STM32 MCUs Software development tools

I'm getting the "elf has a LOAD segment with RWX permissions" warning, and a quick search here reveals a couple of ways to get around this: Disable the warning, or edit the .ld file.However, in my case, I'm using the upper half of the STM32's flash area to emulate non-volatile memory.  So I want my flash to be writeable.Can anyone suggest some magic to put in my linker file that will make the warning go away, but also allow me to write to flash?Also: I'm using STM32CubeIDE, so my linker file is auto-generated.  Is there a user-override mechanism (like there is in the source code)?Thanks.

Hi, I am seeking some guidance.With the new release STM32CubeIDE for Visual Studio Code 3.8.0, it says it comes with new features including " Serial terminal: Enabling developers to easily setup serial communication for example leveraging the ST-LINK virtual com port."In the docs, there is not much explanation on how to get this working. I only see:"If the serverPort attribute is defined, two ports are used by the ST-LINK GDB server: one for the debug session and serverPort + 1 for the SWO connection.These ports are reserved even if SWO is not activated in the debug configuration."How would one activate the SWO in the launch.json? I went through all the options with completition and none seem to activate or configure the SWO.I know that with the extension "Cortex-Debug" provided by marus25 we could configure the SWO as so:"swoConfig": { "enabled": true, "cpuFrequency": 275000000, // must match -a (Hz) :contentReference[oaicite:4]{index=4} "swoFrequency"

Split from STM32CubeIDE version 2.1.0 won't generate IOC project file as this is a new question.Please keep to one question per thread.Thanks both Ghofrane GSOURI & Andrew Neil for pointers. Adopting the method shown in the presentation. I have selected a nucleo development board to create an STM32MX project. I have then created a STM32CubeIDE projecfrom the MX project. Having not written any code yet, I'm getting compilation errors but have no idea why? The errors are relating to files marked with a red x below: 

Please note that the user authentication service will be under maintenance on 12 March at 5:30 AM CET (10:00 AM IST) for approximately one hour. During this period, some disruptions may occur. The impact is limited to versions earlier than STM32CubeMX V6.16 and STM32CubeIDE V2.0.0. The service returns to normal soon after maintenance is complete. What to do if you encounter a problem If you experience issues during the maintenance window, please use st.com or try again after one hour. If the problem persists after that time, contact us through the Community for further assistance.   Update 13 March 2026: The maintenance was successfully completed as scheduled on 12 March. If you encounter any issues, please do not hesitate to contact us.

Please note that the user authentication service will be under maintenance on 12 March at 5:30 AM CET (10:00 AM IST) for approximately one hour. During this period, some disruptions may occur. The impact is limited to versions earlier than STM32CubeMX V6.16 and STM32CubeIDE V2.0.0. The service returns to normal soon after maintenance is complete. What to do if you encounter a problem If you experience issues during the maintenance window, please use st.com or try again after one hour. If the problem persists after that time, contact us through the Community for further assistance.   Update 13 March 2026: The maintenance was successfully completed as scheduled on 12 March. If you encounter any issues, please do not hesitate to contact us.

Hello,When generating a basic Bluetooth project for NUCLEO‑WBA55CG using STM32CubeMx 6.17 (and 6.16) with Cmake as the toolchain, the project compilation fails to a missing symbol during the link stage.Here is the error message:le_ctrl.c:(.text.HCI_READ_LOCAL_VERSION_INFORMATION+0x20): undefined reference to `ll_sys_get_brief_fw_version'After investigation, it turns out the issue is caused by the incorrect order of linked static BLE libraries in the generated CMake file "cmake/stm32cubemx/CMakeLists.txt". CubeMX places the Link Layer and BLE Stack libraries in an order that prevents the linker from resolving symbols correctly. Reordering the libraries fixes the issue.Here is the corrected order that resolves the error:# Project static libraries set(MX_LINK_LIBS :stm32wba_ble_stack_basic.a :WBA5_LinkLayer_BLE_Basic_lib.a STM32_Drivers ${TOOLCHAIN_LINK_LIBRARIES} Utilities STM32_WPAN Common ) Best regards

