STM32CubeIDE (MCUs)

Dear Sir/Madam , I have imported BSP package for the stm32F429zi-disc1 board to the stm32cube ide and connected to the disc1 board over STLink Interface and then tried to start debugging ; but I could not download the executable file and I have got the following error. I have also upgraded the firmware of the STLink on the Disc1 board to the latest one. But I have got the same result. Firmware version of the board is V2J46M33 . Please help me on this issue. Remark : Please also note that I was able to download the same hex file to the board using stm32cubeprogrammer version 2.20.  Error in final launch sequence: Failed to execute MI command:load C:\\Users\\Lenovo\\STM32Cube\\Repository\\STM32Cube_FW_F4_V1.28.2\\Projects\\STM32F429I-Discovery\\Examples\\BSP\\STM32CubeIDE\\Discovery_Debug\\BSP.elf Error message from debugger back end:Error finishing flash operationFailed to execute MI command:load C:\\Users\\Lenovo\\STM32Cube\\Repository\\STM32Cube_FW_F4_V1.

Hi, Recently, im go into some AI-integrated project. With the repos ST-model-zoo-service. Im wondering about these structural template. About how to import these template(like can i create a template like that, for both nested-project and structural tree like the st-model-zoo application code) in STCubeIDE?Moreover, Can you guys gimme some related documents about the hierarchical project's template and multicore template?

I have Windows 11 running on Parallels and can't get ST-Link working. Will I be able to complete the STM32CubeIDE Basics course on a MacBook Pro (MacOS) with Apple silicon? I'm asking because the course prerequisites specifically call for a Windows PC. I've been using Nucleo-F411 and F446 boards for 3rd party training exercises with no problem.

Dear community,we are using custom binary images, that need to be flashed to our stm32 controllers for debugging. Images contain some additional information not contained in elf-file so flashing the elf is not sufficient.With JLink debug launcher we can simply do this:But with ST-Link (both STLink GDB server and OpenOCD) this is not allowed.So I wanted to load the binary via an additional entry in "Load Image and Symbols" (which effectively calls STM32CubeProgrammer for flashing):But with that I am facing another issue: I need to reduce SWD frequency to 3.3MHz or even 1MHz, otherwise the flashing does not work:Error: Unable to get core IDError: No STM32 target found! If your product embeds Debug Authentication, please perform a discovery using Debug Authentication2nd connect tentative with frequency (8MHz)Error: Unable to get core IDError: No STM32 target found! If your product embeds Debug Authentication, please perform a discovery using Debug AuthenticationI am not able to reduce swd

Had the same issue, pins get lost when exporting with CubeIDE. I opened the exportet symbol file and they are not there, so it must be a CubeIDE or UltraLibrarian error. However, the STM32 MCU I wanted to use is also in the standard KiCad Library "MCU_ST_STM32F1", so I just used this one. Although it is more time consuming, you can consider labeling the nets or adding comments according to the pin names of your CubeIDE project. Edit: moved from the old thread Pin naming export (to have more chance for answer).

When I try to log into myST from the IDE, it literally does nothing. I click on the button, but no window pops up, nothing happens in the browser, nothing happens in the IDE, no new windows are created. I don't even get any output on the CLI (if I start the IDE from the CLI). What is going on here? This is my version

I use STM32CubeIDE version 1.14.1. When I'm in debug mode, the Values in the "Live Expressions" window are weird and wrong.However, I found out that after editing and putting a random value in one of the fields, it will be fixed.Beginning:  After writing a number:

Hi! I wish you are doing great!My problem is, I'm working on nucleo-f439zi board, in the reference manual, in register Flash-OPTCR, bit 4 is BFB2.But, when I choose the correct board (Nucleo-F439ZI), and go to debug mode, then SFRs, I only find F429 registers, no F439!In another words, if I'm correct, there's no SVD for the nucleo-f439 on STM32CubeIDE v1.11.A picture is attached, sorry for the low quality.Thank you in advance.

