Product forums

Updated post to reflect permanent fix Dear STM32CubeIDE user, Further to the recent STM32CubeIDE project creation issue, we would like to inform you that a solution is now available for you. This permanent fix applies to all STM32CubeIDE versions. Issue description When creating a new STM32 project in STM32CubeIDE, the “STM32Cube” radio button may have become unresponsive, blocking the “Next” button after the product selection screen. This prevented the project creation from being completed. Permanent fix You can apply this resolution to any STM32CubeIDE version, even if you applied the temporary workaround that we recently shared with you. Open STM32CubeIDE. Refresh the database.Go to Help > STM32Cube updater > Select “Check the Target selector Device Database Updates” Restart STM32CubeIDE If you deactivated the auto refresh function previously, you may wish to reactivate it for all your STM32Cube tools. Here is how to proceed: STM32CubeIDE:Go to Window > Preferences

Dear MCSDK users, MCSDK version 6.4.0 is now available: Download It here. This version of the new Motor Control SDK 6 series (X-CUBE-MCDSK) provides mainly FOC and 6Step improvements, here are the main changes for this version: Motor Control Features: Common: Regular conversion manager (RCM) component has been modified to reduce memory footprint and to meet the requirement of synchronizing ADC conversions "regular" and "injected". 6Step: Increased 6Step firmware architecture efficiency and reduced FLASH and RAM Memory footprint Added Initial Position Detection and On-The-Fly Startup features. Added Software Current Sensing Monitoring mode supported for series STM32C0xx/F0xx/F3xx/G0xx/G4xx. FOC: New Maximum Modulation Index (MMI) computation compatible for all sensor-less or sensor algorithms. Mitigated speed overshoot during startup. Added ICS (Isolate Current Sensors) support for profiler for F3, G4, F4, F7, and L4. Added the ability to switch to/from primary to aux

When installing some StellarStudio  plugins http://*.srxstudio.org , you can meet the issue : sun.security.validator.ValidatorException: PKIX path building failed  It is typical IT Issue :face_screaming_in_fear:  in each corporate company. “"Path building" refers to the process of verifying a chain of certificates from a specific certificate up to a root CA (Certificate Authority) certificate. If this process fails, it means that the application could not construct a trusted path from the server's certificate to a root CA.”   IMPORTANT : The customer needs to install their own root certificate in JRE StellarStudio keystore Typically this keystore is at c:\StellarStudio-5.0\eclipse\jre\\lib\security\cacerts. The keytool that is used to access the keystore is typically installed with the JRE and ready to use.   Run the standard keytool to import the certificate, from c:\StellarStudio-5.0\eclipse\jre\\lib\security\cacerts. c:\StellarStudio-5.0\eclipse\jr

Dear community member, The “Analog and audio” topic is no longer supported on the ST community. The legacy content is available only by the read-only basis. If you have any requests regarding "Analog and audio”  topics, check the alternative support channels at ST: Support Home.We apologies in case of any inconvenience. ST community team

The documentation of the Board descriptions format is now available on Motor Control Boards Description Wiki page, this documentation is compatible with MCSDK versions from 6.1.2. Board Descriptions are used by the ST motor-control workbench to enable users to configure their motor-control application and produce a software project that implements it following its hardware component features.  Wiki Link A new documentation will arrive soon and will detail these features:  Current Sensing: three-shunt-raw-currents-differential-internal-opamp-with-external-gain-and-filtered-adc-intput-hwv  ICS  Phase Voltage sensing feature  Driver Protection feature  The descVersion property is equal to 4 from version 6.2.0 of the MCSDK and the "contentVersion" property is added. For questions regarding the board manager, please respond under this post.   Regards

Please go and visit our wiki pages where you can find a lot of information on our wireless product families (WB, WBA, WL) and the supported protocols: BLE, Zigbee, Thread, Matter, Lora, ... To begin your technical journey, please start from this top page: https://wiki.st.com/stm32mcu/wiki/Category:Connectivity This top page will guide you to the first steps to develop a wireless application using connectivity protocols on ST wireless microcontrollers.   For BLE protocol, please visit: https://wiki.st.com/stm32mcu/wiki/Connectivity:Introduction_to_BLE_with_STM32https://wiki.st.com/stm32mcu/wiki/Connectivity:Introduction_to_Bluetooth_LE_Audio You can find information on BLE Certification, BLE Features, BLE Mesh, BLE Audio, …   For Zigbee protocol, please visit: https://wiki.st.com/stm32mcu/wiki/Connectivity:Introduction_to_Zigbee You can find information on Zigbee certification, Zigbee Features, BLE-Zigbee concurrent mode, …   For Tread protocol, please visit: https://wiki

