STM32 MCUs Software development tools

Hi,I just installed STM32CubeProgrammer v2.17.0 on Linux.When I connect to the board (tried with several different ones), I get the following error;flash loader cannot be loaded. FlashLoaderPath = /home/[yadayada]/bin/FlashLoader/0xI can read the flash, I can do everything, with the exception of flashing. This fails.I first thought it might be a truncated log message. But when I just copied any of the loader files and gave it the file name "0x", I didn't get the error message. So it really looks for a file named "0x". It looks like in the code, the assembly of the file name (all the files match the pattern 0x*.stldr) I tried to do an software update, but this also fails: "The updater package on server is corrupted"  

 Hello,I am encountering an issue with the ST example projects "BLE_p2pServer" and "BLE_DataThroughput_Server" for the NUCLEO-WBA65RI board.After generating the code using STM32CubeMX (version 6.17), the project does not include all the required source files. As a result, the compilation fails immediately, even before making any modifications to the code.I enabled the option:"Generate peripheral initialization as a pair of '.c/.h' files per peripheral".The main issue is that the following file is missing:"stm32wbaxx_ll_utils.c" .It seems that some HAL/LL driver files are not being generated or included properly in the project.Could you please advise on:Whether this is a known issue with STM32CubeMX 6.17?If there is an additional step required to include all necessary driver files?Or if a specific configuration is needed for these BLE examples?Thank you in advance for your help.Best regards,Pierre A

Heyho, wanted to check if C5 might be good for next project and have a first look at MX2. Installed it, started project with C562 / Nucleo - and nothing happens, except for a short error message in the bottom right corner of the window: "error when downloading packs" ( + some file name). Further info: - Windows 11 - started MX2 first as normal user, then as admin, same behaviour - all other STM32 tools running fine (MX1, IDE, Prog)

hello ST Community,Is it possible to generate a binary file that is a *.elf file from a project developed by STM32CubeIDE?Using the correct settings for generating *.bin files.The *.bin file would be used to create a bootloader via UART for one of the STM32 microcontrollers.Thanks for your valuable support.  

Yesterday I was able to generate a cmake project which included main.c/h files. I opened the project in VS Code but had errors trying to build. I had VS code fix the errors so now I am able to build the project. Today, I generated another project but the main.c/h files are missing as seen in the screen shot. I've timed the project generation and it takes 3 minutes to generate a project. Why so long? Why are the IOC files created outside of the project folder?      

I'm having an issue with STM32CubeProgrammer v2.22.0. I'm making an external loader for the stm32U031R8 (on the nucleo board). My spi flash code works fine in the my actual application program. If I strip my code down (removing Read,Verify, instrumentation, etc) and get it under the 8K of SRAM1, the programmer works. Once my object is into SRAM2 (0x20002000-0x20002FFF) the programmer behaves incorrectly.First off, to make sure I understand whats going on, in the good case:every operation begins withw ap 0 reg 15 PC (0x20000000)w ap 0 reg 17 MSP (0x20000500)w ap 0 reg 16 xPSR (0x01000000)w ap 0 @0x20001CA0 : 0x00000200 bytes, Data 0x00000000...w ap 0 @0x20000000 : 0x00000004 bytes, Data 0x0000BE00...w ap 0 @0x20000004 : 0x0000186C bytes, Data 0xDEC0ADDE...Not sure why 0x20000500 is chosen as the SP, or what those 0x200 bytes written at 0x20001CA0 are, but I see that a bkpt instruction is written at the base of SRAM1 and then my object is written after that, which makes sense.Then I see

when you enable SWD in CubeMX2 it automatically blocks the SWO pin as well (tested using C531FBP6), but I only need SWCLK / SWDIO to debug. please add a way to disable the use of SWO.

Quick question. I am working on two projects:One is a dual-core project, and uses the STM32H755 and CMSIS-RTOS v2 over Free RTOS. I often have to debug two boards simultaneously.Another project is using STM32H573. This uses TrustZone and ThreadX (on the non-secure side).Both are currently managed via ST Cube IDE (Eclipse based of course) and debugging is already quite "complex".I can see advantages with VS Code, but moreover, I would not be surprised if the VS Code route becomes the de-facto standard some day (purely speculative of course), so I think I may need to start looking at it.Before I do, my question to the community is whether the VS Code option is yet mature enough for dual core and TrustZone projects?Many thanks in advance,Nick

Hi,I found an issue when generating code for a BLE application with STM32CubeMX v6.17.0.In particular, I have a service called DataTransferService with three characteristics:DataStreamCommandControlTransferStatusThe DataStream characteristic is configured as a notification with a fixed value length of 100 bytes.When I try to increase its length up to 250 bytes and regenerate the code, the following functions in custom_app.c are removed:Custom_Datastream_Update_Char()Custom_Datastream_Send_Notification()I have attached the .ioc file for reference.

