STM32CubeIDE (MCUs)

On https://st.com/en/development-tools/stm32cubeide.html the latest version (1.16.0) for STM32CubeIDE Generic Linux Installer i.e. STM32CubeIDE-Lnx no longer works.Where can I download this zip file alternatively or can someone provide me with this file? The both links to "Get latest" and to "1.16.0" are broken.Note: All other downloads work so far, older versions and other installers for Windows, Debian, Mac OS,...I only know, that specific file wasen.st-stm32cubeide_1.16.0_21983_20240628_1741_amd64.sh.zipwith checksum (SHA256):831522a542c162295336ea2ca93fc5793c2888e3a4f385b327b9dd88bc1bdd0fCan you confirm that this is no longer possible?73 Thomas

FreeRTOSConfig.h Core-Specific Issue in Core-Agnostic Library for STM32H755Description:I am developing a core-agnostic library for an STM32H755-based project, where the library will be linked into both the CM4 and CM7 projects. The library makes use of FreeRTOS, and I’m encountering an issue when including the `FreeRTOS.h` file in the library.Each core (CM4 and CM7) has its own `FreeRTOSConfig.h` file, which is specific to that core and is included by `FreeRTOS.h`. The problem arises because my library is being built independently and doesn’t know at build time which core it will be linked into.The `FreeRTOSConfig.h` file varies between the CM4 and CM7 cores, so when I include `FreeRTOS.h` in the library, there’s no clear way to handle the core-specific `FreeRTOSConfig.h` for each project. This creates a challenge because the library build cannot define core-specific information.My goal is to have a single version of the library that can be linked into both the CM4 and CM7 projects, wi

Hi, I'm trying to upload a blank code generated by the ioc file on STM32H7S3L8 and I'm getting this error: "Break at address "0x800efb8" with no debug information available, or outside of program code." How can this error be fixed?

Two small & easy to do improvement proposals for code generation in CubeMX & IDE:1. In the message about missing Cube firmware please include after "necessary firmware package" the exact package name with version, to avoid misunderstanding.2. If option "add necessary library files as reference" is selected - is it possible just to generate the project as if the package were present?Because no files will be copied. Just create the links/references where the library is assumed to be? User can get the library later.

Hi,are there some plugins, extensions of free linters that can be used with CubeIDE?If not, what are the best solutions?Thank you

I am new to STM IDE.I am using STM32 Cubemx with SIMCOM 7600C1. The code is in attachment.I dont know what is happening but throwing following error:Multiple errors reported. 1) Failed to execute MI command:-var-create - * rx_bufferError message from debugger back end:-var-create: unable to create variable object 2) Unable to create variable object 3) Failed to execute MI command:-data-evaluate-expression rx_bufferError message from debugger back end:No symbol "rx_buffer" in current context. 4) Failed to execute MI command:-var-create - * rx_bufferError message from debugger back end:-var-create: unable to create variable objectThese are the error coming after debugging

I am making an application using the STM32 drivers. Currently, I am using the following macro defined in the 'Device' drivers to distinguish the chip families: /** * @brief STM32 Family */ #if !defined (STM32F4) #define STM32F4 #endif /* STM32F4 */​ As we know, STM32F2/F4 and F7 have a different type of DMA implementation than STM32H5, leading to differences in elements in DMA_InitTypeDef and DMA_HandleTypeDef structures. Is there a macro that will help us distinguish these DMA types, rather than the chip family macro?

Hi everyone, I have question for a particular situation. Me and my collegue are working on the same project in STM32CubeIDE but something really strange is happening: On his laptop the project forlder and the .ioc file have a different name and everything is working correctly, If I try to do the same on my laptop I can't do it and if I try to open the .ioc file it says The thing is, my collegue is not doing this on purpose. Is there a way to generally make it work or is it just a bug?

