STM32CubeProgrammer (MCUs)

Hi,I have executed the scripts to generate SFI on a Linux machine and I have successfully completed the process. Now, I want to run these scripts in a GitLab CI/CD pipeline to automate the process. However, when I try to execute the script, I get this error:$ ./GenerateSFI_OEM_Dev.shqt.qpa.xcb: could not connect to displaySegmentation fault (core dumped)Does anyone know how I can run these scripts in a GitLab CI/CD pipeline? For example, I want to execute this script:#!/bin/sh # Set to the default installation path of the Cube Programmer tool # If you installed it in another location, please update path tool_dir=~/STMicroelectronics/STM32Cube/STM32CubeProgrammer/bin/STM32TrustedPackageCreator_CLI key=../Keys/aeskey.bin nonce=../Keys/nonce.bin optbyte=$tool_dir/SFI_OB_CSV_FILES/SFI_OB_U5_2M.csv binary=../Binary/OEM_Dev.bin binary_base_add=0x08000000 sfi_out_file=../Binary/OEM_Dev.sfi sudo $tool_dir -sfi -fir $binary $binary_base_add -devid 0x482 -k $key -n $nonce -ob $optbyte -v 1 --ram

opens this window:whereas according to ST's website, current version is newer, 2.14.0:Can you please comment on this.Thanks,JW

I am programming USB DFU in stm32f407g disc1 but i am not able to connect it in stm32cubeprogrammer as it is showing usb port as usb1. Can anyone tell me is it anything missing?

Hello,There have been several similar threads but no answer from ST:https://community.st.com/t5/stm32cubeprogrammer-mcus/uninstall-stm32cubeprogrammer-ubuntu/td-p/335445https://community.st.com/t5/stm32cubeprogrammer-mcus/how-to-uninstall-stm32cubeprogrammer-2-11-0-on-ubuntu/td-p/66255https://community.st.com/t5/stm32cubeprogrammer-mcus/uninstall-stm32cubeprogrammer-ubuntu/td-p/335445It currenlty seems that the uninstaller is not working on Linux. Could we get an official response?

Instead of completing development of STM32CUBE Programmer - every one now need to follow some manual steps with unknown versions of firmware with many undefined startup addresses and even when all steps are completed with success - development board still not programmed properly - examples are not working!!!

OK so total noob here with a issue, I am trying to read from an esc/motor controller  through jtag ,problem lies in the fact  that iim using St link and bluepill  and there connected throigh  sclk sdio c9nnections.so my question is how and what to do to read and write to said controller  thanks in advance 

Hi,I'm developing a GUI invoking STM32TrustedPackageCreator_CLI tool to generate SFI encryption key file and nonce file, but I have no idea on the command syntax, does any one can help me? thanksLuke 

A write of size 294KB to STM32H7A3VGHx Internal Flash works, but a write of size 775KB does NOTBTW, same issue with STM32CubeProgrammer v2.16.0 

Hi,I have a project with an external loader. When programming using ST-LinkV2 (SWD) it works perfectly with CubeIDE or the STM32Programmer CLI.When trying programming the same ELF file using USB DFU connection, I get the following message, and the program exits:"c:\program files\STMicroelectronics\STM32Cube\STM32CubeProgrammer\bin\STM32_Programmer_CLI.exe" --connect port=usb1 --extload "C:\Repos\External Loader\N25Q128A_STM32F7.stldr" --download "Controller.elf" --skipErase -vb 3 ------------------------------------------------------------------- STM32CubeProgrammer v2.9.0 -------------------------------------------------------------------       Device Descriptor: |_bLength : 0x12 |_bDescriptorType : 0x01 |_bcdUSB : 0x0100 |_bDeviceClass : 0x00 |_bDeviceSubClass : 0x00 |_bDeviceProtocol : 0x00 |_bMaxPacketSize : 0x40 |_idVendor : 0x0483 |_idProduct : 0xdf11 |_bcdDevice : 0x2200 |_iManufacturer : 0x01 |_iProduct : 0x02 |_iSerialNumber : 0x03 |_bNumConfigu

good morning, i am using stm32h747i-disco board. for that when i am executing Touchgfx generated file into stm32cubeide. i am able to debug the m4 processor but not m7 processor. i am getting an error with " internal .elf file".then i did cm7 processor to off in stm32cubeprogrammer and executed the code. from then i am not able to debug the cm4 and cm7 processors, and i am not able connect the cube programmer. and yes i have upgraded the firmware. any help would be so appreciated. thank you in advance. 

Hey everyone!.I'm trying to use I2C protocol to transmit data from master to slave using i2c1 and i2c2 pins.But my rx buffer is not getting updated.I've gone through a couple of tutorials and I found out that in most of them they used two boards , so it got me thinking can we do it in a single board??? I'm new to stm32 can anyone help me??.

