About

I have registered and validated my email, got as farr as choosing a password but then an error happened. Help please  

Hi,How do I email STMicroelectronics the company? I have basically looked everywhere in their contact pages and found zero contact email addresses, where I can ask for their help in private, regarding product information.How can I proceed? 

Hi,I am not able to send data/attachment with my messages. I see this: Instead of this:I tried different web browsers but no good.Any idea ?Thank youFerro 

There's a lot of "information" posts appearing; eg,https://community.st.com/t5/stm32-mcus/how-to-obtain-and-use-the-stm32-96-bit-uid/ta-p/621443This is all very good & useful but, in the activity listing, they are indistinguishable from user questions:It would be useful if these were clearly differentiated.

As the title says, the ST "New Products" page lists some products that are not new at all and out of the scope of the timeframe set on the same page.Example:At the point of writing this forum entry, the page, while set to "1 Month", lists the "HCC4049UB" under "Space Products" and the "AVS08CB" under "Thyristors (SCR) and AC Switches".When checking with the waybackmachine, these products have been listed since at least april of 2021! The webpage description and layout implies it lists products that have been released in the selected timeframe, so products like above should certainly not be listed anymore.

When in post I highlight top line (or few top lines) usually by dragging from right to left (this may be important), and then copy to clipboard using Ctrl-C, clipboard contains also items above the text of the post, i.e. timestampt, title and avatar, even if they were not highlighted.For example, here, only one line of text is highlighted:  yet copy/pasting results in :   waclawek.jan Guru  ‎2024-02-16 06:42 PM > The UART->RDR is 16-bit wide, which can be exploited to indicate what in the buffer is dirty vs clean.  Win10, FF115.7.0.JW

Hello everyone and speciallyone whocame up with this idea to insert text with Ctrl+V with this fffffffng boxIt wold be great if you doing plane text insert without this _tupidboxwhen pressed Ctrl+vHave a nice time, ST teamand this message I had:"Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and submit the message when you are satisfied."This is much too clever 

Here's the URL for reference: https://community.st.com/t5/image/serverpage/image-id/44904i6E7E4466B43E7167/image-size/large?v=v2&px=999JW

i.e. title only, and as many threads per page as we've set up for the forum itself?There's really no reason to make it different, and as it is now, it's similarly unwieldy to read/follow/investigate as the forum was before.Thanks,JW

JW

The year of 2023 was a transformational year for the ST community as we migrated to a new platform. We appreciate your patience, engagement, and feedback throughout this transition. It is time to look back and highlight the most engaged areas in the ST community (time period: from June to December 2023). TOP3 community superusers that authored the most solutions: @TDK with 361 solutions authored @Tesla DeLorean 152 solutions authored @waclawek.jan 90 solutions authored TOP3 most viewed conversations: 6,521 views Solved: STM32CubeIDE 1.13.0 problem 3,524 views Solved: has no explicit encoding set warning 3,489 views STM32F4 Retriggerable one pulse mode TOP3 forum boards with the most accepted solutions: 1,039 accepted solutions STM32 MCUs products 318 accepted solutions STM32CubeIDE (MCUs) 187 accepted solutions STM32 MCUs Embedded software TOP3 most viewed knowledge base articles: 3992 views How to use regist

The "Copy to Clipboard" button is good to have, I guess, but in its current implementation you can't see what code is behind the button. Make it smaller, make it stay in the same position on a scroll, or something else so text can be seen. In contrast, the View More button is a great addition. More good features like that please.

Getting AI-generated responses from a variety of prompts is more accessible than ever. The accessibility and ease-of-use have also impacted the ST Community, as we have observed posts predominantly generated by AI. These guidelines are written to provide you with our current stance on generative AI.  The ST Community does not allow the usage of generative AI to predominantly generate posts and replies. We depend on and trust our community users to provide original, verified replies and solutions (see ST Community Terms and Conditions, article 3.6.1, section h.)Generative AI cannot ensure a legitimate and factual answer, even though the presentation, language, and formatting may seem appealing and legitimate. This is also known as a “hallucination” meaning that the response seems coherent, but the actual content is not factual. In some cases, responses provided by generative AI can be harmful and unsafe.Therefore, the consequence of using generative AI is considered a de

It seems that they do mean what they say; eg, "a week ago" does mean posts 7 days old (or more?)But this seems a rather useless filter?Surely, more useful is "within the last 7 days", "within the last month", etc?In other words, "not older than 1 week", "not older than 1 month", etc.As in, searching for stuff where "I know I saw this recently - not more than a week ago". Can we at least have these added?And there really needs to be something between "a month" and "a year" - at least "a quarter" (3 months) and "half a year" ? Or just let us enter a date range

hi, dear teamI have bought the parts FXLS8967AFR3   from two  franchised distributor, and found their marking label character are different, pls see attached pics, and could you help confirm how to indentify the marking label? 