Hello guys, I have a problem like this. How can I fix this problem

Good morning,we have a problem with ELF file loading. We are using an STM32U575 MCU on a Nucleo board.In particular:the location 0x0802A61B in the ELF file is set at 0x00 (we see it by open the ELF file with Cube Programmer).1) If we load the ELF file with Cube Programmer and read the memory again then we see that the location 0x0802A61B is correctly set to 0x00.2) But: If we load the ELF file with Cube Ide debugger and read the memory again with Cube Programmer then we see that the location 0x0802A61B is set to 0xFF.Issue is systematic: we found same problem on 3 different NUCLEO boards.Couly you explain this behaviour?Thank you in advance 

(originally a reply to https://community.st.com/t5/stm32cubeide-mcus/retarget-printf-on-stm32g070rbxx-cortex-m0/td-p/720883) Hi @Andrew Neil,For the scanf do we need to make any other change?My read function is-  int _read(int fd, char *ptr, int len){ (void)fd; int i; for(i=0;i<len;i++){ *ptr++ = uart_read(); } return len; }  In the terminal window it is not taking any keypress.

Hi,I have recently purchased a NUCLEO-L552ZE-Q and I am trying to program it using the STM32CUBEIDE but it will not program. I get the following in the console: Starting server with the following options: Persistent Mode : Disabled Logging Level : 1 Listen Port Number : 61234 Status Refresh Delay : 15s Verbose Mode : Disabled SWD Debug : Enabled InitWhile : Enabled Waiting for debugger connection... Debugger connected Waiting for debugger connection... Debugger connected Waiting for debugger connection... Shutting down... Exit. The microcontroller has to then be reset manually but it isn't programmed and the default led cycle program runs.Am I doing something wrong? I have had another nucleo board working just fine, the F767 I believe. Thanks

Hi, I just got my board STM32L552 and currently am setting up development environment for it. I'm testing the board with an example project 'CORTEXM_InterruptSwitch_TrustZone' and the code works well, however, I'm not able to set breakpoints for debugging. To be more specific, I can set breakpoints but the firmware doesn't stop at it. I've already checked through some ways to solve this issue like 'Checking Run --> Skip All Breakpoints' but that wasn't my case.  Could you please tell me what I'm missing? And please let me know if any screenshot is needed. Thank you in advance. Best regards,Tae Hyun Kim

Description:I am developing a library for an STM32H755-based project, where the library is responsible for controlling LEDs via `HAL_GPIO_WritePin()`. The library needs to be core-agnostic and should work when linked into both the CM4 and CM7 projects. However, I’m encountering an issue with the inclusion of the `stm32h755xx.h` header file. stm32h755xx.h is included by stm32h7xx.h when STM32H755xx is defined in stm32h7xx.h which is a requirement.The `stm32h755xx.h` file requires either the `CORE_CM4` or `CORE_CM7` preprocessor directive to be defined, as it contains core-specific definitions and includes (`core_cm4.h` or `core_cm7.h`). Since the library is being built independently, it does not know ahead of time whether it will be used in the CM4 or CM7 project. The core definition (`CORE_CM4` or `CORE_CM7`) is specified in the main project but is not known during the library build.My goal is to have a single library build that can be linked into both the CM4 and CM7 projects wit

Hello,I am trying to count how many clock cycles pieces of code take to run on my Nucleo board. I am using the following code for timing: start_cycles = DWT->CYCCNT; // dummy code end_cycles = DWT->CYCCNT; diff_cycles = end_cycles - start_cycles; printf("Num clocks: %u \n", diff_cycles); I am using different levels of optimization in the compiler settings and checking using live expressions (but also SWV to check what is printed to console). I had heard that debug mode can make things run slower due to a myriad of different factors. So I am wondering how I can, in the simplest way possible, run this code outside of debug mode and still have SWV or something enabled such that the clocks are printed to console. Pressing the run button starts debugging but disconnects and shuts down after successfully connecting, and going to run as > C/C++ application does the same.If anyone has any leads on this, it would be greatly appreciated. Thank you.