Dear TeamI am currently working on a BLE Mesh implementation. I have added the libraries in the project settings, but I am still getting errors. Please kindly respond.Description Resource Path Location Typecannot find -llibBlueNRG_Mesh_CM4-BNRG2A1_wc32_ot.a: No such file or directory ble_mesh_application C/C++ Problemcannot find -llibSTM32CryptographicV3.0.0_CM4_GCC.a: No such file or directory ble_mesh_application C/C++ Problemmake: *** [makefile:76: ble_mesh_application.elf] Error 1 ble_mesh_application C/C++ ProblemLighting-STM32_BNRG2A1.elf has a LOAD segment with RWX permissions Lighting-STM32_BNRG2A1 C/C++ ProblemProject 'Lighting-STM32_BNRG2A1' has no explicit encoding set Lighting-STM32_BNRG2A1 /Lighting-STM32_BNRG2A1 No explicit project encoding

Hello, I'm trying to set the debug configuration of my project, but I cannot open the debug file under C/C++ Application. Besides, running this project was not successful either.I have tried switching workspace and uninstalling IDE, but neither worked.Can anyone help me solve my problem? Thank you very much.

Hallo, I'm facing with a problem of IDE v.1.18.1 crash starting from early today (OS Windows 11).This version has been being used al least 3-4 months , and even yesterday everything worked fine.Once I try to open IDE, it pretends to look for some updates and crashes almost immediately.There are no spaces in paths; I didn't make any changes at all.Does anyone has a clue, what could go wrong?I still can run IDE 1.12.1, but i cannot update it to ver. 1.18.1.      

stm 32 nucleo -G071RB , TARGET NOT RESPONDING I am not able to run after dumping the code once i use the run commond after dumping i am getting  arget is not responding, retrying... Target is not responding, retrying... Shutting down... Target is not responding, retrying... Target is not responding, retrying... Target is not responding, retrying... Target is not responding, retrying... Target is not responding, retrying... Target is not responding, retrying... Target is not responding, retrying... Target is not responding, retrying... Target is not responding, retrying... I tried changing the USB,Workspace,and opened new project still having same issue. I am using STM32 Cube ide version 1.12.0 and this issue same in the other latest version 1.19.0 and firmware package is STM32Cube FW_GO V1.6.2

I am using a STM32H745, STLINK-V3SET probe, and STM32CubeIDE.I have noticed that when I connect the debugger to the running core the core gets paused for ~2.5 seconds.Is there a way to connect the debugger to a running core without it pausing?Settings:Download=false,Verify flash download : Not checkedReset Behaviour=NoneSet breakpoint at : Not checked

I upgraded STM32CubeIDE to version 1.14.1 today and can no longer connect with my target.  The process  of updating CubeIDE also updated my STLink-V3PWR debugger to V3PWR V4.J3.B1.P4.  Now, programs that downloaded and ran just fine yesterday won't download with the "Target no device found" error.  The STMCubeMonitor-Power (version 1.2.1) software can take control, power on the target, get the temperature, reset my target board and can run the ULP Bench Test and report a ULPMark Score.  That leads me to believe STMCubeMonitor-Power can download and run a program and my target board is still working. I don't have any other target boards available to try right now.STM32CubeProgrammer gives a "Error: No STM32 target found!" I'd appreciate any suggestions about how to fix this issue before I try rolling back the firmware on the debugger.Here's the error I get in the CubeIDE Console windowSTMicroelectronics ST-LINK GDB server. Version 7.5.0Copyright (c) 20

I am trying to configure B-L072Z-LRWAN1 using STM32CubeIDE. According to my research, I need to download and use the End_Node project from the STMicro website, but when I try to do so, I get the following error."The selection cannot be launched, and there are no recent launches"I followed the instructions on the following website. Do you know how to solve this problem?https://docs.antares.id/en/code-and-library-examples/stm32-lora-stm32cube-ide/sending-simple-data-to-antares

I work in a workspace but I use vim with clangd for editing my code. I am wondering if it is possible to create a compile_commands.json file and if so how. If the IDE uses cmake under the hood then it should be rather straightforward but I cannot understand how to proceed. see e.g. this:https://cmake.org/cmake/help/latest/variable/CMAKE_EXPORT_COMPILE_COMMANDS.html 

Hello，         After I use STM32CUBEIDE's built-in STM32CUBEMX to generate code, the source files and header files under the folder I created myself disappeared, how can this be solved?        Before I use STM32CUBEIDE's built-in STM32CUBEMX to generate code：      After I use STM32CUBEIDE's built-in STM32CUBEMX to generate code,all the files I created disappeared.     The compilation path of the file I created has already been saved, and I also checked the keep user code when re-generating option 

