Feedback forum

Dear Customer, We are unable to post invoices to your site my.st.com/stparc because indicates an error message:  "Application ErrorYour request cannot be processed due an internal application error. Please contact the technical support.We apologize for the inconvenience."  

This morning:Is it intended that the 'STM32CubeMX 6.13.0 code generation issue for STM32CubeIDE toolchain on macOS is fixed' post is listed twice?

This is what I see when writing a new message in the community (or creating a new post). Notice the </> option to insert code snippet.   However, en clicking on the `...` option to expand it, the </> is gone, and I can not find a way to collapse the options to what it was before.   It would be nice to have this fixed. Many thanks.

Hello! I was wondering if anybody has successfully called into the Singapore Sales Office and Representative at +65 6216 5000. I have called multiple times, nearly more than 10 times already, the phone always rings but no one picks up. Is there any other number I can call?

Under STM32 MCUs software development tools, there are only ST's own tools:There needs to be one for "Other Tools" - for all the questions about Keil, IAR, and others ...eg, just now:https://community.st.com/t5/stm32-mcus-products/error-in-simulink-no-stm32-mcu-connected/td-p/734507earlier today:https://community.st.com/t5/stm32-mcus-embedded-software/error-when-compiling-with-makefile/m-p/734283 last week:https://community.st.com/t5/stm32-mcus-touchgfx-and-gui/stm32f746-iar-qspi-verification-error/m-p/732202  

I haven't seen a  'Mark all as read' option - am I just not looking in the right place?ie, how to un-bold all of these - without having to open each one individually: 

Example today:https://community.st.com/t5/stm32-mcus-touchgfx-and-gui/how-to-do-a-amp-quot-page-down-up-amp-quot-with-a-list/td-p/748977 I see similar about once a week ? PS:Interestingly, a search for "&quot" seems to interpret that as quotation marks:  

Cannot move this post to STM32 product forum.https://community.st.com/t5/stm8-mcus/sbsfu-stm32h7-script/td-p/757483Tried to check several options - nothing helps. "An Unexpected Error has occurred.".Otherwise the forum seems to work (can post normal replies to existing posts).  

When I click on the quote tool here in the forum, the entire OP is quoted. Most of the time, I want to quote a section of it or a section of a response in that thread instead of the OP. Thanks,

..

First, it is nice that the forum does now have some quoting ability at all; that's an improvement - thanks!But it is rather klunky:1. It only ever quotes an entire post in full - this is usually not helpful/useful.A decent quoting feature would allow a part of a post to be selected and quoted.2. Once you're inside the quote block, it seems impossible to get out of it. The 'Clear formatting' button doesn't work.

I think these pinned topics are no longer "news", and should be un-pinned? @Amel NASRI  

Dear ST Team,Please add the date of release somewhere ease to seehttps://www.st.com/resource/en/release_note/rn0114-stm32cubeide-release-v1170-stmicroelectronics.pdf     Yes, can be traced indirectly by document revision, but that is suboptimal in my view.What do you think ?Thank you 

This now seems to be the place for posts that don't fit anywhere else.Therefore the available labels need to be a lot more generic.Example:None of those labels fits that post.suggestions:Other HardwareOther SoftwareInterfacing3rd Party PS:Maybe 'Other Software' should be subdivided; eg,Other Software (embedded)Other Software (host)Other Software Tools

Moved to Feedback forum for better visibility & discussionThis post is response to this posthttps://community.st.com/t5/community-guidelines/how-to-write-your-question-to-maximize-your-chances-to-find-a/ta-p/575228 Ideas:1. Auto insert link to this 'how to' guide to the body of new post.2. auto insert into title some variation to "Briefly describe your problem (~10 words max)"3. Auto insert fields/form template to fill in by user eg MCU, platform, tool version etc.

Anybody has a contact with STM s site in Catane ( Sicilia)?Thank you in avance !

Good morning,I placed an order a few weeks back, and it is showing that is being on hold for some reason.No problem, I will contact customer service. Except:- the "contact us" link on the order acknowledgment email sends me to an "invalid page" (see attached ST_1.png)- going on the ST website and clicking on "contacts" shows me a page where I can choose my country (UK). Once done, is shows me an email address Contact.uk@st.com. (see attached ST_2.png)Attempting to send an email to that address fails because the address does not exist at ST.com. (see attached ST_3.png)- the website is also very slow, occasionally timing out for now reason. This has been mentioned before, in messages as old as six months ago, and yet there seems to be no improvement.This makes the whole experience of dealing with the ST website frustrating, which is a shame because your products are very useful.For now, can I please have a contact email to send a request about my order status?

I was going to buy a few STM32 boards from the eStore with the free shipping a few days ago, but it was showing it was no longer free shipping, so I just abandoned the cart.  Today I got an email advertising free shipping until Nov 30 trying to get me to buy the stuff I left in the cart.  As should be obvious, December 2nd is after that date, and thus clicking the link to buy the stuff with free shipping just gets me back to where I was.  You really shouldn't send out emails offering expired offers (or should make the link work with free shipping if that is your goal).  

At the following link under related links the ST-MCU-FINDER-PC trys to open a app on opensusehttps://community.st.com/t5/stm32-mcus/how-to-use-vs-code-with-stm32-microcontrollers/ta-p/742589All others work fine.

These are not new posts, and they are not by @Lina_DABASINSKAITE !They have just been moved - presumably as part of this reorganisation:https://community.st.com/t5/stm32-mcus-other-solutions/forum-board-changes/td-p/722560And the posts are not in 'STM32 MCUs Other solutions' - they have been moved from 'STM32 MCUs Other solutions'!  So every detail of those notifications is wrong!

Hello,I would like to know how to send a ZIP file in a private message. I don't have this option at the bottom of the pageBut I have only theses option at the Top of the page :And with this options, I can't send anything.Thank you

Hello Everyone, My name is Konstantinos and it is my very first post in this community so please forgive possible mistakes. Im posting here since i failed to find any "introduction" topics.I work as PCB repair electronics technician and when it comes to programming i have only moderate knowledge of C language and little experience on programming MCU's. I started with arduinos and hope to get to learn stm32 mcu's. As you probably figured i have 0 experience with stm32 and i would like some guidance on where and how to start. Any advice appreciated.Thank you all !

I repeatedly encounter the issue of not finding suitable 3D models for ICs from ST. There are some library providers that offer not only symbols and footprints but also low-quality 3D models. However, I tend to create the libraries myself, both for work and personal use. This is because the libraries from various providers seem either poorly made or poorly automated. But that’s beside the point—I would greatly appreciate it if all 3D models for ST products were available for download on the product page alongside datasheets and application notes.Although I have managed to extract 3D models from larger 3D assemblies, such as NUCLEO boards, this is incredibly time-consuming. Thank you very much.

Hello, this is not for MCU but a remark for the forum software: the overview page only shows the start date of a thread. At least for me it would be helpfull to also see the date of the most recent post. That way, it is easier to see if  new post where done to a thread after my last visit. Thanks   PS: Why is there no "Location" like "Forum" to discuss problems and enhancements to the forum?

It seems that the forum has had a makeover while I've been away on Other Things?It seems that links to (some?) old posts (from before the update?) are now broken; eg, in this post:https://community.st.com/t5/stm32-mcus-wireless/current-consumption-in-stop-mode-using-b-l072z-lrwan1/m-p/448139/highlight/true#M14437As you can see from my edit there, the referenced content does still exist - it's just the link that's broken.Also links in old notification emails are now broken.I keep these as a quick way to find important posts/threads - so it's a pain that they're now useless.