Hi all.I'm working with the F767ZI Nucleo today, specifically trying to compile and evaluate an example in the F7 Firmware repository: C:\**\STM32Cube\Repository\STM32Cube_FW_F7_V1.17.2\Projects\STM32F767ZI-Nucleo\Applications\LwIP\LwIP_HTTP_Server_Netconn_RTOS.After the required conversion to enable it to compile in CubeIDE, everything thereafter was absolutely fine, although I was aware of some on-screen information relating to backing-up of the original source code files. I didn't take too much notice of it and perhaps I should have.The project compiled with zero errors and zero warnings.  Flashing the board was also sucessful.  The project runs as expected, displaying the demo webpage from the assigned IP address.However.  I decided to copy the original project to another directory on another drive so I could take a deeper dive into the code and now, both the original Repository copy and the copied project have errors:    Error: Program "make" not

The target device 'STM32U073RBTx' is currently not supported by STM32CubeIDE 

Hi,I'm trying retarget printf. My uart_write function is working correctly and i'm able to see character on Teraterm.But when i try to use printf it is not working. i even tried semihosting to execute printf but it fails. i'm attaching the screenshots -Disassembly of the code stucks at "bkpt 0x00ab" -any solution for this problem? 

I have a project using the STM32L031.  It's fairly simple and doesn't require DMA, probably doesn't even need interrupt processing (polling should be fine for what little UART traffic is planned). Is there a way to configure the project in STM32CubeIDE / CubeMX to not have HAL_DMA_MODULE_ENABLED active in the stm32l0xx_hal_conf.h file?  Just commenting it out causes a lot of breakage in the rest of the HAL libraries.   I am using UART, SPI, and I2C interfaces.  I would rather use the Flash space for text-based error messages than DMA code I will never call but I don't want to hack up the HAL library if there is a "proper" way to disable the DMA related code. I currently have 22kB of the 32kB in the part used but the HAL library is probably about 16kB of that.  I am not using a real-time supervisor (no FreeRTOS or ThreadX), just bare metal but with the HAL library.

Hi, I'm having trouble when debugging the STM32 project. The board was connected to my laptop, however, on the IDE I can not find the option to debug on the target board. I bought this board a month ago and debugged it only a few times before.Please help me to solve this problem, thank you very much. 

Hello,Currently I am working with a view like this: and I was wondering if there was any way for me to change the view into something like this:or is the view something that is varies based on the different chips?I don't know why but the view that I am working with is very irritating to me, so if possible I would prefer to work with something that looks like the second picture.

STM32CubeIDE 1.16.0 was released today on st.com as well as an in-tool update patch. What is new in 1.16.0? Microcontroller and board lists aligned with STM32CubeMX v6.12.0 : STM32C0, STM32WB0 and STM32MP25XX Added CMake support for multicontext projects (Multi-Context ,Trust zone , Multi-core) Added new features for CMake project configuration Basic CMake support now also with Ninja Added the OZ in the optimization level to the build settings Main fixed issues: Refer to the STM32 microcontrollers wiki under this link. Known issues fixed and problems and limitations: Refer to the STM32 microcontrollers wiki under this link. Where do I obtain STM32CubeIDE 1.16.0? https://www.st.com/stm32cubeide … Or update your current installation of STM32CubeIDE using: Help > Check for updates

Hello,I have an older project that I am trying to move forward. The original design was done with the STM32F401(RE) using System Workbench. The new design is planned to be using the STM32F446(RE) using STM32Cube IDE (v1.16). I planned on using the internal 16 MHz clock through the PLL.  I am using USB in this design and need a 48 MHz clock.Here is the code that I was using with the STM32F401. #if USE_INTERNAL_16MHZ /**Initializes the CPU, AHB and APB busses clocks */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; RCC_OscInitStruct.HSIState = RCC_HSI_ON; RCC_OscInitStruct.HSICalibrationValue = 16; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; RCC_OscInitStruct.PLL.PLLM = 16; RCC_OscInitStruct.PLL.PLLN = 336; RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; RCC_OscInitStruct.PLL.PLLQ = 7; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { Error_Handler(); } /**Initializes the C

Greetings, I have been trying to download STM32cube ide from the ST website however it responds with " This software is not available for download." and the ide does not download. I have downloaded the same ide many times using the same method however I have been facing this issue from last month.I hope people from ST will help.Thanks. 

We have a more than 10 years old STM32F100 project which was built by AC6, I try to use TruStudio and STM32CubeIDE 1.6.1 to import , and build it, but all fails on Error "Program "make" not found in path". How to fix it?