I'm trying to configure and generate a project with STM32CubeMX for the STM32WBA5MMGHx BLE module.When enabling the STM32_WPAN middleware, the ADV_TRACE module gets automatically enabled under Utilities. This in turn requires to enable at least one UART/LPUART peripheral, otherwise type UART_HandleTypeDef is undefined and compiler throws and error:../../Core/Inc/app_conf.h:304:8: error: unknown type name 'UART_HandleTypeDef'; did you mean 'RTC_HandleTypeDef'? [build] 304 | extern UART_HandleTypeDef huart1; [build] | ^~~~~~~~~~~~~~~~~~ [build] | RTC_HandleTypeDefThe STM32_WPAN throws a warning about not configured/wrong Platform Settings.Is there any possibility to configure STM32_WPAN without ADV_TRACE enabled?Used STM32CubeMX version is 6.17.0 and WBA firmware v1.19.0 and cmake project is generated.

The list of #include in the main.c file is lost when regerating stm32cubemx with new GPIO config :Previous : /* USER CODE BEGIN Header */ /** ****************************************************************************** * @file : main.c * @brief : Main program body ****************************************************************************** * @attention * * Copyright (c) 2026 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ #include "main.h" #include "string.h" #include "exti.h" #include "embedrt_debug.h" #include <stdio.h> #include <stdbool.h>After regeneration with mx: /* USER CO

When I click this button, my mouse keeps spinning but the program does not open, and there is no error message. I tried using Refresh Data, but it had no effect.

HelloAs I am trying to connect the STM32N6570-DK board on the STM32CubeProgrammer, initially the STM32CubeProgrammer recognises my device as in the following picture: When I press Connect on the STM32CubeProgrammer I get awarning: Connection to device 0x486 is lostas in the following picture: and then an error that says Data read failas in the following picture: I am using a MacBook Air M3, 2024, but even on windows (running on a virtual machine) I get the same error on the STM32CubeProgrammer windows version.Is there a way to overcome this issue? What could be the cause? Thank you 

Hi,I encountered this bug with a previous update and after searching I added the -z noexecstack parameter as given in a 2025 post.That cleared the problem at the time. The IDE has updated itself to V2.1.1 and the bug has re-appeared, despite the noexecstack parameter still being present? Full error:C:/ST/STM32CubeIDE_1.19.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.14.3.rel1.win32_1.0.100.202602081740/tools/bin/../lib/gcc/arm-none-eabi/14.3.1/../../../../arm-none-eabi/bin/ld.exe: warning: C:/ST/STM32CubeIDE_1.19.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.14.3.rel1.win32_1.0.100.202602081740/tools/bin/../lib/gcc/arm-none-eabi/14.3.1/thumb/v7e-m+dp/hard/crtn.o: missing .note.GNU-stack section implies executable stack C:/ST/STM32CubeIDE_1.19.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.14.3.rel1.win32_1.0.100.202602081740/tools/bin/../lib/gcc/arm-none-eabi/14.3.1/../

Hello, This is a pretty straightforward bug report. For F767 Devices, when trying to configure dual boot mode over UART, the nDBOOT Option byte doesnt appear for Cubeprogrammer versions greater than v2.14 The typically workflow is1) uncheck nDBANK2) apply3) restart/reconnect4) nDBOOT option byte appears5) uncheck nDBOOT6) apply.This works on all versions of Cubeprogrammer using an STlink - good! But when executing this same sequence using the UART Bootloader on version v2.15 to v2.22, the nDBOOT option bytes never appears after step 3.  This regression is preventing us from using newer versions of CubeProgrammer. Best,Daniel   

Hi ST Support Team,I am using MXCube for STM32U5A5VJ. I have enabled the RTC, and cube generates the following Init Function. In this way, everytime I restart the controller, the RTC date is gonna be overwritten. In practice, I would like to have the bracket at line 9 down in line 21. Thank you for your support.Best Regards, Gianmarco Cerutti void MX_RTC_Init(void) { ... /** Initialize RTC and set the Time and Date */ if(LL_RTC_BKP_GetRegister(RTC,LL_RTC_BKP_DR0) != 0x32F2){ LL_RTC_BKP_SetRegister(RTC,LL_RTC_BKP_DR0,0x32F2); } RTC_TimeStruct.Hours = 0x0; RTC_TimeStruct.Minutes = 0x0; RTC_TimeStruct.Seconds = 0x0; LL_RTC_TIME_Init(RTC, LL_RTC_FORMAT_BCD, &RTC_TimeStruct); RTC_DateStruct.WeekDay = LL_RTC_WEEKDAY_MONDAY; RTC_DateStruct.Month = LL_RTC_MONTH_FEBRUARY; RTC_DateStruct.Day = 0x11; RTC_DateStruct.Year = 0x25; LL_RTC_DATE_Init(RTC, LL_RTC_FORMAT_BCD, &RTC_DateStruct); ... } 