I managed to get the setup program to complete by running directly from the command line.The STM32CubeProgrammer app fails to run, giving the follow error trace:CubeProgrammer version: 2.15.0Path CubeProgrammer version: : /Applications/STMicroelectronics/STM32Cube/STM32CubeProgrammer/STM32CubeProgrammer.app/Contents/MacOs/bin/versionException in thread "JavaFX Application Thread" java.lang.RuntimeException: problems invoking getCaretShapeat org.fxmisc.richtext.TextFlowExt$GenericIceBreaker.invoke(TextFlowExt.java:230)at org.fxmisc.richtext.$Proxy6.getCaretShape(Unknown Source)at org.fxmisc.richtext.TextFlowExt.getCaretShape(TextFlowExt.java:84)at org.fxmisc.richtext.ParagraphText.updateSingleCaret(ParagraphText.java:327)at org.fxmisc.richtext.ParagraphText.lambda$new$3(ParagraphText.java:137)(... many more error lines)Thank you for any help getting this problem resolved.  

HelloFor my project I use a stm32g491rct6 with 256k flash. STM32CubeProgrammer 2.16.0 show the block contiguos 0-255 from 8000000 to 807ffff while STM32CubeProgrammer 2.17.0 show blocks 0-63 from 8000000 to 801ffff and 65280-65343 from 8040000 to 805ffff.Whats wrong?Thanks

Hi,I'm trying to create a wrapper for STM32CubeProgrammer_API.dll.The program crashes on trying to use the obDisplay API. I've tried using STM32CubeProgrammer_API.dll versions 2.10 and 2.15. Is there something I'm missing?Thank you very much.

Hi,I am new to stm products and am using the STM32F4 discovery. When I run ST-LinkUpgrade I am unable to click upgrade, although I can click "opening in upgrade mode". When I do this the board just disconnects. I have used the jar file for the upgrade software as well as the programmer, although the result is the same in both cases. I saw a similar support message from 3 years ago but it has not been answered. I have used the jar file for the upgrade software as well as the programmer, although the result is the same in both cases. Thanks

Hi,    We found STM32 programmer CLI report -15872 error in VSCode terminal, but same command works perfectly okay in regular terminal. Can you check what causes the issue? Here is the command we used in the terminal:  /Applications/STMicroelectronics/STM32Cube/STM32CubeProgrammer/STM32CubeProgrammer.app/Contents/MacOs/bin/STM32_Programmer_CLI -c port=SWD speed=fast per=e key=/Volumes/Work/workspace/Gen1-Product/Common/keys/key_1_root.pem cert=/Volumes/Work/workspace/Gen1-Product/Common/Certificates/cert_root.b64 pwd=/Volumes/Work/workspace/Gen1-Product/Common/Binary/password.bin debugauth=1 And the error message is (Note: the path is manually edited to remove sensitive info) ------------------------------------------------------------------- STM32CubeProgrammer v2.16.0 ------------------------------------------------------------------- Permission request submitted : e Key file path submitted : /Volumes/Work/workspace/Gen1-Product/Common/keys/k

Hi  Team@ST,1. I have a Nucleo 64 board.2. I connected Nucleo64 board to TileBox Pro via SWD and [TX+RX].3. Tried using STLINK in the STM32 Cube programmer option to program TileBox Pro and i get above error message.Can you please let me know what is the issue here. Thanks

Hello.We are creating an external loader with STM32H7A3LIH6Q microcontroller and FlashROM is MX25L51245G (64MB).The development environment is as followsCubeIDE : v1.9.0CubeProgrammer: v2.13.0Microcontroller :STM32H7A3LIH6QExternal FlashROM :X25L51245GXDI-08GCreate external loader for FlashROM with CubeIDE,I created a FlashROM external loader with CubeIDE and built it into CubeProgrammer(v2.13.0) to check the operation, However, I get an Error on Download.The following is the log when I run it with CubeProgrammer.10:33:18 : Memory Programming ...10:33:18 : Opening and parsing file: UpdateBinary_4kb.BIN10:33:18 : File : UpdateBinary_4kb.BIN10:33:18 : Size : 4.00 KB10:33:18 : Address : 0x9000000010:33:18 : Erasing memory corresponding to segment 0:10:33:19 : Erasing external memory sector 010:33:20 : Download in Progress:10:33:21 : Error: failed to download Segment[0]10:33:21 : Error: failed to download the FileAnd when 0x90000000 is read outI wrote 4KByte of binary data,I was able to co

Hello All,I have an STM32F407VET6 on a custom board. I am using a "magic word" stored at 0x2001C400 to persist through a system reset and drop into the bootloader.When I do this process while my ST-Link v2 is connected I can unplug the USB cable and plug it back in, open ST Cube Programmer, click on USB, and connect. The USB cable shows up in the device manager as STM32 BOOTLOADER. Everything's good.When I do this same process without the ST-Link being connected the USB shows up in the device manager as Unknown USB device and is not recognized in Cube Programmer.My ST-Link is connected using only PIN1 VAPP, PIN5 TDI tied to PIN6 GND, PIN7 TMS_SWDIO, and PIN9 TCK_SWCLK.What behavior is the ST-Link causing that I can reproduce in code as I switch to DFU through USB, and avoid needing the ST-Link connection?Thank you! 

