AutoDevKit Ecosystem

Hello! I want to ask in this routine! I read it This application shows how to the use the WKUP driver. In particular, the WKPUis configured to wake up the core and generate an interrupt on a falling-edgeof the source INT28. This source is connected to the push button SW_1. After toconfigure the WKPU, the application toggles the LED_1 and the LED_2 for 1,5seconds, then will move the core in STOP0 mode. Now, if the SW_1 is pushed, thefollowing events will occur:1. The core will wake up and will return in RUN mode, and LED_1 and LED_2 willstart to blink again.2. An interrupt will occur. The related callback function will switch-on theLED_3. But I still don't understand that button SW_1 is not used in the pinmap editor ! How does it wake up the CPU and make the LED work!

Hello! Can you send me a data package ST Automotive Processors Startup Package 202401 V3?I am using the SPC58 controller! So I really hope to receive such valuable information! Thank you!

Hi Guys, We want to build a complete hardware setup with a SPC58EC-DISP board, AEKPOW-100W4V1, and AEK-USB-TYPEC1 and want to show USB-PD functionality with fixed and programmable output. 1. The first issue we face is AEK-USB-TYPEC1 giving only default 5 V output and other output voltages we are not getting. We are unable to know whether the software for the USB PD application is preloaded in the SPC58 microcontroller? 2. We are unable to find the resource related to SPC5-UDESTK-SW USB/JTAG debugger software, hence unable to run the UDE application.  Looking for a suggestion?  What are the software required to build and monitor USB-PD applications?      

Dear friends,FreeRTOS are supporting SMP functionalities that enables to run FreeRTOS Kernel in only one core and schedule tasks on multiple cores.https://www.freertos.org/symmetric-multiprocessing-introduction.html I am trying to use it, but it looks like the SPC5 FreeRTOS Component does not have the FreeRTOS SMP API.Please, someone already used the FreeRTOS SMP functionality?How to update the SPC5 FreeRTOS Component to the latest FreeRTOS release?Best regards.

hear i used the two wave files. but hear the logic is 2 wav files at continues memory location but I want  different location wave files to play using the  code logic.

Hi Community ,We are working on AVAS project Autodevkit AEK-AUD-C1D9031 and trying to execute two wave files for two different channels.But only one wave file is getting executed which is getStartWavFile(0) when tried to give non zero parameter ,wave sound is not coming e.g. getStartWavFile(1).Below is the snippet base code and modified code to access both wave files: 1.Two wave files added inside source -->audio files 2. Two wave files location has been added inside sounddb.s   

I debug up to hear and the flow of the code is blocked in this function,(after adding freeRTOS) in  the project. i don't know what is the error. i had used the low level API which is avaliable in the document. the flow is like this in the main function. at AEK_903D_Init(). it is blocked. and not coming out of that API. please help me out.

Hi everyone,I am using SPC58 MCU and Autodevkit IDE. In that I have taken Avas_Compact_Test_Application example as the base source code1. And, During execution, before integration of FreeRtos the execution was entering osalThreadDelayMilliseconds()      and coming out of it and executing further code, but after integration of FreeRtos, the execution is entering                osalThreadDelayMilliseconds() but not coming out of that API and further code is not getting executed. I have            not modified anything in the base source code expect integration of FreeRtos even though I'm facing this                  problem. Can anyone help me to come out this problem. 2. If I run base code it is working fine and if I just import FreeRtos Components without any modifications in source      code then it is building through but getting "NACK_

Dear Community Members,I was exploring AEK-COM-ISOSPI1, SPI to isoSPI dongle, based on L9963T transceiver for one of my new project. I wanted to make use of this interface product for a simulating software that runs on a Teensy 4.0 microcontroller. I have verified that the SPI data is received to the board, but unfortunately no signal was available on the isoSPI end. The setup and scenario is as below:Teensy 4.0 (at 2MHz, SPI Mode0) acts as Master and I need this board to be on slave mode. Hence, I kept the jumper NSLAVE at JP1=0. The signals at SCK (TP6), SDI (TP7) and NCS (TP8) looks good as expected which was sent from the Teensy microcontroller. VDD and VIO was set to 5V. The other jumper connections are not quite clear to me however I tried few combinations and none of them seems to give me the isoSPI signals. For example, I tried TXAmp =0, TXEN =1, ISOFreq=1, BNE=0 and DIS=0 (JP2-JP6 respectively). I have also measured the signals at the L9963T pins input and all looks good. It s

In the AutoDevKit,I can't find the demo of AEK-MOT-WINH92 to drive a motor,so where can i find?

We have integrated FREERTOS in the project and checked the communication but getting TXERROR.CAN Driver itself is not getting initialized.

