STM32CubeIDE (MCUs)

I tried to analyze our mixed C/C++ STM32F4xx project, but all functions in *.cpp sources including "main()" are not shown by default, until I deactivated the "hide dead code" checkbox.ST,could you please confirm the bug in new Cyclomatic Complexity tool?Hiding unlinked code would be useful indeed, if all actually called C++ functions would be reported correctly.

I get a multiple definition error for every variable declared inside a .h file after updating from CubeIDe 1.8.0 to 1.9.0. The previous CubeMX version was 6.3.0 and now it is 6.5.0. Before updating there would be no errors while building the code. The .h file has the header guards generated by the IDE. Is there any way to fix this?

Hello,I am trying to print my logs in Cube-Ide debug session using printf. But i cannot see the logs in the console.So, is there any solution to this.Thank you, Harsh 

Hello,How can I add the [-Wenum-conversion] warning check?If I check the "Warn for implicit conversion (-Wconsersion) I have many warnings from ST originated files (stm32l4xx.h) so I can not use this option....Best regardsMich 

I have a Nucleo-H755Zi-Q and a IKS02A1. I am using the X-CUBE-MEMS1 Package. In the configurator, when I select "Board Extension IKS02A1"  I get the following error:#error "Board Pin number not defined!! Add USE_NUCLEO_144 define within stm32h7xx_nucleo_conf.h file" 61 | #error "Board Pin number not defined!! Add USE_NUCLEO_144 define within stm32h7xx_nucleo_conf.h file"#error "Board Part number not defined!! Add one of the following define within stm32h7xx_nucleo_conf.h file: USE_NUCLEO_H745ZI_Q, USE_NUCLEO_H743ZI, USE_NUCLEO_H743ZI2, USE_NUCLEO_H7A3ZI_Q, USE_NUCLEO_H723ZG" 66 | #error "Board Part number not defined!! Add one of the following define within stm32h7xx_nucleo_conf.h file:\(Without selecting "Board Extension IKS02A1" I can compile and run the code on the Nucleo-H755ZI-Q).When I add #define USE_NUCLEO_H745ZI_Q to stm32h7xx_nucleo_conf.h I get the following error:fatal error: stm32h7xx_nucleo.h: No such file or directory 31 | #include "stm32h7xx_nucleo.h" Wha

 Good evening, I have an issue with an STM32L452RET3. When I try to program it using CubeIDE, I get an error like "break at address...". The BOOT0 pin is connected to GND via a 10k resistor, and NRST is connected to GND through a 100nF capacitor. When I try to read the memory with CubeProgrammer, there are no problems. Does anyone know how I could solve this issue? The L452RE MCU doesn't have a BOOT1 pin.I have a STLINKV3Set debugger, but also I tried with a debugger from a Nucleo Board by removing the jumper etc..

Hello All,I am getting this error while compiling the project " The float formatting support is not enabled ".I have checked use float with "printf from new lib-nano" in MCU/MPU settings save and recompile the problem didn't go!!I have added manually "-u_printf_float" in MCU/MPU GCC linker with no success.I am using the latest version of stm32cubeide 1.16.1 the MCU is stm32g031f6p6.my code in while loop: HAL_ADC_Start(&hadc1); HAL_ADC_PollForConversion(&hadc1, 20); voltage = (HAL_ADC_GetValue(&hadc1)/4096) * 3.3f; printf("Voltage = %0.2f\n", voltage); HAL_Delay(1000); 

Hi all,Version: 1.15.1MCU : g473Before investigate deeply on my own I wonder whether if anyone have faced the same problem with Interrupt table in general ...I placed a breakpoint there :void SysTick_Handler(void){/* USER CODE BEGIN SysTick_IRQn 0 */ /* USER CODE END SysTick_IRQn 0 */HAL_IncTick();/* USER CODE BEGIN SysTick_IRQn 1 */ /* USER CODE END SysTick_IRQn 1 */}and surprisingly the code is never executed !Best regards,    

im trying to create a project that write something in the serial monitor(raed/write) . i followed many tutorials step by step but i everytime my serial monitor doesnt print my message( i used tera term/putty/and even the serial monitor in the ide "command shell console". - i already fixed the baud rate to 115200- i already confugured the usart3 pins pd8 and pb11 or pd8 and pd9 for RX and TX-i already activated the NVIC settings in usart3 menu- this is the code that i used in while(1) part : while (1){/* Transmit "Hello, World!" over USART3 */char msg[] = "Hello, World!\r\n";HAL_UART_Transmit(&huart3, (uint8_t*)msg, sizeof(msg) - 1, HAL_MAX_DELAY); /* Add a delay to avoid flooding the serial monitor */HAL_Delay(1000);}  the code was built with 0 errors 0 warningsis there something that i misssed or i need to ckeck or did wrong im using stm32f407G disc1 board and it's only connected to the c through the cable

