STM32 MPUs Software development tools

I updated from Ecosystem v6.0.0 to Ecosystem v6.1.0. I have a project that I started from an ioc for the STM32MP157f-dk2 board. The A7 projects all compiled fine. After updating, I changed the SDK root to:`EcoSystem/STM32MPU-Ecosystem-v6.1.0/Developer-Package/SDK` ad I'm getting this error when trying to compile and of the CA7 projects:09:09:49 **** Build of configuration Default for project FDCAN1-M4_CA7_linux-6.6.48 **** make all Wrapper for /opt/st/stm32cubeide_1.18.1/plugins/com.st.stm32cube.ide.mpu.linux.toolchain_2.2.0.202409171043/tools/bin/make FIP_DEPLOYDIR_ROOT: /home/smanger/github/workspace/FDCAN1-M4/CA7/linux/build/../../FIP_artifacts + case "$command" in + exec make all Makefile:2: /home/smanger/DevBoard/A7/STM32MPU-Ecosystem-v6.0.0/Developer-Package/stm32mp1-openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06/sources/arm-ostl-linux-gnueabi/linux-stm32mp-6.6.48-stm32mp-r1-r0/linux-6.6.48/Makefile: No such file or directory make: *** No rule to make target '/home/smanger/DevBoa

I've upgrade an ioc based project for the STM32MP157F-DK2 from CubeIDE 1.18 to 1.19 and from Ecosystem 6.0.0 to 6.1.0.I set the SDKROOT correctly. And then `Setup OpenSTLinux` from the IDE. Then I `Import and OpenSTLinux` project. All of that I was successful. I used the command and the SDK to build the `Modify, rebuild and reload the Linux® kernel` and copied over the new OS to the DevBoard as directed in The WikI Webpage.I can not build any of the build targets. The all give this error:My Linux project structure is as follows:and the build directory contains a link to itself:Here is my `ostl-linux` directory:  

Hi All, can any one tell me what is the Maximum Speed of toggling GPIO on userspace and the kernel space.I was trying with kernel module programming with IOREMAP API i got 35 Nano seconds. but my requirement is maximum 8 Nano second, can any one please let me know is there any possibility. toggling GPIO at 8 nano second.  

I upgraded to the new development release. I can not create a OpenSTLinux project for my ioc file. I am working with the st32mp157f-dk2 and have installed the new v6.1.0 ecosystem. I have upograde rhw STM32CubeiDE TO V1.19.0.I set the SDK Root. an loaded the plugins. I have been able to create a user space and trusted applications. However, I can not get the OpenSTLinux project to load.  The pictures on the webpages all have broken links:https://wiki.st.com/stm32mpu/wiki/How_to_manage_OpenSTLinux_projects_in_STM32CubeIDE#:~:text=From%20STM32CubeIDE%20v1.,to%20make%20project%20usage%20easier I don't know what I am not doing correctly.

I am working on STM32MP257F. I read the Artical "How to perform Secure Boot from Distribution Package". It doesn't seem to mention Sign or Sign & Encrypt FIP ​​Binary manually. In my case it is necessary to Sign/Sign & Encrypted FIP binary manually and do it outside of Yocto. This is done only with 1 specific person and does not expose the private key.Please give me an example to Sign/Sign & Encrypt FIP ​​binary manually using STM32_SigningTool_CLI.Thanks.

I created an STM project of the STM32MP157f-dk2 in eclipse.I've tried to build the entire A7 core linux code. How do I replace what's on the dk2 now? The dk2 just has the starter package on it.

I am working on STM32 Trusted Package Creator. I read the artical How to deploy SSP using a step-by-step approach at section "3.1.2.2. Secret file content for STM32MP2 series". I need to create a secret file that contain FIP-EDMK OTP as the image below:Could you please explain on Enc/Wrap box.When should I select No Encryption?When should I select Wrapping?When should I select Encryption? For the FIP-EDMK What should I select? 

We are pleased to announce that the release 1.19.0 of STM32CubeIDE is available. What is new in 1.19.0: Microcontroller, microprocessor, and board lists aligned with STM32CubeMX v6.15.0: Added the support for STM32MP21xx microprocessors to the STM32MP2 series and extended the support for boards based on the STM32MP2 microprocessors Added the support for STM32WL30xx and STM32WL31xx microcontrollers to the STM32WL3x line Added automatic external memory loader prefilling in debug configuration for boards based on the STM32N6 series Added the support for OpenSTLinux 6.1.0 through the update site mechanism Added the support for STM32MP2x-M33-TD projects generated from STM32CubeMX standalone Added the Cortex®-A35 support in the SFRs view Added the capability to install OpenSTLinux through the update site mechanism on empty projects for STM32MP1 and STM32MP2 devices Added the support for TF‑M projects debugging for STM32MP2x-M33-TD Added the new view Flash memories programming allowing the

