Automotive and Transportation

First time building a sample project after installation of SPC5Studio 6.0 + autodevkit + MCTK_LIB and got this:22:10:13 **** Incremental Build of configuration Default for project SPC560Pxx_RLA AEK_MOT_3P99081_3Phase_Motor_Control_via_CAN ****make all Cannot run program "make": Launching failedError: Program "make" not found in PATHPATH=[C:/SPC5Studio-6.0/eclipse/jre/bin/server;C:/SPC5Studio-6.0/eclipse/jre/bin; ...

I cannot install this dark theme on SPC5Studio 6.0. Below is the error. Is there any dark theme I could install?Cannot complete the install because one or more required items could not be found. Software being installed: DevStyle (includes Darkest Dark Theme) 1.11.0.202105260439 (com.genuitec.eclipse.theming.core.feature.feature.group 1.11.0.202105260439) Missing requirement: Webclipse UDM 13.0.0.202105260439 (com.genuitec.eclipse.monitor 13.0.0.202105260439) requires 'java.package; org.apache.commons.lang3 3.1.0' but it could not be found Cannot satisfy dependency:  From: EditorMinimap 1.11.0.202105260439 (com.genuitec.eclipse.inlinesearch 1.11.0.202105260439)  To: osgi.bundle; com.genuitec.eclipse.monitor 0.0.0 Cannot satisfy dependency:  From: DevStyle (includes Darkest Dark Theme) 1.11.0.202105260439 (com.genuitec.eclipse.theming.core.feature.feature.group 1.11.0.202105260439)  To: org.eclipse.equinox.p2.iu; com.genuitec.e

..

I am trying to use the example created by the SPC5 studio with interrupts. It has a PIT_0 (vector 227) configured. What i observed is that the interrupt is triggered only once after the application starts and is not triggered any more. As far as I understand from the datasheet, the respective interrupt register bit is to be reset by writing 1 to it and then the interrupt is cleared and ready to be retriggered. On the same lines I also configured the STM interrupt but it has the same behaviour. After the application starts interrupt is triggered once and not anymore. Could someone please help and let me know what are all the necessary steps in initialisation and while clearing the interrupt so that the ISR is triggered everytime the timer has met its criteria.Kind regards,Fahad

Now in AutoDevKit Ecosystem

An error occurred while collecting items to be installedsession context was:(profile=DefaultProfile, phase=org.eclipse.equinox.internal.p2.engine.phases.Collect, operand=, action=).No repository found containing: osgi.bundle,com.st.spc5.components.L9908.spc5xx_rla,1.0.0.202010121447No repository found containing: osgi.bundle,com.st.spc5.components.l9907.spc56xx_rla,1.0.0.202010121447No repository found containing: osgi.bundle,com.st.spc5.components.l99asc03.spc56xx_rla,1.0.0.202010121447No repository found containing: osgi.bundle,com.st.spc5.components.motorcontrol.demos.spc56xx,1.0.0.202010121447No repository found containing: osgi.bundle,com.st.spc5.components.motorcontrol.spc56xx,1.0.0.202010121447No repository found containing: org.eclipse.update.feature,com.st.spc5.components.spc5rla.spc56xx.motorcontrol.feature,3.0.0.202010121447No repository found containing: osgi.bundle,com.st.spc5.components.stgap1s.spc56xx_rla,1.0.0.202010121447

I have used the default test bare-metal application for the testing the can in SPC5 studio stopped the loopback, swap the RX ID filters in the configurator, and tried to send using one can subsystem and receive by the  other but it keeps stuck in this for loop ( if (return value != CAN_MSG_OK){ for ( ; ; ) {}; )}please let me know how to fix this or if there is a step or another way to follow other than using this bare-metal application.screenshot of the configurations are attached---------------------------------------------------------------------------------------------------------------------------------------This is the code:-----------------------/****************************************************************************** Copyright © 2015-2019 STMicroelectronics - All Rights Reserved** License terms: STMicroelectronics Proprietary in accordance with licensing* terms SLA0089 at www.st.com.* * THIS SOFTWARE IS DISTRIBUTED "AS IS," AND ALL WARRANTIES ARE DISCLAIMED,&nbs

Hi,I am trying to test the COLD START behaviour of the X-NUCLEO-XGNSS1A1 and when trying to start the Autonomous mode I get the following response:Running Autonomous AGPS taskRinex files directory is D:\RINEXStart downloading file ftp://cddis.gsfc.nasa.gov/pub/gps/data/campaign/mgex/daily/rinex3/2021/brdm/brdm3010.21p.ZOperation cancelledSystem.Net.WebException: The request was aborted: The request was canceled.  at System.Net.FtpWebRequest.EndGetResponse(IAsyncResult asyncResult)  at System.Net.WebClient.GetWebResponse(WebRequest request, IAsyncResult result)  at System.Net.WebClient.DownloadBitsResponseCallback(IAsyncResult result)--- End of stack trace from previous location where exception was thrown ---  at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)  at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)  at STGps.TWebReq.<StartTaskDownloadFileAs

Hi. I'm trying to send a message to a non-existing slave via I2C on SPC58EE84E7.Is this possible?I get a NACK error message in response. Are there any examples of such an implementation?Thank you!