Having some issues trying to debug a FreeRTOS project using JLink, using an STM32U5G9 (Riverdi 5" Display Board) If I enable "serverRtos" in the launch configuration:"configurations": [ { "type": "jlinkgdbtarget", "request": "launch", "name": "STM32Cube: STM32 Launch JLink GDB Server", "origin": "snippet", "cwd": "${workspaceFolder}", "preBuild": "${command:st-stm32-ide-debug-launch.build}", "runEntry": "main", "serverSpeed": "12000", "serverRtos": { "enabled": true, "port": "60000", "driver": "freertos", "driverPort": "ARM_CM33_NTZ" }, "preRunCommands": [ "monitor exec SetRTTSearchRanges 0x200bb800 0x234800" ], "imagesAndSymbols": [ { "imageFileName": "${command:st-stm32-ide-debug-launch.get-projects-binary-from-context1}" } ] } ]And then try to start a debug session, i get a disconnect error:Reading 20 bytes @ address 0x200C2A5C Read 4 bytes @ address 0x200C2A28 (Data = 0x200C2970) Read 4 bytes @ address 0x200C2A58 (Data = 0x200BEA20) Read 4 bytes @ add

Hello,I want to develop a LoRaWAN sensor with STM32WL5MOCHxS, but I can't activate the LSE and HSE clock in CubeMX.Is there a way to make the adjustments in the .ioc?The configuration is possible in STM32WL5MOCH (expired).

There is a problem with saving assembler source files when the C/C++ > Editor > Save Action > Format source code option is enabled:As a result, the file is not saved, and when it is just created, there is no file at all. It's quite irritating, especially because this is quite an old bug and no one has resolved it yet.

I’ve been trying to download STM32CubeIDE from your website for the past 3 days without any luck. I’m located in Norway. I recently updated my old installation (version 1.4.x, not sure exactly which), and something went wrong during the update. Now the IDE is broken and won’t start, and I don’t have the original installer anymore. The problem is that the download from the website simply never starts. After I accept the license and press download, nothing happens. I’ve tried: Different browsers Clearing cookies/cache Incognito mode Using a VPN Different networks Still no success. Is there an alternative way to get the installer, or could this be some kind of regional/server issue? Any help would be appreciated.

Hello ST Community,I am reporting a 100% reproducible build failure when using the latest STM32CubeWBA SDK and tools for the NUCLEO-WBA55CG. It appears the default configuration generated by STM32CubeMX for the BLE_p2pServerThreadX application results in a RAM overflow and linker warnings.Environment:MCU: STM32WBA55CGUxBoard: NUCLEO-WBA55CGSDK: STM32Cube_FW_WBA_V1.9.0STM32CubeMX: v6.17.0STM32CubeIDE: v2.1.0 (with GNU Tools for STM32 14.3.rel1)Steps to Reproduce:Open the example .ioc file located at: STM32CubeWBA\Projects\NUCLEO-WBA55CG\Applications\BLE\BLE_p2pServerThreadX\BLE_p2pServerThreadX.iocIn STM32CubeMX, generate the project for STM32CubeIDE.Open the project in STM32CubeIDE v2.1.0 and perform a Clean Build.Observed Error (Scenario A - Default settings):The linker fails with a RAM overflow of 17,288 bytes:ld.exe: BLE_p2pServerThreadX.elf section `.bss' will not fit in region `RAM'ld.exe: region `RAM' overflowed by 17288 bytes Observation (Scenario B - Manually adjusting RAM

Hi ST-Team,context:- STM32H753ZI NUCLEO Board- VSCode with STM32CubeIDE Extension- Clang Compilerafter follow updatesSTM32CubeIDE VSCode from v3.7.0 to v3.8.0STM32CubeMx from v6.16.1 to v6.17.0incl. MCU Package H7 from v1.12.1 to v1.13.0incl. Azure RTOS for H7 from v3.4.0 to v3.5.0we get now following warning if a file is including the header\Drivers\CMSIS\Device\ST\STM32H7xx\Include\system_stm32h7xx.h[build] [6/206] Building C object CMakeFiles/STM32_NUCLEO-H753ZI.dir/AZURE_RTOS/App/app_azure_rtos.c.obj [build] In file included from D:/dev/Prj/Clean_STM32H7_Project__02/AZURE_RTOS/App/app_azure_rtos.c:28: [build] In file included from D:/dev/Prj/Clean_STM32H7_Project__02/cmake/stm32cubemx/../../Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h7xx.h:124: [build] In file included from D:/dev/Prj/Clean_STM32H7_Project__02/cmake/stm32cubemx/../../Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h753xx.h:232: [build] D:/dev/Prj/Clean_STM32H7_Project__02/cmake/stm32cubemx/../../Drivers/CMSIS/De

 stm32cubeIDE for Vscode ，there is no one-click download function. How to add? 