STM32CubeIDEVersion: 1.15.1Build: 21094_20240412_1041 (UTC)OS: Windows 10, v.10.0, x86_64 / win32Java vendor: Eclipse AdoptiumJava runtime version: 17.0.8.1+1Java version: 17.0.8.1STLINK V3J15M6B5S1 At localhost, I can use "ST-LINK(OpenOCD)" to debug STM32H723ZG The config file:# This is an NUCLEO-H723ZG board with a single STM32H723ZGTx chip # # Generated by STM32CubeIDE # Take care that such file, as generated, may be overridden without any early notice. Please have a look to debug launch configuration setup(s) source [find interface/stlink-dap.cfg] set WORKAREASIZE 0x8000 transport select "dapdirect_swd" set CHIPNAME STM32H723ZGTx set BOARDNAME NUCLEO-H723ZG # Enable debug when in low power modes set ENABLE_LOW_POWER 1 # Stop Watchdog counters when halt set STOP_WATCHDOG 1 # STlink Debug clock frequency set CLOCK_FREQ 8000 # Reset configuration # use hardware reset, connect under reset # connect_assert_srst needed if low power mode application running (WFI...) res

Custom board with STM32H563 and 32.768KHz LSE and supercap for RTC in Vbat mode. I want RTC longevity in terms of weeks; it lasts 4 days. Is there anything SW can do to extend this time? For short intervals (minutes) the RTC updates fine. Disabling SRAM backup extends the time by 8 hrs. Schematic excerpts... 

Hello together, I have installed the latest Linux mint at me and the latest STM32CubeIDE.My board is STM32L010 Value Line Nucleo-64 (MCU: STM32L010RBT6 64 Pins). I have encountered again the problem with the GDB version.I cannot start the debug mode or run the compiled code.I received this error message."Could not determine GDB version using command: arm-none-eabi-gdb --versionarm-none-eabi-gdb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or director" I have tried to use the previous solution to install the ncurses5. "sudo apt-get install libncurses5 libncurses5:i386".It said the package is not found. Can anyone please provide me any solution here?Thank you! 

1.when i once change the workspace path, the ide always create a older folder in last path, and i still don't know why after i checked every config files in application support, preferences, container, also the app package. 2. and what's more, i also use other ide, and use the same workspace folder ( i like),  ***, it also make a .metadata config file，that cause chaos.

I have the latest and greatest CubeIDE v1.16t.1, confirmed with recent attempts to upgrade it. Recently I have been experimenting with the ultra librarian tool output in the IOC editor, which looks to be extremely useful. I have a project that uses an STM32F401RBTX, it was created by an earlier version of CubeIDE, but upgraded when I opened it.I use KiCAD 5, and have been able to successfully create a symbol on a different project. However, the symbol that it creates for this one has two errors: first the pins are all located on top of each other, and second the poly lines have fractional positioning data that is rejected by the symbol parser. I have attempted to text edit out the fractions, but the pins appear to be stuck together and any attempt to relocate them with the symbol editor fails. I cannot find any information about how to configure the librarian, is there an update or fix for this? Generated zip file is attached.

Can not install software from website official  when I try to click accept

hi i am having a problem with my stm32cubeide, specifically i cant connect to the stm32f407vgt6 microcontroller on my custom board, but when loading or erasing with cubeprog everything goes smoothly.i have tried cleaning my board, updating stlink to v2j45f7, reinstalling stm32cube1.15 since i previously updated to 1.16. still nothing works.can anyone help me?  edit : this my log debug 

STM32CubeIDE 1.16.1 was released on st.com as well as an in-tool update patch aligned with STM32CubeMX v6.12.1 that is available for download. Main issues fixed in this minor release: Fixed issue when install OpenSTLinux MP2 plugin from OpenSTLinux releases Update Sites. Fixed issue on project creation using MP255 devices. Fixes related to the integrated STM32CubeMX [MP25] Major differences in the ST Boards Device Trees between MX and Embedded SW (EV and DK Board) ==> Aligned with STM32CubeMX 6.12.1 Create Project for each MCU: Mcu STM32MP2xxxxxx is not supported Missing MMC registers in SFR view for MP13 berametal Some miss function in CubeIDE for MP13 baremetal (FreeRTOS) Fetch mp2 update site -Error found with Setup OpenSTLinux [G4][Zest] Update Stack values [G4 Zest] update the field Mcu.UserName for the Z parts to display the right name Check the errata under this link for more details. Where do I obtain STM32CubeIDE 1.16.1? For STM32CubeIDE 1.16.1: STM32Cu