I spent the time to learn how to get it up and running so that you don't have to. What I am explaining here was done on Win 10. My CubeIDE version was 1.6.1.Downloading and copying the files:At the time I installed it, STM32Cube_FW_H7_V1.9.0 was current. I downloaded it from here.After extracting the zip file, open a File Explorer window and go to the directory "<extractedFiles>\en.stm32cubeh7_v1-9-0_v1.9.0\STM32Cube_FW_H7_V1.9.0\Drivers\CMSIS\DSP"In the above directory, you will notice two folders: "Include" and "Lib". These two folders will have to be copied in your already existing project as explained next.Open another File Explorer window and go to the root directory of your project "<user>\STM32CubeIDE\<workspace>\<projectName>\Drivers\CMSIS". Here you need to create a new folder called "DSP". Once created, copy the to folders "Include" and "Lib" under folder "DSP".Unless your CubeIDE is already open, start it up. Unless the DSP folder isn't already visibl

Dear all, I am using Nucleo-F446RE and also Nucleo-F103RB.As you may know precise clock testing require for some application.For testing purpose always change RCC as Bypass HSE clock from STLINK on this case.Recently I have used Nucleo-F446RE as above but behavior is different as failure on startup.I have tried simple test on both Nucleo-F103RB and Nucleo-F446RE.F103RB's result is correct. Bypass clock is worked.I had reflashed STLINK side as latest build on both unit.So STLINK side has no delta. Using environment CubeIDE 1.19.0 with included CubeMX.Now I am looking F446RE SystemClock_Config in detail.   

Running STM32CubeIDE versions 1.18.1 and 1.19.0istatic char *Audio3D[] = { // Main Settings display"THERE ARE 15 VOLUME ",IDE version 1.18.1 displays a 21 character line of code with the quotes one ontop of the other.static char *Temp2D[] = { " TEMPERATURE "," CELSIUS "," FAHRENHEIT "}; IDE version 1.19.0 displays a 21 character line of code with the quotes not lined upMakes it extremely hard to see if hundreds of lines of code are all 21 characters.static char *Temp2D[] = {" TEMPERATURE "," CELSIUS "," FAHRENHEIT "}; 

Hello, I am using the SWV viewer successfully to output messages from the microcontroller at runtime. This is a nice tool and usually it works fine.  When I run an application for a longer time (e.g. over night) I get this errorI did consider the trace buffer as a buffer like outputting to a UART. What is happening there?regards Alexander 

Hi all,I keep running into a circular include problem in STM32 CubeMX projects:main.h is auto-generated and contains pins and peripheral handles.main.c must include main.h (CubeMX forces it).User modules (i2c_user, adc_user, etc.) need access to pins/handles, but including main.h in them causes circular dependencies.Workarounds I’ve tried:Creating a board.h wrapper — but CubeMX regenerates main.h, so it requires constant manual updates.Passing handles/pins as function arguments — clean but cumbersome.Including user modules only in main.c — works, but feels messy and unclear.  My question: How do you handle this in real-world CubeMX projects? Is there a clean pattern that survives main.h regeneration and avoids circular includes? Sorry if this is not the perfect section of the forum, but I believe this topic is quite relevant due to the challenging architecture of the generator.Thanks!

Hi everyone,STM32CubeIDE v 1.19.0MCU: stm32h755I am debugging correctly the dueal core by means i see all registers in the live expression changing values without my intervention as expected by the simple code i wrote. As soon as i input a value, let's say I change the value of a variable from 0 to 1, then the panel shows:I used to work with the 1.13.2 version and older fw package and never had this issue, with the very same MCU, but with the new fw package and new IDE this is what i get.I must say that to make it work in the first place I had to force the gcc toolchain using the command "gcc -gdwarf-4" in project settings. There is for sure a link but i can't get the hang of it.Thanks in advance to all. For the sake of understanding, i setup the debug config as explained in stm AN:https://www.st.com/resource/en/application_note/dm00629855-getting-started-with-projects-based-on-dualcore-stm32h7-microcontrollers-in-stm32cubeide-stmicroelectronics.pdf

Hi all,I recently updgraded to STM32CUBEIDE 1.19 and GDB stopped working.The error is  I'm a Linux illiterate, and most to the posts seem to be Linux centrix.Any help is greatly appreciated!Thanks, Archer

Hi all,Whenever I try to create a new project for the NUCLEO-H7S3L8 board with the Project Structure set to Application only, I get the following error. I’ve already refreshed updates via Help → STM32Cube Updates and confirmed that my firmware repository contains the latest STM32CubeH7RS package.The project creation works only if I select Boot along with Application in the project structure. A standalone Application configuration always fails.Has anyone else encountered this? Is there a workaround to create an Application-only project for this board?