Hello all,I can't download the STM32CubeIDE even as I am registered. There seems to be somthing broken with the Web page. I have tried several browsers. This is what I get, so there is no download button and the table is garbled:Any help appreciated.Johannes 

HiWhile running stm32CubeIDE 2.0.0 (and older versions), the the RTOS kernel aware debugging worked as expected (described here for thoose who dont use it):  https://community.st.com/t5/stm32-mcus/how-to-enable-freertos-run-time-and-stack-usage-view/ta-p/627524However, since updating to 2.1.0 this seems to have stopped working.I have tried the #define configTASK_RETURN_ADDRESS NULL as suggested herehttps://community.st.com/t5/stm32cubeide-mcus/freertos-backtrace-problem/td-p/858548But without any change. I have tested GCC 12.3, 13.3 and 14.3 with no changeThe "FreeRTOS Queues", "FreeRTOS Task list" and "FreeRTOS Semaphores" views still works as expected.What can I do to remedy this? Best regardsMartin 

Dear all and ST Tech Support,I am writing to report a concerning inconsistency I encountered while migrating an older project to the latest version of STM32CubeMX (v6.17.0).Background: I recently reopened a project originally created about two years ago with STM32CubeMX v6.8.1 for the STM32H742VGTx MCU. My goal was to review the Timer 4 settings to use them as a reference for a new design.The Issue: Upon inspecting the Clock Configuration tab, I noticed that the APB1 Timer Clock was displayed as 120 MHz. Based on my original project notes, this value should have been 240 MHz.When I calculated the Timer 4 period using the 120 MHz figure, the resulting timing was twice as slow as it should be. While checking the documentation, I confirmed that Timer 4 is connected to the APB1 bus. In the CubeMX interface:The D2PPRE1 divider was set to /2, resulting in an bus clock of 120 MHz (which is the limit).However, the Timer Multiplier was stuck at x1, leading to an APB1 Timer Clock of 120 MHz.Obse

We are working on a project that uses MbedTLS v4.0.0, which contains some ASM code, and when we try to compile the project with gnu-tools-for-stm32 14.3.1+st.2, the compilation fails with the following error:[build] FAILED: [code=1] Middlewares/Third_Party/mbedtls/tf-psa-crypto/drivers/builtin/CMakeFiles/builtin.dir/src/bignum_core.c.obj [build] C:\Users\Parminder\AppData\Local\stm32cube\bundles\gnu-tools-for-stm32\14.3.1+st.2\bin\arm-none-eabi-gcc.exe -DDEBUG -DESC_TRL_REMOVE_DBG -DESC_USER_BUILD_CONFIG_CUSTOM=SC_vendor_platform.h -DSTM32L475xx -DTF_PSA_CRYPTO_CONFIG_FILE=\"C:/smartconnect-h300/H300/mbedtls_porting/crypto_config.h\" -DUSE_HAL_DRIVER -IC:/smartconnect-h300/Middlewares/Third_Party/mbedtls/tf-psa-crypto/drivers/builtin/src -IC:/smartconnect-h300/Middlewares/Third_Party/mbedtls/tf-psa-crypto/drivers/builtin/include -IC:/smartconnect-h300/Middlewares/Third_Party/mbedtls/tf-psa-crypto/include -IC:/smartconnect-h300/Middlewares/Third_Party/mbedtls/tf-psa-crypto/core -I

Unable to get stm32 project option in my stm32 CubeIDE software

Hello,I am working on using NRST pin in stm32g031j6m6 as GPIO, but it fails every time. I've changed many option bytes and even options present only on stm32g0x1 have workwd on my chip, except of NRST_MODE. If i want to change this option to 2 (gpio mode) and try to apply, the progress bar stays at 0% endlessly until i quit the STM32CubeProgrammer. I didn't have any problems with communication between nucleo and stm32g031. I tried to program my chip with st links built in nucleo u031 and f303, everytime without success. What else can i try? 

