I2C Slave RX callback doesn't called Hello everyoneI am using NUCLEO-H563ZI as master I2C, and STM32F412G-DISCO board as slave I2C, which should mimic temperature sensor TMP117.I am trying to send from master to slave a register number to read from, but the rx callback in the slave doesn't called.Master configuration: Master code:int16_t TMP117_ReadTemperature(uint8_t TMP117_ADDRESS)
{
uint8_t data[2];
uint16_t i2c_address=TMP117_ADDRESS<<1;
uint8_t reg=TEMP_RESULT;
const uint16_t TIME_OUT=100;
HAL_StatusTypeDef err=HAL_I2C_Master_Transmit(&hi2c1, i2c_address, &reg, 1, TIME_OUT);
if (HAL_I2C_Master_Receive(&hi2c1, TMP117_ADDRESS<<1, data, 2, HAL_MAX_DELAY)!=HAL_OK){
HAL_GPIO_WritePin(GPIOF, GPIO_PIN_4, GPIO_PIN_SET);
HAL_Delay(1000);
HAL_GPIO_WritePin(GPIOF, GPIO_PIN_4, GPIO_PIN_RESET);
}
int16_t temp = (data[0] << 8) | data[1];
return temp;
}Slave configuration: Slave code:void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint1