I designed a custom PCB. It is designed to be used in a remote control car I want to make/to control a BLDC motor and servo wirelessly or through a potentiometer.When I attempt to program the microcontroller (connecting through STLINKV3) it seems to connect fine, and I am able to read the flash and option bytes. When I try to program a file, it fails with error "Error: failed to erase memory", except for one time where two blocks were written (see image) [the data is correct in the first but in the second only the 1 is correct].I have attempted in every combination of software/hardware/core reset in CubeProgrammer, and have read various other community posts, with no success. I'm not quite too sure where to go from here, whether it is a hardware issue or a software configuration issue.I have attached the Altium design files as well.Any suggestions would be appreciated. 

So i installed the st-link utility from my.st.com and did all the installation but when i run it, it tells me there are some .dll files missing. Specifically, these are the errors; 1st error; "The code execution cannot proceed because mfc140.dll was not found. Reinstalling the program may fix this problem" and the 2nd error is; "The code execution cannot proceed because MSVCP140.dll was not found. Reinstalling the program may fix this problem." . So i did exactly that, uninstalled the st-link utility and installed it again but still same problem. Does anyone have the same problem and how, if you fixed it, did you do it? 

Bonjour, je n'arrive à me connecter avec mon stm32 st link V2.J'ai réussi à flasher mon module en V2J45S7 STM8/STM32 Debugger.Mais quand je veux me connecter j'ai un message "Error: No STM32 target found! If your product embeds Debug Authentication, please perform a discovery using Debug Authentication"Je me dit que je dois de nouveau upgrader le module mais parfois j'ai un message "st-link is not in the dfu mode"J'ai essayé la mise à jour avec STSW-LINK007, cela a fonctionné mais je n'arrive toujours pas à me connecter.Que puis je faire ?Je reste disponible si vous avez des questions.Merci beaucoup--------------------------------------------------------------------------------------------------------------------------------------------------------In English :Hello, I can't connect with my stm32 st link V2.I managed to flash my module in V2J45S7 STM8/STM32 Debugger.But when I try to connect, I get an "Error: No STM32 target found! If your product embeds Debug Authentication, please per

Hello All, I am new to the STM32 platform and trying to learn.  I am working with a STM32F070F706 MCU.  I would like to use the MCU internal clock to support my peripherals  (I2C and USB 2.0).  The clock configuration tool cannot resolve the issue itself, so I modified the prescalers on my own and the issue seems (to me) to be gone. However,  if I select. "Resolve Clock Issues", STM32CubeIDE tells me it can't find a solution.  It will generate code for me, but warns me:  "- Main Config: These peripherals still have some not configured or wrong parameter values: [Clock]".  Does anyone see an issue with the clock configuration shown below?  To me, everything seems to be configured satisfactorily.  

I was updating CubeProg on MacOS 14.5 and had a few issues, but first IT WORKED. It let me know that administrative privilege is required (it isn't), but it plowed ahead and worked anyway.Here are the things that I ran into:It does this on 2.16 as well as 2.17, but if there is an update it says that it will install from a local repository (?) and continues successfully.Next:Here we see that we should choose "I ACCEPT" or "I DO NOT ACCEPT", but the only affordance is "I accept the terms in the license Agreement". Pedantic, but that's your normal audience.Finally when I try and connect using a J-Link, I get:I got this with 2.16.0 as well as 2.17.0. BTW, someone forgot to post the release notification for 2.17.0. Thanks,Andrei from The Great White North

Hi,I want to install an SFI on my microcontroller (NUCLEO-U575ZI-Q) using the following script:#!/bin/sh# Set to the default installation path of the Cube Programmer tool# If you installed it in another location, please update pathtool_dir=~/STMicroelectronics/STM32Cube/STM32CubeProgrammer/binmy_curr_dir=$(pwd)sfi_bin=$my_curr_dir/../Binary/OEM_Dev.sfirsse_bin=$tool_dir/RSSe/U5/enc_signed_RSSe_sfi_U5_2M.bincd $tool_dirsudo $tool_dir/STM32_Programmer_CLI -c port=SWD mode=HOTPLUG -sfi $sfi_bin hsm=1 slot=1 -rsse $rsse_bincd $my_curr_dir The thing is, when I do it through the interface, I select the HSM license I want to use: The question is: What would be the command/script to use the HSM license that I have generated (../Binary/MyLicense.bin)Best regards,