Hi All,I have been struggling with the CUBEMX (6.17.0). I just want to put here the facts. I am deeply disappointed about the support, but let's suppose it's minor and will be corrected no later than next week.I wanted check and understand the LCD settings with touchGFX since the newest version(4.26) of both did not worked together either. If I tick in the separate c and h files the cubemx generates the wrong files. Also the cubemx will not generate all of the files to build the setup. There are two files between the touchgfx and cubemx in the touchgfx library. Note: The older files from the s7 development board has the comments that it will be generated but just part of it. Note2: I bought the dev board for sure and identified these errors there. It's even bigger error in the STM32H7x7 LQFP176 since the XSPI1 and XSPI2 are available at HEXA_SPI, but it's the same behaviour as above. The right MCU cannot be selected. See the datasheet for the ordering number. It has to have H to g

On STM32Hxx and STM32N6 families I have faced a situation where I need to modify startup assembly code  (startup_stm32xxx.s) to copy code (.text) into ITCM or clear RAM/TCM areas, for clean data or to prevent ECC error (on STM32N6). But next time CubeMX generates code, those changes are overwritten. Same story with SystemInit function in system_stm32xxx.c. So either manual restoration or script must be done. But it's getting quite annoying after several projects. I believe the purpose of CubeMX is to ease development, so I make a feature request:Please add user code begin/end comment sections that exist in main.c also into startup_stm32xxx.s assembly and system_stm32xxx.c source files.For startup assembly I wish the user sections are:User symbols definitions.User data copy.User zero fill.For system file I wish the user sections are quite similar to main.c:User includes.User defines/constants/variables.In SystemInit() function:In the beginning.After VTOR settingAt the end.User func

Hi folks,Well, as the title says, I am having issues installing CubeMX on my M4 Macbook Pro (Apple silicon). I got the email for both the IDE and MX, and I was able to install the IDE just fine, but the link I got for MX seems broken. Is there any other way to download CubeMX? Any help is much appreciated.

Hi all,I'm unable to install Cube IDE under W10.I tried to play with permissions/administrator/... I always get an error:NSIS error : Error launching installer.All other items (CubeMX, Programmer, Monitor ) were installed without any problem.Thanks for help.

 Hi everyone,I’ve successfully created and imported a CMake-based project for the STM32F777NIH in STM32CubeIDE 2.0.0. The project builds and compiles without any issues.However, the IDE cannot properly resolve headers, some macros, variables, and some struct definitions. To fix this, I enabled:set(CMAKE_EXPORT_COMPILE_COMMANDS TRUE)in my top-level CMakeLists.txt, which correctly generates a compile_commands.json.In CubeIDE, I also enabled C/C++ General → Preprocessor Include Paths, Macros etc. → Providers → Compilation Database Parser, and pointed it to the generated compile_commands.json (AN5952).But CubeIDE shows:Invalid build parserAnd the error log contains:“Compilation database parser does not have a build command parser configured.”So it seems CubeIDE refuses to use the compilation database to resolve include paths, even though the file exists and is valid.Is there any known workaround to allow STM32CubeIDE to consume compile_commands.json for indexing?Or any other reliable

Hello Team,  Since SCB and other core registers are not included in the SVD file for STM32H5, could you please advise on the best way to access or monitor SCB registers (e.g., VTOR, AIRCR, ICSR) during debugging in VS Code with PlatformIO? Specifically, I'm looking for guidance on: How to inspect SCB register values during a debug session (e.g., trap cause, exception entry). Recommended approach to capture trap/exception information like: HardFault status (HFSR) Configurable Fault Status (CFSR) Bus Fault (BFAR) MemManage Fault (MMFAR) Any suggestions for manual mapping or watch expressions in the debugger that would allow me to monitor these registers, since they’re not shown in the peripheral view. Any tips or best practices for bare-metal Cortex-M33 debugging without full SVD support would be greatly appreciated. Best regards,Manikanta