i++){ signal_sample=_5hz_signal[i]; for(int j=0;j<9000;j++){} // Delay } } The problem is that in all the software above, this gets plotted like a step plot, because the sample rate of the trace is so high it samples the constant value between the Writes to the signal_sample:  Example from keil. This is

Hello, I want to use STM32CubeMonitor to debug the code. The .elf is imported into CubeMonitor, and the connection is built. However, clicking on "Deploy", the follow error message shows: "TypeError: Cannot read properties of null (reading 'variablelist')". I check the .elf file, it really contains "null".  The .elf is generated in STM32CubeIDE. The code can be excuted in both debug and normal run mode without problem. But the .elf contains "null". How to solve this problem? Thanks for support!STM32User

Dear Expert,I could view an array-buffer thanks to "https://community.st.com/t5/stm32cubemonitor-mcus/how-to-watch-an-array-using-stm32cubemonitor/td-p/225086/page/2"Following flow is my test-flow blocks. Cube-array block was referenced from above link.When I tried to draw double graphs, I can see only one graph is updated.(following is captured image, where upper graph is updated but bottom graph is not updated.)

We were following the ULPMark™-CoreMark User Guide for getting the ulp mark score but the STM X-NUCLEO-LPM01A is always throwing up some error and the LD2(ErrorLED) turns on causing issues. Also if in the case it runs its always telling    “>! Validation failed, too little runtime: 0.014000000000000234” “>! Set iterations above 749999 for Energy run”. Even after using the same parameters its throwing the same error. Also at 1ms the connection is never achieved and fails.It would be great if you can guide us on this.

Hello ST Community,I'm using STM32CubeMonitor-Power (latest version) with an X-NUCLEO-LPM01A board (firmware v1.0.8), and I'm facing an issue in static current measurement mode.Problem Description:In standalone

Hi Is there a way to communicate with the STLNK-V3PWR to extract current consumption?  (the Acquisition & Replay output).  I would like to communicate with it via Python (or other language) to automate current consumption measurements? Thank you.Pete.