Hello! I'm new to SPC5 studio. I just downloaded and installed the software. when I try to launch it, nothing happens. my laptop: Lenovo Ideapad 320, i5 7th gen, 8gb ram, Windows10what I tried:-I tried launching in compatibility mode(windows 7,vista)-Restarted my Laptop-Tried complete reinstall-Tried downloading again and reinstallingNone of the above solved the issue, the thing is I don't even see any error messages. It just doesn't launches. Any help would be great. Thanks in advance

Hi,I am developing an application on SPC58EC that uses the serial with DMA for reading.I'd like to know if there is a way to know and get the position where it's writing in the buffer. I mean something like the corresponding "__HAL_DMA_GET_COUNTER(...)" or to the "...->CNDTR" register of the STM32.I already use the receive callback that trigger at the end, but it's not enough for my purpose.Thanks,Rob

Hi,I am developing an application on SPC58EC that uses the serial with DMA for reading.I'd like to know if there is a way to know and get the position where it's writing in the buffer. I mean something like the corresponding "__HAL_DMA_GET_COUNTER(...)" or to the "...->CNDTR" register of the STM32.I already use the receive callback that trigger at the end, but it's not enough for my purpose.Thanks,Rob

Hi all, I got back on a project on the SPC574K2 I paused a few months ago and decided to start over from a green-field environment.I then downloaded and installed SPC5Studio 6.0.0 Doyle which came along with version 1.16.1.20210914101245 of the LLD sdk.Unfortunately my project builds fine but it is not running anymore due to a problem in board clock management (I', using the EVBoard)To have proof of evidence for this I re-installed 6.0.0.Asimov (which instead comes with LLD version 1.13.1.20200626121018 with which, instead, my code (AND the EXAMPLES provided by ST) builds and runs just fine Needless to say I'm pretty unhappy of this finding which came out without any explicit notice >:( Has anyone run into similar issues? how did you got away?Thanks in advance

HelloI intend to use SARADC with DMA and I'm not able to configure it. SPC5 Studio provides examples that I'm using but in the configuration options of other SPC5 models in SARADC Configurations the option DMA configuration appears. On SPC58EE84E7 does not appear. How should I proceed?Thank you!!

Hello, I am a Newbie.I have one IC marking number.I have to find the stm part number and its datasheet.Anyone please help me.Marking Number: SPC5777CCMME3 3N45H CTUS2052A PZUSCTA

..

Fully deployed with mobile phone Android and iOS APP, web application and Windows desktop application, AEK EXPLORER is now your best companion to discover AutoDevKit ecosystem and generate projects on the fly!Mobile APPs - STSW-AEKEXPLORER https://lnkd.in/dn6sKMvUDesktop for Windows - STSW-AEKEXP-DSK https://lnkd.in/d6yyCcqPWeb Applications - https://lnkd.in/dmQ5877t#automotive #transportation #autodevkit #android #ios #fastprototyping #embeddedsystems

i m working with SPC584xxx series MCU and trying to work with timers interrupts.using 1ms timer for calculating times for operations and using 10ms timer for work.but when 10ms timer work, 1ms timer is waiting and not triggering until 10ms timers work done.i just wanna see the how the priorities are working but i couldn't get what i want.i made all settings via gui and adding callbacks manually.should i add something else?

HiI had a question about RTC in SPC560bxx.When you read the RTC documentation carefully, you will notice that it is actually a 32-bit counter that also operates in low-power modes and issues interrupts.This module is just a counter and there is no register to preserve value in low power mode.Am I right about that?How to use RTC in low power modes?Is it used only to wake up the chip?Thanks

This message is not supported in the TESEO LIV3F module .

Hi,i can't find the reboot code the spc5 core.I mean the equivalent code for SPC5 of STM32 HAL_NVIC_SystemReset();Thank you

Is there any information about the maximum number of tracking channels? Is it a pool of channels distributed between enabled gnss systems or does it exist a maximum number of channels available to a GNSS system? (In particular for Galileo) There are maritime applications that will utilize the RLM message offered by Galileo. In the performance standard for those applications (EPIRB,PLB) it is required that 90% of the Galileo satellites above 5 deg must be tracked in case some of them will transmit the RLM message. Can Teseo-LIV3F meet such a requirement with the final Galileo constellation? There will probably be up to 12-13 satellites in view.best regardsMads-l

 i want to flash program to target board and also debug which is suitable for my part number and also i want to flash program to target board without PC support for industrial purpose(SPC5-UDESTK-EVAL) is this ok for my requirement

I am planning to use SPC584B70 MCU.During the review, I have a question in the datasheet.​​In the custom version(6. Ordering information):​0 = 4x std CAND = 4x ISO CAN FDG = 8x std CANH = 8x ISO CAN FDE = 8x std CAN / EthernetM = 8x ISO CAN FD / Ethernet​​If I choose D version, can't I use 'standard frame CAN'?Can 'extended frame CAN' be used?Likewise if I choose version 0, can I only use ISO CAN FD?​​​Please help me.Thanks.​