STM32CubeIDE (MCUs)

Hi all,I would like to know how to add the packets 7zip and Srecord in a CubeIDE project.I'm working on a project I didn't start and after compiling the IDE returns the error messages "7z is not recognized as an internal command" and "srec_cat is not recognized as an internal command". How to solve this issues? I already have both packets installed in my machine.Thank you! 

Since upgrading to 1.17.0 compile times have went from a pleasant time to wow, that is slow.  Anyone else experiencing this?Basic project from template: 22:45:47 **** Incremental Build of configuration Debug for project CompileTimeTest **** make -j4 all arm-none-eabi-size CompileTimeTest.elf text data bss dec hex filename 11996 9 1644 13649 3551 CompileTimeTest.elf Finished building: default.size.stdout 22:47:00 Build Finished. 0 errors, 0 warnings. (took 1m:13s.194ms) I've tried 32 cores to just 4 and the time difference is in a few seconds.  All build times are now in minutes when they used to be less than 20 seconds.

Where can I find the correct manual for the CubeMX module contained within the CubeIDE v1.17.0. Specifically looking for info on the Project Manager/Boot Project Checkbox and how to disable the creation of the Boot Project seen in the Project Explorer. I am using STM32Cube FW_H7RS V1.1.0 on the STM32H7RS Nucleo Board.

I selected the processor in CUBE IDE to see how much space the sd card and h264 codes will take up in ram and memory on the STM32N657Z0HxQ processor, but I got the error “The target device ‘STM32N657Z0HxQ’ is currently not supported by STM32CubeIDE”. What should I do? 

Hi,I just found out <uchar.h> is missing from standard c header files in \STM32CubeIDE\plugins\com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.12.3.rel1.win32_1.1.0.202410251130\tools\arm-none-eabi\include. How am I supposed therefore to use char16_t and char32_t then? Ofc I could just define them myselves but I'd rather work with default library headers tbh. I checked wchar.h and stdint.h to see if those types were defined there with no avail.I'm quite surprised such a basic header is missing?Thanks. 

Win 10, x64, STM32CubeIDE version 1.17.0I'm trying to open a CubeIDE project from a workspace but it just doesn't load, see image below. I select the folder for my workspace, click finish & am then told that there are no projects in the folder. Yet the folder does contain a CubeIDE project. The open project option is also greyed out in the projects menu pull down.What am I missing here?

I'm trying to create a new project from a exiting ioc file.When I click the "finish" button, it shows a progress bar but disappear very fast, and it did nothing else. No new project created, no nothing. I don't know what went wrong. Is there an error log or something so that I can see what's happening?

Please listen to the trouble and cause when debugging with CubeIDE that I was troubled withThe cause is very simple once you understand it, but I couldn't think of it at the time of trouble. Details of the trouble A CubeIDE sample program was executed to test FLASH read/write. The program seemed to work correctly, but when the debug connection was made again, only a part of the FLASH content was recorded and the second half of the memory was in ERASE state.Cause As you probably know, when you run debugging using ST-LINK on CubeIDEprogramming code to MCUafter the code program is finished, the MCU enters an uncontrolled free-run stateThe MCU is not controlled by the debugger (free-run) and the written code is executed.Start of debugging processMCU is reset and stops at the start code Although it depends on the environment, the free-run state lasts about 1 second, and in this sample program, the erasure of FLASH was completed and the programming of FLASH was executed until halfw

Hi,When the sample program FLASH_EDATA_EraseProgram is executed on the NUCREO-H563ZI board, it appears that 0xAA55 is correctly written to the high-cycle data flash. However, when debugging is terminated and the board is rebooted, the data in the latter half of the flash is not written, and it remains in the Erase state (0xFFFF).Since the memory in the Erase state is not at a sector boundary, it cannot be considered that it was erased later. Also, although the memory in the Erase state causes an NMI interrupt when read, it is possible to write to it, and after writing it becomes possible to read normally.Please give advice how to work with the high cycle data!STM32CubeIDE 1.17.0NUCREO-H563ZI board NUH563!$MR2STM32H563ZIT6U AA327 VQ revision XFLASH_EDATA_EraseProgram 1.12 Debug run "FLASH_EDATA_EraseProgram", break main.c:215 and reset CPU, Memory Monitor 0x90002700High-cycle data memory dump after HAL_FLASH_Program() Debug stop, debug run again, break main.c:167 and rese

"main.c" is not visible.This is the screen I want.  However, this is my actual screen. I am sure I have chosen the board correctly.