It's Sunday, so probably not many users noticed the outage: Maybe a more descriptive message would be appropriate for these occasions.JW 

Please pass to the account department since it is not listed the location list.  I have old work emails *** and *** and also *** and *** from my previous position where all of these accounts are closed.   I wondered if the points or score could be reflected/updated in *** I have been in an embedded MCU with STM32 for some time.  If possible, copy all STM32 forum/community topics/discussions to *** so I can refer to them for future reference. How long you keep it there before disposal?, how to back them up into file (can you send via ***. Happy New Year 2024, and kind thank you for the support during 2023 and before that. Riscy  PS: In case you see gmail/yahoo, do you tend to be biased against supporting it because it is not a company email? I am always applying STM32 firmware work for industrial applications, not for toy things from Santa. PSS: In case you making a new MCU, try to include the end of the line terminator char in the USART

When trying to post, I get an assortment of problems: an edit pane into which I can't write; various red warnings when trying to preview or send the post, etc.I presume this is exposed as consequence of the "permanent reload on FF" problem: I click on "stop loading" icon to prevent the permanent reloads, and probably some of the magic javascriptoids won't load. Nonetheless, this may happen also if users for any reason click on the "stop loading" icon of browser during the first loading of the page, or some of the files simply won't load, e.g if using a slow and intermittent internet connection (yes, not everybody has top notch internet connectivity all the time, and yes, that should've been part of the testing).There's no remedy to this problem except to ditch Khoros and get a decent forum software. Yes, I know it came quite soon.I wonder if you've tried it on FF at all by now.JW 

There are many threads where users have been unable to attach IOC files. Here is one of them:https://community.st.com/t5/stm32-mcus-products/uart-cannot-set-high-baud-rate/m-p/621673#M230659 The IOC file type is clearly not a security concern. Is there some other reason they are blocked or is this just an oversight? Can we get it corrected? Edit: I have no problems attaching an IOC file. So is this a permissions issue? New users can't attach files or something? I would say even a first time user first time poster here should be able to. Coming to a forum to ask for help and including the relevant file seems a very reasonable thing to do. Cheers.

Hi all,I´posted a shutdown issue with the L4981A controller and unknowingly the profile page had broken content and didn´t provide all the details. As such I got a reply with a case number from an St employee requesting my company info (which was already given) in the profile site, but have heard nothing since. Has this "dried up" ? I tried to access the profile site but the page didn´t open. All I get now from mySt is more login details on top of the one already given ! and a blank page getting no where.  It has taken me 1/2hr to get to this forum. Browser firefox, otherwise a relatively new notebook.All very disappointing. Time for customers to be better looked after.rJ

Answers to other ones posts are placed directly under the posts. This is unusual to most other forums. I dont know if i like it or not. But at least should be clearly(!) visible, that this is an answer. Use an indentation? Also its kinda confusing to have a solution to appear twice in the thread.There are so many things a developer has to read through. Please dont make it harder with a confusing forum.

Can we have more than 5 posts displayed at once in user's User Activity list? For example the same number as the number of threads displayed in forums views (as it's substantially the same amount of information, and it's user settable, somehow, somewhat)?Thanks,JW 

JW

Incidentally, if Firefox browser Privacy and Security -> Do Not Track set to Always, then it is not possible to reply to posts here. Nor does the Accept as Solution option appear.

When a link is given to a particular post and the post has a file attached, two horizontal lines appear under the small file icon.https://community.st.com/t5/stm32-mcus-products/stm32f4-hardfault/m-p/604656/highlight/true#M226598As can be seen in the picture, the lines do not appear on other posts with file attachments. And, if one takes a link to the second post of the two, then the lines appear on the second post but not on the first one.