I'm following this guide https://wiki.st.com/stm32mpu/wiki/STM32MPU_Developer_Package and I'm stuck at 5.2.3. Building and deploying the Linux kernel for the first time. I followed all ST recommendations for directories names and structures, so everything is exactly how they say. Following this README: https://github.com/STMicroelectronics/meta-st-stm32mp/blob/scarthgap/recipes-kernel/linux/linux-stm32mp/README.HOW_TO.txt, I'm stuck at 6.2 Compile External Device tree. When executing this make command with stm32mp257f-ev1-ca35tdcid-ostl.dtb as name of external devicetree:make ${IMAGE_KERNEL} O="${OUTPUT_BUILD_DIR}" KBUILD_EXTDTS="${EXTDT_DIR}/linux" <name of external devicetree .dtb> I get these errors:make[1]: Entering directory '/home/vboxuser/STM32MPU-Dev/Developer-Package/stm32mp2-openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06/sources/aarch64-ostl-linux/linux-stm32mp-6.6.48-stm32mp-r1-r0/build' GEN Makefile CALL /home/vboxuse

We are pleased to announce that STM32CubeProgrammer 2.20 is available What is new in 2.20: • Support for the STM32MP21x microprocessors:         – External memory programming        – OTP programming        – PKCS#11        – ST power management IC• Support for MCE Noekeon encryption for STM32N6 series microcontrollers• Extended PMIC support to more components• Support of the Secure Manager on external flash memory for STM32H573xx microcontrollers• Recovery button for STM32H5 series microcontrollers• Support for Chinese and Japanese languages• Support for incremental programming for STM32WB5xxx/35xx and STM32G0B0xx/B1xx/C1xxmicrocontrollers• Support for macOS® on Apple® silicon Main fixed issues in 2.20: Refer to the STM32CubeProgrammer wiki at: STM32CubeProgrammer errata 2.20.x - stm32mcu Known problems and limitations in 2.20: Refer to the STM32CubeProgrammer wiki at: STM32CubeProgrammer errata

Dear ST Developer Support,I download the STM32MP2 android 13 images from https://www.st.com/en/embedded-software/stm32mp2droidsta.html#get-software .When I flash the st-android-13.0.0-2024-07-31-stm32mp257f-ev1-emmc-starter images by using STM32CubeProgrammer v2.19 for windows, I would fail on flashing super.img phase.The error message show "Error while reading the file".Would you help me solve this problem. Thanks. I attached the fail logs11:40:58 : STM32CubeProgrammer API v2.19.0 | Windows-64Bits11:41:07 : UR connection mode is defined with the HWrst reset mode11:41:07 : USB speed : High Speed (480MBit/s)11:41:07 : Manuf. ID : STMicroelectronics11:41:07 : Product ID : DFU in HS Mode @Device ID /0x505, @Revision ID /0x200011:41:07 : SN : 002F00414136500B0037365311:41:07 : DFU protocol: 1.111:41:07 : Board : --11:41:07 : Device ID : 0x050511:41:11 : Read TSV File: D:\Project\STM\STM32MP257F\Android-13\en.st-android-13.0.0-2024-07-31-stm32mp257f-ev1-emmc-starter\st-a

Hello,MPU: STM32MP13xxI have a basic que regarding OTP words which are not free for user to use. We are using SSP and for that we need to generate a secret file as per documentation.We want to write OTP values like 3 and 18 but we get this error message in GUI. ex. OTP_WORD_3=0x185b5a00. QUE:- Is it possible to consider OTP 3 during generation of secret file?if NO, what is the other alternative? is the Flasing of OTP via ST Cube Programmer is the only way?(with the goal in mind that we do not want to include more steps in the production scenario) REF:I have already gone through many ST Docs like below-  - https://www.st.com/resource/en/user_manual/um2238-stm32-trusted-package-creator-tool-software-description-stmicroelectronics.pdf- https://wiki.st.com/stm32mpu/wiki/STM32CubeProgrammer#How_to_fuse_OTP- https://wiki.st.com/stm32mpu/wiki/STM32CubeProgrammer_OTP_management  

Hi AllThis has been reported in various forms since 2019:https://community.st.com/t5/stm32-mpus-products-and-hardware/freertos-does-not-run-on-stm32mp1-m4-core/m-p/302468andhttps://community.st.com/t5/stm32-mpus-embedded-software-and/hal-tick-does-not-get-incremented-on-second-debug-session-after/m-p/259405and apparently it was flagged as solved.Yes it was solved in "OpenAMP_FreeRTOS_echo" project but it was never solved in STM32CubeMX code generation for STM32MP M4 processor.Fault was in code that would enable TIMx interrupt before TIMx was initialized so it instance was NULL.Code generated by CubeMX version 6.14.1 and "STM32Cube_FW_MP1_V1.6.0" firmware still generates the same code that ebnables TIMx before TIMx.Instance is set to any value:TIMx IRQ is raised somewhere before TIMx.Instance is set and that causes IRQ service routine to disable TIMx IRQ.We've fixed that by comparing code "OpenAMP_FreeRTOS_echo" in and STM32CubeMX generated code.There enabling of TIMx IRQ was moved furt

