STM32CubeIDE (MCUs)

when i import an example from FW package, i got this message. i have no idea what "nature" is, how could i solve this error? thanks for your support !

Hi,I am using the STM32H7S78-DK board along with STM32CubeIDE for programming. My goal is to configure Ethernet and enable UART4 for debugging purposes. However, I am facing issues with the memory configuration file `STM32H7S7L8HXH_RAMxspi1_ROMxspi2.ld`.Here is the scenario:1. I have configured Ethernet GPIOs according to the datasheet and implemented the UDP server example from the reference link: STM32 ETHENRET UDP SERVER 2. When I enable UART4 for debugging with `STM32H7S7L8HXH_RAMxspi1_ROMxspi2.ld`, UART4 does not work.3. If I disable the Ethernet functionality and use the default linker script `STM32H7S7L8HXH_default.ld`, UART4 works as expected. However, the Ethernet configuration is crucial for my project.4. When I use `STM32H7S7L8HXH_default.ld` with both Ethernet and UART4, the build fails with a "RAM Overflow" error:- Error: "region RAM' overflowed by 17160 bytes"Questions:1. How can I configure UART4 to work with `STM32H7S7L8HXH_RAMxspi1_ROMxspi2.ld`?2. Could you g

Hi,when I am plotting data with SWV timeline, the timeline randomly plots -500000000 or lower values, while plotted variable does not drop that low. Don't you know, where could be the problem? I did the easiest program, but the SWV still has this error.The frequency of SWV is set correctly to 170MHz.

I have a VM running with Ubuntu 22.04 -- a brand new, clean installation.In case it matters...The host machine is a Mac M3I actually had this running some time ago, but have since deleted the VMI am working with an offshore team doing some dev work for us and want to create a similar environment. I am doing this to remove any ambiguity about our collective setups when it comes to building, testing and troubleshootingSteps to ReproduceDownload the Debian-specific ZIP file - in my case it was:en.st-stm32cubeide_1.17.0_23558_20241125_2245_amd64.deb_bundle.sh.zipExtract the contents of the archiveI used the Ubuntu Archive Manager and also...Used a strictly command line approach, like...unzip en.st-stm32cubeide_1.17.0_23558_20241125_2245_amd64.deb_bundle.sh.zipchmod +x ./st-stm32cubeide_1.17.0_23558_20241125_2245_amd64.deb_bundle.shsudo ./st-stm32cubeide_1.17.0_23558_20241125_2245_amd64.deb_bundle.shAccept the Ts & Cs -- also selected Yes to the prompt:Do you want to install Segger J-Li

Background, We have projects where the SYS timebase is set to a peripheral timer. Currently, this no longer works with the new cubeMX version.In STM32CubeIDE 1.17, migrating projects to the updated CubeMX version (6.12.0 -> 6.13.0) modifies the FreeRTOSConfig.h file in Core/Inc. Specifically, the following changes occur:Old lines (140–143):/* IMPORTANT: This define is commented when used with STM32Cube firmware, when the timebase source is SysTick, to prevent overwriting SysTick_Handler defined within STM32Cube HAL */#define xPortSysTickHandler SysTick_HandlerNew lines (144–146):/* IMPORTANT: After 10.3.1 update, Systick_Handler comes from NVIC (if SYS timebase = systick), otherwise from cmsis_os2.c */#define USE_CUSTOM_SYSTICK_HANDLER_IMPLEMENTATION 0The old configuration ensured that FreeRTOS used its SysTick implementation from port.c. Specifically, xPortSysTickHandler in port.c was renamed to SysTick_Handler, matching the function name in the startup file's interrupt vector.With

I am porting over an application from SystemWorkbench to CubeIDE. This application has a bootloader and application. The application is loaded at 0x08008000. With SystemWorkbench I added a linker flag of -nmagic, but in CubeIDE that throws an error. When I try to debug the app, it breaks at an address inside the bootloader memory space and gets stuck there, never reaching the application at 0x08008000. Can someone point me to some documentation on how to make this work?Thanks.