I have developed the RTEdbg toolkit for lightweight C/C++ code instrumentation. I tested it on the STM32 since I have several demo boards - see the demo code in the RTEdbg Releases for a few of them. The data logging code runs fine. However, there are problems with the binary data transfer to the PC where the logged data is decoded - see below:1. It is possible to transfer the logged data to the PC in parallel to the debugger in the IDE if ST-LINK sharing is enabled using the ST-LINK command line utility. Such a solution is usable for post-mortem or snapshot data transfer, but not for streaming mode. It is also not very flexible.2. If the logged data is transferred using the RTEgdbData utility that used the GDB protocol, the execution of the embedded system code is immediately stopped as soon as the utility connects to the ST-LINK GDB server. There is a workaround for this issue. The programmer must start debugging until the main() function is reached, start the RTEgdbDa

I ran into the well known problem with libncurses.5. My distro doesn't supply this old version of libncurses. Instead my distro supplies arm-none-eabi tools linked against libncurses.6. I have two options: Try to install libncurses.5 from source. I think I might risk breaking my libncurses.6 installation on my computer. Thus I want to avoid that.Try to convince the IDE using the binaries supplied by my distro. I don't know how to do that. I went to the environment section in „Properties“ and removed the endless path within my homedirectory, but that doesn't impress the IDE, I still get the same error:Could not determine GDB version using command: /home/ariser/st/stm32cubeide_1.3.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.0.0.201904181610/tools/bin/arm-none-eabi-gdb --version /home/ariser/st/stm32cubeide_1.3.0/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.linux64_1.0.0.201904181610/tools/bin/arm-n

I want to create my own external loader for STM32U585. So I start with importing IS61WV51216BLL_STM3210E-EVAL (TrueStudio) to STM32CubeIDE. Tis works in principle, but when linking the project I get the error:update.win32_2.0.0.202105311346\tools\arm-none-eabi\bin\ld.exe: Loader/Dev_Inf.o:(.rodata+0x0): multiple definition of `StorageInfo'; ./Loader/Dev_Inf.o:(.rodata+0x0): first defined hereWhen I comment the line " KEEP(Loader/Dev_Inf.o ( .rodata ))" in stm32_flash.ld file everything compiles fine, but header with storage info is missing in elf file (*.stldr)

Hi all, I'trying to explore steval board with BlueNRG2 chip, I'm working on BLE_SensorDemo project, works nice, right now I wan to develop my owm file, so far I've developped a library for SPI flash.I've added my header in Inc folder et my source file in Src folder, so I can include my header but if I try to call my init function flash_init() declare in my header I got a fuc**** undefined reference to flash_init I really don't understand why wise studio is really really strange Why stm don't use STMCubeIde ? 

Dear CubeIDE team,I just started using CubeIDE.Following are my question.1. How can I find string text in .h file?    I tried to "ADC_OVR_DATA_OVERWRITTEN" string in Drivers\..\inc using "Ctrl+H" but I failed.    This is very uncomfortable to use. Now I am using ither search software due to this symptom.    (As I remember, this was very old issue. I hope you will guide me to solve this.)2. CubeIDE 1.13.0 memory usage is too big.   I think CubeIDE is using too much memory(more than 1.1GB) compared with IAR-IDE(about 450MB at 9.xx).  My labtop has 8GB ram. this is not that big ,but not that small. But when I opened CubeIDE, I can not open the other software due to lack of memory.Thanks in advance for your help.Best Regards,Kslim

How would I be able to create a binary for this project or run it through CubeIDE? For some context I have taken this project from the FP-AI-VISION1_V3.1.0 pack, made some modifications, and would like to flash my H747i board with it. I can build the CM4 and CM7 files but when it comes to running the entire project or creating a binary for it I am at a loss. Thank you!

I'd like to configure GCC to suppress warnings from library files - e.g. I don't want to see the -Wconversion warning in stm32f4xx.h, but I do want to see all warnings from source files that I write myself.  I'm using STM32CubeIDE v1.10.1 on Windows.I think a way to do this is adding a compiler flag to the MCU GCC Compiler->Miscellaneous->Other flags in project properties.  I've tried using the flags -isystem and -I, but haven't been able to suppress the warnings.Thoughts on how to suppress warnings from all source files inside specific folders?I'm aware of how to do this by adding #pragma to files I want to ignore warnings in, but I don't want to modify the library files.  I don't mind adding #pragma to custom source files if that's an option (i.e. globally disable warnings, selectively enable them in specific files), but I'd prefer to use compiler flags to ignore specific folders.

HiI am trying to use a Nucleo-F103 board with STM32CubeIDE (v1.16.1) on Windows 11.I have installed/uninstalled the IDE several times over the past few days but every time I get stopped at the beginning of the programming process (the code compiles OK).The message I have is "Launching : performing pre-launch check" and that's where it stops. I occasionally get a message "Termination of previous launch did not complete successfully" but that doesn't help much.I know the board works as I can program it on my personal computer (running Windows 11 and the same toolchain installed today) but I would like to use my work computer for this task.The code is generated by STM32CubeMX and is just a simple LED flasher to confirm the programming process.It feels like it should be a very simple fix but I can't work out what is missing.I have tried a lot of different settings in the configuration for debug and run but again, nothing has changed in the behaviour.It should work out of the box (as on my