Hello everyone,I'm currently working with the AEK-AUD-C1D9031 development board and utilizing the "AVAS Compact 2.0 - Test Application" example code from AutoDevKitStudio2.2.1. I'm seeking assistance in extending this example code with FreeRTOS. However, upon including FreeRTOS_RLA, I'm encountering issues with CAN communication. During debugging, I noticed that the flow gets stuck at osalThreadDelayMilliseconds(500). Could anyone offer guidance on resolving this issue? Any help would be greatly appreciated. Thank you.  Here integrated the freeRTOS into project.Added Break point.4 break points addedIt is hitting 1,3,2 break pointsit is hitting osalThreadDelayMilliseconds(500);(2 break point)heat the program is stopped.

Hello ST Microcontroller Forum Community,I hope this message finds you well. With the invaluable assistance of this community, I’ve been able to successfully write a simple GPIO code to blink the LED on my AEK-MCU-C1MLIT1 board. I’m grateful for the support, as it has significantly boosted my confidence in handling GPIO operations.Currently, I have the LED_4, LED_3, and LED_5 toggling as desired. However, I’m now seeking guidance on integrating a user switch/button with the existing code. Specifically, I aim to initiate the LED toggling sequence when the button is pressed.If anyone could provide assistance in integrating the button with the code and share the necessary PinEditor configuration for the button, it would be immensely appreciated. Additionally, any accompanying code snippets or instructions would be incredibly helpful.Thank you in advance for your support and expertise.Best regards,Ali

Hello, I tried to use openOCD with my custom board based on SPC58EG80E5. I can successfully flash the ELF file of my project with SPC5LNKA debugger, but the debug features such as the watch window and breakpoints do not work. How can I enable these features?

The connections in the picture is ok or should, I want to change any thing.(note: is it necessary to connect GND to the DB9 connector).

Hi,Today I've been working on software on the SPC560P discovery board and found that my board got struck at a specific line of the code, and when I tried with other code, the results were the same.Code struck in this specific line: * Waits for the mode switch or an error condition. *  while (ME.IS.R == 0U){   ; Please help me to fix it. Thanks in advance.

Hello Concern, We are considering the L9637D in one of our program as we are checking for LO pin functionality.As there is very limited details in the datasheet.   Regards,Shubham 

Dear community members,Because I am using the stm32 Nucleo board with st32cubemx and stm32cubeprogrammer, how can I get the library and set all the parameters of the AEK-COM-ISOSPI1 so that it can communicate with the AEK-POW-BMS63EN. Any help would be very much appreciated. Thanks,TH.

Dear Members. The current BMS board design has not taken in consideration all the recommendation for a Hot Plug capable design. To make your system hot-plug resistant make sure to follow the recommendations below: Change the battery connector with a hot plug capable one AGND and DGND grounds shall be connected to the internal node (i.e. GND of the chip) through the drain of the MHOT FET. GND_ESD and PACK_GND  grounds shall be connected to the negative terminal of the battery pack All big capacitors on the VBAT line shall be tied to the GND_ESD ground. Keep improving your designs! ;) Best Regards, AutoDevKit Team

We are releasing the first beta version of the BMS GUI for the AutoDevKit solution! :flexed_biceps:Get the online update Version 2.3.1 for your AutoDevKit Studio now! 8)Have a look at slides 4, 18, 19, 20, and 22 for details.                             Let us know what you think! Stay tuned! AutoDevKit Team

To all community members, We are pleased to announce that we have created support for OpenOCD, a new programmer / debugger for SPC58x microcontrollers. The software is license free and you do not have any code size limitations! 8)The new dongle AEK-MCU-SPC5LNK is already available in stores!Within 2024, the dongle will be extended to SPC56x microcontrollers.Go check it now! Best Regards. AutoDevKit Team

Hi,I would like to check if STM AEK-POW-BMS63EN board can be used as a first board in the daisy chain with the setup where we have external MCU (for example STMF103RB) and AEK-COM-ISOSPI1?In the datasheet you describe difference between 'Master' and 'Slave' in the following way:and all your AEK-POW-BMS63EN comes with SPEIN pin pull-down via R20: Can you please clarify if the usage of AEK-POW-BMS63EN in the single BMS setup with external MCU is even possible?BR,MaraLo

Dear community members, In the AEK-POW-SPSB081 board, the SPI pin labels (red box in the below image) are not matching the labels of the test points. The correct labels are those placed on the test points (green box).   Thank you for your contributions. Best Regards, AutoDevKit Team  

"Hi,We are building hardware with the SPC58EG80E5 MCU. For debugging purposes, we plan to use the UDESTK-EVAL kit. However, on the product page, it states that it is "not recommended for new designs." What alternative options can we consider?"

Hi, I am using L9663, can you send me a driver code? Or a schematic diagram of the wiring