There were MANY demo programs on the evaluation kit on first power on.  Since I have been trying out different example software, I see that I have flashed over the top of the original demo.  I suspect I just need to build another project with another example program, but there are so many!  Anyone know what the example program is called that the evalulation board came with?

Hi All,I have a problem on H755 Nucleo which is that the M4's tick doesn't seem to be advancing.Digging a little deeper I can see that uwTickFreq is zero, but I can't see why that's happened. There must be something wrong in my .ioc file since I've hardly done anything in the M4 code (M7 is working fine).Currently, both cores boot with FreeRTOS on each. I can step through a simple bit of code on the M4 using osDelay(), however as soon as HAL_Delay() is called that's the end of it.I have searched this forum and read several Q&A on this topic, but none of them seem to match my situation. I'd be very grateful if anyone can spot an obvious error in my .ioc file.Thanks

Hey,I am using the STM32f769NIH controller and my application has Touchgfx and freeRTOS enabled. The code downloading time is too slow and I want to speed it up.I figured that turning off the external loaders in the debug configurations yields a smaller code size. Originally it was 6.08 MB and after the it became 256 KB. This .srec file takes mere 6 seconds to download while the 6.08 MB file took 1 minute. The issue is the IDE keeps waiting for debugger connection for almost 1.5 minutes before it finds it and then downloads the code (Image attached). I need the command which can generate the .srec file with input elf file. It should exclude external loaders. I'll manually download this .srec file from the STMCubeprogrammer.Currently I'm using this command which generates the file but the code doesn't work. "%OBJCOPY%" -O srec --gap-fill 0xFF --strip-debug --srec-len=32 --srec-forceS3 --remove-section=.loader --remove-section=*FlashSection "%BUILD_DIR%\STM32F769I_DIS

Hi boys and girls from ST,I am testing your CubeIDE and it it catastrophe.1/ I tried to open a new project in CubeID and I ascertained that I can not add assembly file (s). How I can create project with only one file - in assembly. :)2/ I tried to close my project in CubeIDE, but the project stayed opened. When I tried to run the already closed project the project was compiled and uploaded to my processor vis STLINK :) it is very cute. Is it a special way defence against an enemy ? :)3/ Did you consider to connect to MS Visual Studio (VS) developper team and use and to develop VS together with MS people instead of your queer CubeIDE ?4/ Are you planing to completely rework your CubeMX ? For example the "Clock" configuration picture is really terrible. There is no visual connection to individual registers RCC. It it queer chaos.Jerry

Hi,I am using stm32f439zi eval board for TCP communication. I can ping the board from host. It shows TCP connection error in Hercules utility. I am using port number 7 to listen to server. I am not sure whether I am using correct port number for the board. Please correct me if I am wrong.

Hi there, i configure power as PWR_DIRECT_SMPS_SUPPLY, but after generating project,  both PWR_USE_LDO_SUPPLY and PWR_DIRECT_SMPS_SUPPLY are defined. This will cause program exception sometime, i have to remove USE_PWR_LDO_SUPPLY.  I took several days to locate this issue!so my question is:1. Why is USE_PWR_LDO_SUPPLY always defined by default?2. Where are these preprocessors comming from? so I can configure. Best regardsPeter  

I am trying to debug the STM32H755 within CUBEIDE but the current segger J-link drivers say that core is not supported. The segger website lists it as supported and it works without issues in their debuggers.I am wondering if there is a workaround or way to get it working with the CM4 core?CM7 works as expected.Thanks.