Hi,I try to compile "OpenAMP_TTY_echo_CM33_NonSecure" sample program as suggested here:https://wiki.st.com/stm32mpu/wiki/Getting_started/STM32MP2_boards/STM32MP257x-DK/Develop_on_Arm_Cortex-M33/Modify,_rebuild_and_reload_the_firmwareCompiling does not work, I get error message: 0:43:14 **** Build of configuration CA35TDCID_m33_ns_sign for project OpenAMP_TTY_echo_CM33_NonSecure ****make -j16 all cmake -S ../../../../../../../../../Middlewares/Third_Party/OpenAMP/libmetal/ -B libmetal -G"Unix Makefiles" -DCMAKE_TOOLCHAIN_FILE=cmake/platforms/stm32mp-generic-gcc.cmakeCMake Error at CMakeLists.txt:1 (cmake_minimum_required):-- Configuring incomplete, errors occurred!Compatibility with CMake < 3.5 has been removed from CMake. Update the VERSION argument <min> value. Or, use the <min>...<max> syntaxto tell CMake that the project requires at least <min> but has been updatedto work with policies introduced by <max> or earlier. Or, add -DCMAKE_PO

Dear Sir/Mam We are encountering an issue with writing values into channels 0–7 of the RCC_XBARxCFGR register at the address offset 0x1018 + 0x4 * x (where x = 0 to 63).We have also observed that Writing to other channels (x = 8 to 63) works as expected and Attempts to write into RCC_XBARxCFGR(0 to 7) result in the debug control exiting and generating an error. Thanks & RegardsAkshitha Pattem

Moved from this thread. Hello @mƎALLEm  I'm facing this issue on CubeMX 6.14.1. Project for STM32MP157FACx (STM32MP1 series package) v 1.7.0.  

Is there a way to backup partitions or the whole contents to a file so that  it can be restored later on ? For example:any idea ? It is only a programmer then ? :)  

I want to use a different SD Card than the one provided with the STM32MP257DK board. I complete writing to the SD Card through STM32CubeProgrammer in boot mode, but STM32CubeProgrammer disappears without the last complete message.After that, booting does not work even if I do SD boot, and the SD Card is not partitioned.Are there any separate regulations for the SD Card that should be used with the STM32MP257DK board? INFO: Boot used partition fsbl1NOTICE: BL2: v2.10-stm32mp2-r1.0(debug):lts-v2.10.5-dirty(7c229848)NOTICE: BL2: Built : 16:19:31, Jun 28 2024INFO: EventBuffer0: BuffArea=e03f000 DmaAddr=0e03f000 CoherentMapAddr=0xe03f000INFO: dwc3_set_dev_speed = HighSpeedINFO: DFU USB START...INFO: Event: Link Status Change : ON(0)INFO: Event: Link Status Change : Early Suspend(5)INFO: Event: Link Status Change : L2(3)INFO: Event: SuspendINFO: USB Suspend modeINFO: Event: Device ResetINFO: Event: Device Connection DoneINFO: dwc3_get_dev_speed = HighSpeedINFO: Event: Link Status Change

Hello,I'm trying to debug firmware code for M33 in NS mode. The board is running openSTLinux6.6 BSP in opteemin mode. M33 is running at 400MHz by setting in optee DT: FLEXGEN_CFG(0, XBAR_SRC_PLL4, 0, 2) and by running in firmware:HAL_Init(); SystemCoreClockUpdate(); I used two application to test:The first one is very simple and do a GPIO (configure in output mode) set and resetLL_GPIO_SetOutputPin( (GPIO_TypeDef *) GPIOD, LL_GPIO_PIN_1 ); LL_GPIO_ResetOutputPin( (GPIO_TypeDef *) GPIOD, LL_GPIO_PIN_1 );but when I used an analyzer to watch the GPIO signal, I got a time of 1,7us for set/reset that It seems to me to slow for running at 400MHz (as you can see from the first attached image).The second application is designed to exchange data with an A35 application using two piece of shared memory and IPCC. It's a simple loopback test where M33 copy data (from 0 to 1024 bytes) to first shared memory and signal data's ready through IPCC to A35, A35 receive the data a

