STM32CubeProgrammer (MCUs)

Before this all work fine until suddenly the file cannot be open. Tried to uninstall and delete all related file form pc then install back. Tried also to download the new and old version. The result in the same for both, still cannot open file. Can someone help me with this?

I would like to choose one page like in STM32 ST-LINK Utility: 

STM32CubeProgrammer v2.10.0 release information New features • Added the updater tool for automatic software updates. The updater allows the users to make automatic updates of the software and its associated packages. It is available in all supported operating systems: Windows®, Linux®, and macOS®. • Added the support for OpenBootloader via UART for the STM32U5 Series. • Added the possibility to unlock the STM32WL dual-core microcontrollers after a wrong option byte programming through a new button in the GUI or a command in the CLI. • Added the support for the STM32U59x/5Ax microcontrollers. • Added the SFI, SMI, and SFIx integrity check for the STM32H73xxx microcontrollers. Fixed issues 82999 [STM32WB Series] Make feature, RF Stack type, and version visible on GUI. 83752 Inconsistent use of bin option for STM32MP1 microprocessors. 97890 Integrate the modified MT25TL01G_STM32H750B-DISCO.stldr. 102454 Add spent time information for option byte configuration in log file. 103609 [Signing

Hi,We would like to use the STM32CubeProgrammer API to connect to multiple targets in parallel and program OTP, flash, option bytes etc. Each ST-Link is handled by a separate process.The problem is, that after connecting in direct (non-shared) mode to the 1st ST-Link, the 2nd process is unable to list the rest of them, the getStLinkList function returns with 0.If the shared mode is enabled, then the 2nd process can only see the ST-Link that is already used by the 1st process.Is this a limitation of the library, or are we doing something wrong?

I just set up a new laptop and installed the Cube Programmer but I keep getting the error: CubeProgrammer_API or one of it's dependencies is missing. Please try reinstalling the program or check your java architecture.I am running Windows 10 64-bitI installed 2.10.0 (SetupSTM32CubeProgrammer_win64)I can run it in admin mode to get it to work, but when I do that it can't see the network shares that I have mapped. Since we keep all of our 'master' images on a network share, that's kind of important for me. Besides, "running as admin" feels like a hack anyways. If it needs to run as admin, it should pop up with a message saying to please restart in admin mode. If it doesn't need to run in admin, why can't it find the java files?

Posted on January 22, 2018 at 19:51I'm running Mac OSX 10.9.5I installed STM32CubeMX.app without problem and it runs fine.However, when trying to install STM32CubeProgrammer.app it hangs at step 6 of the install program. Running the installer from the command line showed that the installer encountered this error:Exception in thread 'IzPack - Unpacker thread' java.lang.ClassCastException: java.base/jdk.internal.loader.ClassLoaders$AppClassLoader cannot be cast to java.base/java.net.URLClassLoader at com.izforge.izpack.installer.unpacker.UnpackerBase.logIntro(UnpackerBase.java:253) at com.izforge.izpack.installer.unpacker.UnpackerBase.unpack(UnpackerBase.java:285) at com.izforge.izpack.installer.unpacker.UnpackerBase.run(UnpackerBase.java:242) at java.base/java.lang.Thread.run(Thread.java:844)Any workaround for this?#installer #mac-osx #stm32cubeprogrammer

I am using CubProgrammer (version 2.4.0) to update the flash on NUCLEO-G070 board.When I select the device target i/f as ST-Link and connect, I can do flash programming.When I select the target i/f is UART, the Com Port shows up correctly about this device. However, I couldn’t connect. The error message is: Serial Port COM4 is successfully opened.17:48:09 : Port configuration: parity = even, baudrate = 115200, data-bit = 8, stop-bit = 1.0, flow-control = off17:48:10 : Timeout error occured while waiting for acknowledgement.17:48:10 : Timeout error occured while waiting for acknowledgement.Error: Activating device: KO. Please, verify the boot mode configuration and check the serial port configuration. Reset your device then try again... Do I need to put the STM32G07 Boot0 pin LOW? What am I missing? Another question: Is the Flasher-STM32 a subset of the CubProgrammer? It can only do flash programming with target device i/f is UART? 

..

Is it possible to display the data from the ITM over the SWV viewer (NUCLEO-F401RE) in STM32CubeProgrammer in HEX? ITM_SendChar could be used to send just a 32-bit code, which takes far less CPU time than a printf-style debug output?

Virgin STM32L4 always shows "Mass erase operation failed. Pleaes verify flash protection" error in STM32CubeProg. It is a virgin device, I guess as factory setting there should be no write protection. How could I flash it at all?Thank you very much!