Hello,I’m trying to program my STM32 microcontroller STM32F301C8T6TR using ST-LINK, but I keep getting the "DEV_TARGET_RESET_ERR" error. Here’s what I’ve tried so far:Reset Pin (NRST): Connected directly to the RST pin of the ST-LINK.BOOT0 Pin: Connected to VCC during programming (with a 10k pull-up resistor).Power Supply: The microcontroller is powered with 3.3V (measured voltage is 3.26V via ST-LINK).SWDIO and SWCLK: Checked the connections with a multimeter, continuity is fine.Firmware Update: Updated the ST-LINK firmware to the latest version (V2J45S7).STM32CubeProgrammer: Tried "Connect Under Reset" and reduced SWD frequencies, but no luck.External Reset Circuit: I’m not using any external reset circuits or chips.Alternative Attempt: Added a 1k resistor to the NRST pin, but it didn’t solve the issue.Despite all these steps, I’m unable to connect to the microcontroller. Has anyone encountered this problem before or has any suggestions?As it happened before, I could write blin

Hi Folks,All of the examples I see online show that in the CubeIDE there is a selection to enter the rank of the A/D inputs. I can't find that in my version which I believe is the latest version. Can someone point me to how I should accomplish this?I'm using IN5, IN6, IN8 and IN9. I want to use DMA and read the values once per call to a function.Thanks,Richard 

I am trying to build the toolchain and I'm looking for some help getting over this hurdle.When I run build-prerequisites.sh on Ubuntu, it stops when it tries to run "helper.py" with the error "You need to install python-magic."  Helper.py is running python3 which I've tried linking to Python3.4, 3.5, 3.8, etc.  If I change it to use Python2, it gets over this error but fails with a different one regarding a FILE==STDERR parameter being passed to the Print function (I'm not a Python guy).Just starting Python2 and typing the line "Import Magic" works.  Any other Python does not work.Let me also put out that what I am really trying to do is get the sources for all the running code so when I debug I can debug into the function.  It might be that I can just take that "src" directory and park it somewhere and get the same result, but it's more figuring out than I have time for.I only need the build for Windows also and I assume I need the "debug" type but there is zero do

I've been trying several days to just get any project up and going for the STM32WBA52GU. As soon as I add the WPAN middleware, the HAL definitions go haywire with errors when I compile it. I've tried following tutorial in the wiki with documentation, but nothing seems to be working. I can import an example for the Nucleo WBA55, and it will compile. However, using the same settings for a new project fails (even when trying to target the WBA55). Any help would be appreciated. I'm using STMCubeIDE 1.17.0 with the latest firmware libraries.     786 | HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(const RCC_PeriphCLKInitTypeDef *PeriphClkInit); | ^~~~~~~~~~~~~~~~~ | HAL_CRC_StateTypeDef ../Drivers/STM32WBAxx_HAL_Driver/Inc/stm32wbaxx_hal_rcc.h:2452:1: error: unknown type name 'HAL_StatusTypeDef'; did you mean 'HAL_CRC_StateTypeDef'? 2452 | HAL_StatusTypeDef HAL_RCC_DeInit(void); | ^~~~~~~~~~~~~~~~~ | HAL_CRC_StateTypeDef ../Drivers/STM32WBAxx_HAL_Driver/Inc/stm32wbaxx_

Hi,I would like to use the patched compiler from ST to build my project for STM32G4.My goal is to setup a Docker container to be able to build the project in an CI environment on a server. Do you have a docker container available, where gnu-tools-for-stm32 is already installed?I cloned the repo from Github (https://github.com/STMicroelectronics/gnu-tools-for-stm32) and tried to run the build-toolchain.sh script, but I got many errors. Is there some documentation how to install this toolchain?Best regards,Flad

I am currently in need of the STM32Cube IDE version 1.12.1 for a specific project I am working on. If anyone has a copy of this version or knows where I can download it, I would greatly appreciate your assistance.Thank you in advance for your help!

Hi,I'm using STM32F423ZHT6 Board. I want to upload the image file (.bin) to my MCU board via STM32CubeIDE. Please any one help me to complete my task.

When compiling and debugging with STM32CubeIDE, it shows: uwTickprio0 at 0x200000004 has no available source and the burner is using stlink v2. What is the cause of this problem?    