When I click run to program, it pops-up an error, see attached error picture:I checked the configure setting, it shows in the attached files.and the IDE log: Log output file: C:\Users\Johnson\AppData\Local\Temp\STM32CubeProgrammer_a14788.logST-LINK SN : 361F0D14C216303030303032ST-LINK FW : V2J45S7Board : --Voltage : 3.16VError: ST-LINK error (DEV_TARGET_RESET_ERR)Encountered Error when opening C:\ST\STM32CubeIDE_1.16.1\STM32CubeIDE\plugins\com.st.stm32cube.ide.mcu.externaltools.cubeprogrammer.win32_2.1.400.202404281720\tools\bin\STM32_Programmer_CLI.exeError in STM32CubeProgrammerShutting down...Exit.I don't know what had happen. I can use STE32CubeProgrammer flash the firmware success. But can not debug with STM32cubeIDE.

I was having this problem https://community.st.com/t5/stm32cubeide-mcus/stm32cubeide-user-interface-freezing-in-ubuntu-22-04-wayland/td-p/656993 so I tried the solution and it fixed the freezing, but now the IOC editor doesn't render, such as with https://community.st.com/t5/stm32cubeide-mcus/stm32cubeide-user-interface-freezing-in-ubuntu-22-04-wayland/td-p/656993 . It's very weird because it only started after a recent restart, which tells me there was something I updated that did this but I don't know what.So, I either get the IOC not rendering, or the IDE freezing. Not really sure how to fix this. Please advise.

With STM32CubeIDE 1.14.1 running on Windows10 the login to myST does not work anymore. Clicking the menu item or using the hotkey Alt-L simply does nothing - no reaction, no error message, NOTHING. It worked some time ago but all of a sudden does not work anymore. The Eclipse Log shows "Command 'com.st.stm32cube.ide.mcu.ide.command.userAuth.login' failed" if I try to login using myST.Also the HELP menu items like "Manage Embedded Software packages" do nothing at all.I tried to reinstall the software but the same result. My problem is now, that download of so far unsused processor support packages does not work, too.Any idea?

When I activate the option "-mstrict-align" in STM32CubeIDE 1.17, I get "arm-none-eabi-gcc: error: unrecognized command-line option '-mstrict-align'; did you mean '-Wstrict-aliasing'?"I'm using GNU tools for STM32 12.3.rel1.

Hi,I cannot find any information about the possibility to use github copilot in the STM32CubeIDE. Is it available or are there any plans to support it in the future?Or do you recommend using it in VS only?Thanks you for your answer

I'm using STM323H755ZIT6 NUCLEO board, STM32CubeMX 6.13.0 and STM32CubeIDE 1.17.0.In my scenario, I created a project in STM32CubeMX 6.13.0 and generated the project. After that, I opened this project in STM32CubeIDE 1.17.0 and added paths for external folders in Paths and Symbols. Later, I edited the .IOC file in STM32CubeMX and tried to regenerate the project, but an error popup appeared.ERROR POPUPAfter this popup, I clicked the OK button, and STM32CubeMX showed 'Project Successfully Generated.' However, when I tried to build the project in STM32CubeIDE, it failed to build, and errors appeared, such as:D:/NAVANEETHAN/CoffeeMaker/DisplayControl/Project/DisplayControl/CM7/Core/Src/main.c:116: undefined reference to `HAL_Init'D:/NAVANEETHAN/InstalledSoftwares/STM32CubeIDE_1.17.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.12.3.rel1.win32_1.1.0.202410251130/tools/bin/../lib/gcc/arm-

I am a beginner in ethernet TCP protocol. I wanted to establish tcp connection between host and target(stm32f439zi). I don't know how to find ip address of an ethernet port connected in stm32.Can anyone help me to learn from basics and develop code and pass message between host and target (both way).  

Hello,Does someone know where to find documentation on how to launch build using STM32CubeIDE line command on Windows?To specify my need, I have the command below and I would like to add an argument to redirect build log to a custom file :stm32cubeidec.exe -nosplash -application org.eclipse.cdt.managedbuilder.core.headlessbuild -data .\ws -importAll .\Path\to_project -build output_binaryI found the line command in a script, but there is no indication on where to find documentation.Thanks