Hello,I cannot use the STM32CUBEprogrammer standalone program, however my programmer works just fine with stm32CUBEIDE V1.7. During programming in STM32cubeide the configuration is visible and it loads STM32cubeprogrammer V2.8 I copied the settings over to the standalone program since those seem to work in STM32CUBEIDE but it still does not work. I updated to the latest firmware and tried out both V2.9 and V2.8 of STM32CUBEprogrammer but neither works. My settings: (from cubeide same settings used in cubeprogrammer)ST-LINK SN : 6ST-LINK FW : V2J39S7Board    : --Voltage   : 3.33VSWD freq  : 4000 KHzConnect mode: Under ResetReset mode : Hardware resetDevice ID  : 0x447Revision ID : Rev ZDevice name : STM32L07x/L08x/L010Flash size : 128 KBytesDevice type : MCUDevice CPU : Cortex-M0+BL Version : 0x__I am using an ST-link compatible probe not an official one at the moment. The official one however does work

Hello,I am using the STM32CubeProgrammer, version 2.10.0, and it does not detect the STM32L152VD-X reserved memory space, at address 0x0803000.The STM32CubeProgrammer detects the correct device ID which is 0x437 but does not detect the correct device.If I open the STM32_Prog_DB_0x437.xml file I see that the STM32L152VD-X is not even implemented.This allows me to write to this reserved memory space which I believe is not a good ideaQuestions:Is the STM32L152VD-X implemented in the STM32CubeProgrammer?What is the impact of writing to the reserved memory space?

In the introduce page of STM32CubeProgrammer, it descrips that this software support CAN bootloader interface, but I just find the ST-link Uart and USB. How can I configure it to CAN?

The method is as follows:1. First, set the flash option byte to force boot from the main flash.2. Set the read protection level to level 1.After this setting, the st-link tool will no longer be able to connect to the chip, which is equivalent to losing the swd pin, which is the same as setting the protection level to level 2. Because the program needs to be downloaded to the chip again, it cannot be connected to the chip, which means This chip is about to be scrapped. May I ask you guys, is there any way to restore the read protection level to level 0? thank you for your help

Hi all,The goal is to embed option bytes in hexfile, such that when production are doing their thing, the correct settings are automagically selected.But stm32cubeprogrammer fails with:Error: Data mismatch found at address 0x1FFF781B (byte = 0x00 instead of 0xFF)(the older st-link utility also fails at the same address, with a similarly-worded error)This is an STM32L422RB, and the reference manual says:USER_OPT: 0xFFEF F8AAPCROP start: 0xFFFF FFFFPCROP end: 0xFFFF 0000WRP A: 0xFF00 FFFFWRP B: 0xFF00 FFFFreading back the device memory after programming these values, all is well apart from both WRP fields, which read back as 0x0000FFFF, and thus verification failsWhat gives? Is the reference manual wrong? Is embedding option bytes no longer the recommended way?I'm loathe to skip verification, and I have no control over what tools our customer will be using in production.Any suggestions appreciated!

We are working on our own firmware update utility, and need a way to get the Device Id from default USB DFU bootloader in order to avoid wrong firmware flashing. On CubeProgrammer, we can see that info: 21:36:20 : Device ID  : 0x0423The question is: What command can be used to send to the USB DFU to get such information?I've tried reading out 0xE0042000 with DN_UPLOAD command but it returns Status(10).Thank you.

When we program the any stm32 mcu, we can choice between erase the memory or no in STM32CubeProgrammer. Why in code time we can't write in flash without erasing the memory?

Hi,I tried to install STM32CubeProgrammer v2.10.0 on my Kubuntu 20.04.4.The error I get is CubeProgrammer_API or one of its dependencies is missing.What I could find from the forum is that could mean the installer used a different Java/OpenJDK version that what the programmer tries to run on. (https://community.st.com/s/question/0D53W0000057GXWSA2/error-cubeprogrammerapi-or-one-of-its-dependencies-is-missing-with-programmer-version-240)The output from the installer looks like it installed with 1.8.0_265$ ./SetupSTM32CubeProgrammer-2.10.0.linux ./SetupSTM32CubeProgrammer-2.10.0.linux /home/arno/Downloads chdir /home/arno/Downloads/. current dir /home/arno/Downloads Command line arguments: ==================== Installation started Framework: 1.8.0_192-BellSoft-b03 (Oracle Corporation) Platform: ubuntu_linux,version=5.13.0-40-generic,arch=x64,symbolicName=null,javaVersion=1.8.0_265 Installation finished [ Writing the uninstaller data ... ]However, the official repositories show only 8u252

I cannot install properly stm32cubeprogrammer after installation step 6 it is not installing even if I use an individual laptop. So I could not be able to over the stm32cubeprogrammer. I didn't find a topic about installation problems for stm32cubeprogrammer especially.I need help for installation if it is the one solution to disable core M4 boot ! Any help would be helpful.Thanks in advance.

I'm running Ubuntu 21.04 and have set the env variable to force use of X11:GDK_BACKEND=x11The utility runs and can discover connected ST-Link devices, but when I click connect button the tool crashes in the connectStLink function:# A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007f2873aa90a3, pid=64882, tid=0x00007f2862a73640 # # JRE version: OpenJDK Runtime Environment (8.0_265-b01) (build 1.8.0_265-b01) # Java VM: OpenJDK 64-Bit Server VM (25.265-b01 mixed mode linux-amd64 compressed oops) # Problematic frame: # C [libCubeProgrammer_API.so+0x500a3] connectStLink+0x293

..

When running the program STM32CubeProgrammer, an error message appears, saying:"CubeProgrammer_API or one of its dependencies is missing. Please try reinstalling the program of check your java architecture". However I have the lastest JAVA SE Run Time installed.Any idea?OS: Windows 10 64-bitJava:java version "10.0.1" 2018-04-17Java(TM) SE Runtime Environment 18.3 (build 10.0.1+10)Java HotSpot(TM) 64-Bit Server VM 18.3 (build 10.0.1+10, mixed mode)STM32CubeProgrammer version:[EDITED]1.2.0

..