How do I configure BLE on the Steval Stwin board through CubeMX?

Having upgraded CubeIDE to version 1.17.0 using 'check for updates' and found it didn't work for my project, I tried to go back to version 1.15.1 using the revert button.  After running this, the IDE would not start and give an error message indicating that the ~/.eclipse/com.st.stm32cube.ide.mcu.rcp.product_1.15.1_139064214_linux_gtk_x86_64/configuration/config.ini file had blank filenames.  I found what looked like a complete file at /opt/st/stm32cubeide_1.15.1/configuration/config.ini which I copied to the above location and which then worked OK.

Hello,I  would like to know how to update STM32CubeIDE (and probably STM32CubeMX) correctly ? The last update I lost all my programs, do you have any links, information or advice on this subject ?THANKS

Hi ,i want add api for vl53l1x (en.STSW-IMG007) in my project whith STM32 CUBE IDE ,i use a board stm32l031 nucleo32 , i configurate i2c whit st32cubemx and import in stm32 cube the path of include file and source of lib API FOR VL53L1X but i have may error whie compile it

Hello,I recover from a project but when I compile there are errors.And yet this file exists in the projectI think that in this tab the configuration is not correct, how can I change the configuration so that it is taken into account in my workspace ?Thank you for your helps.Regards

Apologies for the newbie question, but I am trying to init a project with the following as starting point:STM32CubeIDE v1.17.0NUCLEO-F446REC++ DevelopmentFreeRTOSCAN Interface When creating projects it looks like there's a lot of options, but I can't seem to get the combination of C++ and STM32CubeMX file for my NUCLEO board.  Two options I've tried for creating a project: The New "C/C++ Project" with "C++ Managed Build" option:Produces a `hello-world.cpp` with the following contents:   #include <iostream> using namespace std; int main() { cout << "!!!Hello World!!!" << endl; // prints !!!Hello World!!! return 0; }  However it has on specific build target, no STM32CubeMX .ioc file, or ld linker file. The New "STM32 Project" with "C++" as the "Targeted Language" option:I get the STM32CubeMX .ioc file for the board but everything otherwise still looks like a C project. All the generated code is in C and the inclu

Hi, I am using STM32CubeIDE version 1.17.0. I have compiled a project fine with no errors showing on the build console and the elf file is generated successfully. However, STM32CubeIDE is still showing errors on my project which, of course, are false positive. These errors on the GUI were not even reset when I clean the project. I tried restarting the IDE but with no luck. Rergards,Hani

Hi all,Very new to STM32, day 2 now, managed to get some UART output and call into C++.However when I try to use standard C++11 threads I get this error "'mutex' in namespace 'std' does not name a type". I believe this is bc arm-none-eabi-g++ is configured with --disable-threads (checked with "arm-none-eabi_g++ -v").Any way to get (standard) threading support? Should I try to rebuild the toolchain with --enable-threads?

Hello,I've found an issue in STM32CubeIDE1.17.0.When creating a project with USB Device used as a CDC Class and FreeRTOS an include is missing in app_freertos.c:#include "usb_device.h"The project runs properly, but a warning is issued at compile time:implicit declaration of function 'MX_USB_Device_Init' [-Wimplicit-function-declaration] app_freertos.c /STM32G473CCU_FAN_CONTROLLER/Core/Src line 117 C/C++ ProblemAs far as I remember, this issue was present in previous versions of STM32CubeIDE.On the other side I don't remember having encountered this issue when using USB Host MSC class with FreeRTOS in projects targetting the STM32F429

Please don't put the entire question in the Title - see Posting TipsI am using Microsoft Surface Pro + Copilot and trying to load code on STM32L476.

It worked fine until yesterday, but the program seems to have been updated today, and I've been getting that error ever since.The same problem occurs when all the codes are cleared and only the initial init function is executed.I wondered if it was a program problem, so I reinstalled it to the previous version and tried to operate it, but the same problem occurs even if I try to reinstall it to the latest version.I have the same problem when I create a new project and debug it, and I need advice from people who have experienced this.This error occurs when MX_GPIO_Init(); code is executed.