Dear all, The X-CUBE-MATTER Expansion Package is now available on our official website following this link  MATTER - Matter software expansion for STM32Cube - STMicroelectronics  It is a reference implementation for the demonstration of Matter on STM32. It is ready for prototyping a Matter end-device on a reference development platform. Refer to STMicroelectronics Matter wiki articles at https://wiki.st.com/stm32mcu/wiki/Connectivity:Introduction_to_Matter to get started with matter for the supported STM32 platforms. Kind regards, Ouadi

Dear all,   We are thrilled to announce that as of today, March 1st, 2024, SR5E1 device support in StellarStudio is available to the mass market !   This means that any user can effortlessly download the official StellarStudio installation package from ST.COM and add SR5E1 device support. In StellarStudio, use Help ==> Install New Software https://sr5.srxstudio.org https://common.srxstudio.org https://contrib.srxstudio.org This significant achievement has been made possible after a successful evaluation period with a selected group of customers. Now comes the time for wider usage!   Best regards. The StellarStudio Team        

Configuration NMEA command with QZSS 1.GPS $PSTMCFGCONST,2,0,0,0,0 $PSTMCFGCONST,2,0,0,2,0 1.Glonass $PSTMCFGCONST,0,2,0,0,0 $PSTMCFGCONST,0,2,0,2,0 1.Galileo $PSTMCFGCONST,0,0,2,0,0 $PSTMCFGCONST,0,0,2,2,0 1.BeiDou $PSTMCFGCONST,0,0,0,0,2 $PSTMCFGCONST,0,0,0,2,2 1.GPS & Galileo $PSTMCFGCONST,2,0,2,0,0 $PSTMCFGCONST,2,0,2,2,0 1.GPS & Glonass $PSTMCFGCONST,2,2,0,0,0 $PSTMCFGCONST,2,2,0,2,0 1.GPS & BeiDou $PSTMCFGCONST,2,0,0,0,2 $PSTMCFGCONST,2,0,0,2,2 1.Galileo & Glonass $PSTMCFGCONST,0,2,2,0,0 $PSTMCFGCONST,0,2,2,2,0 1.Galileo & BeiDou $PSTMCFGCONST,0,0,2,0,2 $PSTMCFGCONST,0,0,2,2,2 1.GPS & Galileo & Glonass $PSTMCFGCONST,2,2,2,0,0 $PSTMCFGCONST,2,2,2,2,0 1.GPS & Galileo & BeiDou $PSTMCFGCONST,2,0,2,0,2 $PSTMCFGCONST,2,0,2,2,2 2.Save on flash and 3.Reset $PSTMSAVEPAR $PSTMSRR $PSTMSAVEPAR $PSTMSRR

Thanks to our friend from About Energy is now possible to download a free high-performance model for the battery in use in our BMS kit or request an AutoDevKit compatible model for another battery type of your choice!   https://www.aboutenergy.io/stmicroelectronics-model-download  

In order to have a quick response to your forum posts, the best way to ask the question is:- Give the version of the MCSDK used. - Say if the problem concerns a tool (MC Workbench, Motor Pilot, Motor Profiler, etc...) - Provide picture of tools interface when is possible.- Attach the STWB6 file of the project or the JSON of the board when possible.Choose a label for the post ( Motor Pilot MC Workbench, etc...), you can select it to the right of where you write the message.Here is a template that you can reuse:[PN]: Part Number of the products used[VERSION]: Version of MCSDK[TOOL]: Name of tool ( Firmware, MC WB,MC PROFILER, etc..)[DETAILS]:symptom observed or request/question details[EXPECTED BEHAVIOR]:if related to performance then what is the target[HOW TO REPRODUCE]:input, output, steps But before entering a new post, please consider to first check our Motor Control documentation available via Work Bench Tool by clicking on About -> Documentations -> Documentation -> i