Hello We are currently working on LPDDR4 configuration using the STM32MP257F-DK board. While analysing the setup, we observed that in the stm32mp25-mx.dtsi file, which was generated from STM32CubeMX, certain registers appear to be missing when cross-referenced with the rm0457-stm32mp2325xx-advanced-arm-based-32-64bit-MPUs reference manual.Additionally, we noticed that these registers are being utilized in the ARM-Trusted-Firmware. However, the addresses of the missing registers fall within the reserved space as per the reference manual.We have attached a file detailing the specific registers we found missing from the reference manual. Could you kindly verify and provide guidance on where these registers are defined and how we should configure their values? Thanks & regardsAkshitha Pattem  

Hello,   How could STM32MP257-EV1 in DFU mode,    I have followed the steps of STM32MP25 Evaluation boards - Starter Package for Android - stm32mpu,1. install SetupSTM32CubeProgrammer_win64.exe2. Run the “STM32 Bootloader.bat”3. Set the boot switches to the off position (boot from UART/USB).4. Connect the USB type-C (OTG) port (4) to the host PC that contains the downloaded image.5. Insert the delivered microSD card into the dedicated slot (5).6. Connect the USB type-C (power supply) port (1) to the power connector or a host PC, and check the power jumper position.7. Press the reset button (7) to reset the board.but when I check device manager, nothing new shows up at all.attached the picture of STM32MP257-EV1 powered on     

Hello, Im trying to follow the ST getting started guide for my STM32MP157F-DK2, currently at this part: https://wiki.st.com/stm32mpu/wiki/Getting_started/STM32MP1_boards/STM32MP157x-DK2/Develop_on_Arm%C2%AE_Cortex%C2%AE-A7/Modify,_rebuild_and_reload_the_Linux%C2%AE_kernelSo, I followed every instruction, but I just cant find the BSP file mentioned, the en.SOURCES-stm32mp1-openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06.tar.gzI have ofcourse followed the link provided, but it leads me to this: https://www.st.com/en/embedded-software/stm32mp1dev.html#get-softwarewhich is the same address from which I downloaded the SDK in a previous section of the guide. I have looked for this file in the SDK, and in the Distribution package I later cloned from git. I can not find it, and I dont know how to continue with the guide. My knowlegde about Linux and mainly Yocto is limited, and I am mainly going through this to learn. I would love to discover my mistake is a silly one, but cu

Dear ST team,We have verified the following issues on the STM32MP257-EV1 platform, following the official guidance:https://wiki.st.com/stm32mpu/wiki/Getting_started/STM32MP2_boards/STM32MP257x-DK/Develop_on_Arm_Cortex-M33While creating a new project using STM32CubeIDE for the MP2 series, we encountered several issues and inconsistencies:1. OpenAMP code generation failureWhen enabling OpenAMP middleware via STM32CubeIDE, the tool does not generate the expected or necessary source files correctly, resulting in incomplete or non-functional projects.2. Unexpected resource_table requirementEven when creating a default Cortex-M33 project (non-secure) with minimal settings, the build process seems to expect a resource_table, which is typically associated with Linux-side communication. However, the generated ELF and source files are not intended for OpenAMP communication, causing confusion.3. Project structure mismatchThe automatically generated project structure from STM32CubeIDE differs sign

Hello,I’m unable to create a new project for the STM32MP2 (STM32MP251CAL3) in STM32CubeMX (Version 6.14.1). After selecting the MPU and clicking Start Project, I choose the TrustZone feature—but nothing happens. I can see a “*” appear next to “Untitled” in the top left, but no further dialog appears.When I try to select an MCU, I receive the warning:“Project Untitled has been modified would you like to save the projekt?”If I click Yes, the mouse cursor turns into the blue loading spinner and nothing else happens.In the Output window, I see: Creating: STM32MP251CALx Initializing: STM32MP251CALx Environment: STM32CubeMX  Even when editing an existing project, I can click options in Pinout & Configuration, but the cursor just shows the blue loading spinner and nothing else occurs.Could you please help me resolve this?

Had a working yocto build of st-image-weston for a custom machine based on 157-DK2, then I followed the simple instructions for update from openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 to 6.0.3 (v25.04.30)  -- just a new repo manifest tag...https://wiki.st.com/stm32mpu/wiki/STM32_MPU_OpenSTLinux_release_note#v6-0-3repo sync ran without errorsbut now `bitbake st-image-weston` fails: ERROR: Nothing RPROVIDES 'linux-firmware-bluetooth-bcm43xx' (but /home/aescape/Documents/projects/pensa/evon/code/dist-package/layers/openembedded-core/meta/recipes-core/packagegroups/packagegroup-base.bb RDEPENDS on or otherwise requires it) NOTE: Runtime target 'linux-firmware-bluetooth-bcm43xx' is unbuildable, removing... Missing or unbuildable dependency chain was: ['linux-firmware-bluetooth-bcm43xx'] NOTE: Runtime target 'packagegroup-base-extended' is unbuildable, removing... Missing or unbuildable dependency chain was: ['packagegroup-base-extended', 'linux-firmware-bluetooth-bcm43xx']