Hi, I'm using stm32cubeide version 2.1.1 and version 1.15.1/windows11, both are compiling the same project on my PC at slower speed compared to a lab computer.(3min vs 20seconds) Any idea what could be causing the issue? Thanks!

@Mahmoud Ben Romdhane I am still seeing this on ST Cube MX 6.16.1 when generating for the STM32F723E-DISCO target. This is using the latest STM32F7 package, 1.17.4. Attached is my IOC file if that's helpful.I know its a trivial fix but wanted to report this is ongoing.

What could be the reason that configuring in CubeIDE SWV as enabled the MCU on debug flashes and stops responding? Flashing works fine both ways, SWO is connected. Time elapsed during verifying operation: 00:00:00.082Download verified successfullyTarget is not responding, retrying...Shutting down... Failed to read registers from targetError: Failed to set breakpoint at address: 0x80005c0.Error: Failed to set more breakpointsFailed to read all registers from targetExternal target MCU is STM32L412. STLink is upgraded to the latest version.Since flashing works, SWD is connected properly.MCU is configured as trace asynchronous Sw and there are no reconfiguration of SWD pins.  

I'm trying to create an empty project for the NUCLEO-U3C5ZI-Q using STM32CubeIDE v2.1.1 under MacOS. All available updates have been applied.I've used File/STM32 Project Create to create an STM32CubeIDE Empty Project for the NUCLEO-U3C5ZI-Q board (all settings at the defaults offered).The project is created, along with the startup and linker files, but there is no .ioc file.

Hello, I am using a firmware package with the System Workbench for STM32 IDE and would like to ask how I can configure a peripheral and integrate it into my code. Additionally, does it support code generation similar to STM32CubeMX? Thank you in advance!      

The CubeMX suddenly can't generate some .h files such as stm32f103xb.h, core_cm3.h, stm32f1xx_hal_rcc.h ..., I tried to use legacy CubeMX to generate but still the same.How to fix it?Left picture is what it should look like ,and the right one is the wrong one.

I have same error since days on differnt machines in different networks.While this is working:cube bundle list-online PS C:\git\nucleo-h753zi-canfd> cube bundle list-online Name : Platform Version --------------------------------------------------------------------- adoptium-jre : x86_64-windows ["21.0.8+9.st.2", "17.0.16+8.st.1", "17.0.15+6.st.1", "17.0.14+7.st.6", "17.0.14+7.st.5"] cmake : x86_64-windows ["4.2.3+st.1", "4.0.1+st.3"] cube-cmsis-scanner : x86_64-windows ["2.4.2", "2.2.1", "1.1.3", "1.1.0", "1.0.1"] cube-code-doc : all ["0.0.7+st.2", "0.0.6+st.2", "0.0.5+st.1", "0.0.3+st.1", "0.0.2+st.1"] cube-code-manifest : x86_64-windows ["1.1.3+st.1", "1.0.9+st.2", "1.0.6+st.1", "1.0.3+st.1", "1.0.1+st.1", "1.0.0+st.1"] cube-wrapper : x86_64-windows ["0.10.2", "0.8.3", "0.7.3"] gnu-gdb-for-stm32 : x86_64-windows ["14.3.1+st.2", "13.3.1+st.10", "13.3.1+st.9"] gnu-tools-for-stm32 : x86_64-windows ["14.3.1+st.2", "13.3.1+st.9", "13.3.1+st.8"] gnu-tools-for-stm32-13_3_1-d

Hi,during porting the USBX as host stack to an stm32h7 I was getting an error indication,that a semaphore was used during interrupt context (OTG_HS_IRQHandler).For my opinion, it is wrong to call the generated code out of the ISR without decoupling the context. How did you solve the problem? Is there a posibility in cubemx the generate code with decoupling the context?.

My STM32cube IDE project has a pre-build command:${ProjDirPath}\Middlewares\Third_Party\nanopb\generator\protoc --nanopb_out=${ProjDirPath}\Application\cm4_interface --proto_path=${ProjDirPath}\Application\cm4_interface ${ProjDirPath}\Application\cm4_interface\cm4-interface.protoThe json that's generated doesn't correctly escape the '\' characters, which results in an error...