STM32CubeIDE (MCUs)

Hi, so the recent change to make CubeMX a separate app has broken my old project. I am using a Nucleo board and HAL in the project. After a change to the .IOC file I get "stm32h7xx_nucleo_conf.h:50: warning: "USE_NUCLEO_144" redefined". Is there a resource somewhere explaining to to do all of the after the CubeMX split? 

Modern microcontrollers have a lot of perifhery. Several buses of different types.STM32 hardware has outgrown C. Too much complex perifhery to manage with procedural language.ST software is much behind of ST hardware. Look at any I2C or SPI open source C library. Any can be used with one device of some type only.In case of I2C there are lines like this in header:#define SSD1306_I2C_PORT hi2c1 #define SSD1306_I2C_ADDR (0x3C << 1)andextern I2C_HandleTypeDef SSD1306_I2C_PORT;in C file.If somebody need one device on differnt port or on different device address he have to edit source files of library.If somebody need more devices of the same type on different device addresses and/or on different ports, he have to throw away library and write own solution.It is not possible to get library and make something like this:i2c_device1 = create_i2c_device(port1, dev_adr1, params1...); i2c_device2 = create_i2c_device(port1, dev_adr2, params2...); i2c_device3 = create_i2c_device(port2,

Hi everyone,I’m working on an STM32CubeIDE project generated with CubeMX and I’m trying to integrate mbedTLS to run a TLS stack.Setup details:MCU: STM32U375Secure Element: STSAFE-A120IDE: STM32CubeIDE (v2.0.0)CubeMX (v6.16.1) used for project generationTarget IoT platform - AWS IoT CoreAfter generating the project with CubeMX, I see the following components:Middlewares/ST/STM32_CryptographicMiddlewares/ST/STSElibX-CUBE-STSE01/Target folder at the project rootHowever, I can’t find any option in CubeMX → Middleware to enable or add mbedTLS. From what I can tell, CubeMX doesn’t expose mbedTLS as a selectable middleware for this MCU / configuration.I’ve seen suggestions (including from Google AI) that mbedTLS needs to be added manually, for example by:Adding the mbedTLS source to Middlewares/Third_Party/mbedtlsUpdating include paths and compiler symbolsConfiguring mbedtls_config.hPotentially hooking mbedTLS crypto callbacks to the STM32 cryptographic drivers or STSAFE servicesMy questions:

Heyho,I had some really strange error, which went away when turning optimization from "fast" to "off".The function EthPhyInit() always returned 166 = 0xA6 - it should return "HAL_StatusTypeDef", something between 0 .. 3.So I changed all the return values to some integer between 1..8 to find out where things go wrong, then added the last line:uart_printf("EthPhyInit() good ->return 0\n\r");before returning 0 when all went well.Still, always got 166 back, even when I got "EthPhyInit() good ->return 0\n\r" on the terminal.Until I turned optimization OFF, now all is good.WTF is happening there? Can optimization be that bad? /* +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ */ /** * @brief all PHY, ETH MAC & DMA reset and init: * 1) EthBaseInit() GPIO, clocks, basic stuff * 2) EthPhyInit() PHY * 3) EthMacInit() MAC registers * 4) EthDmaInit() DMA registers * @PAram - * @retval HAL status */ uint8_t EthAllInit(ui

Hello ST Community,I am facing a complete breakdown of my development environment with my STM32F407G-DISC1 board. I am dealing with three critical issues: a persistent debugging failure, the sudden disappearance of CubeMX from my PC, and an inability to download any installers from st.com to fix it.Here is the detailed situation:1. The Debugging/Flashing Issue I am powering the board via USB only and have been careful not to cause any power conflicts. However, I suddenly cannot flash or debug any code.* Error: "Error finishing flash operation" (using ST-LINK GDB Server).* Behavior: The ST-Link is detected, but the write operation fails immediately.* Steps Taken:* I tried changing the Reset Behaviour to "Connect Under Reset".* I tried holding the hardware Reset (Black) button manually while connecting.* I updated the ST-Link Firmware on the board (Update was successful).* I attempted a "Full Chip Erase" with STM32CubeProgrammer, but it also fails to communicate properly with the ta

Hello, Using controller: STM32F767BIT6 External SRAM: SRAM-1x16M-48TSOPI Interface SRAM via FMC is successful, currently using heap_4 and tried to work with moving variables & complete heap to external SRAM and it works. But I want to use external RAM as extended RAM if internal RAM get exhaust. I have seen some examples in Keil which allow to do the same by using .ANY .ANY (+RW +ZI)  So, this will allow to use runtime RAM if it is free, so just for thoughts, if I define .ANY in internal and external RAM then in runtime it will decide where to go based the available size. But in STM32CubeIde, not sure how it can be done. So, I need help or examples to understand how we can actually use external SRAM as extended RAM. Thanks, Nitin

stm32cubeclt一直安装不了，明明安装路径没有中文，就是安装失败。   Edit by ST Moderator (Here is the translation of your post): The STM32CubeCTL simply won't install. Despite the installation path containing no Chinese characters, it still fails.

New user, fresh download of STM32CubeIDE 2.0.0.Created the demo "hello world" c++ project. Then attempted to compile it. It fails with the message:Error: Program "make" not found in PATHPATH=[C:/ST/STM32CubeIDE_2.0.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.jre.win64_3.4.100.202508201254/jre/bin/server;C:/ST/STM32CubeIDE_2.0.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.jre.win64_3.4.100.202508201254/jre/bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\windows\System32\OpenSSH\;C:\ST\STM32CubeIDE_2.0.0\STM32CubeIDE] I have examined the contents of C:\ST\STM32CubeIDE_2.0.0\STM32CubeIDE and i dont see "make.exe" anywhere in the directory tree. Where is it? Why doesnt the IDE find it wherever it is? Help

I have a project that builds with no errors but when I "Run as..." the project builds but  never enters the upload sequence so doesn't upload.The board in question is a Nucleo F411RE & is communicating fine over UART. A previously loaded project is still sending out its debug messages, so I know the USB is good.Debug is not playing either... 

I am facing an issue with STM32CubeIDE installation where the “STM32 Project” option and CubeMX functionality are missing even after downloading the latest STM32CubeIDE package from the official ST website, extracting the ZIP file, and running the installer as administrator. The IDE opens successfully, but essential features such as MCU/Board selection, CubeMX integration, and embedded software package management are not available, which prevents me from creating a standard STM32 project. I have already tried reinstalling the IDE, but the problem persists. I would appreciate guidance from the community on the correct installation procedure or any additional steps required to enable full STM32CubeIDE and CubeMX support on Windows. 

Hello all,I have created a project with STM32CubeMx based on this evaluation board:I generate the source code, and I  can compile it correctly from STM32CubeIDE.The problem is when I try to Run or Debug it, I get this message:If anyone can help me I would appreciate it.Much thanks in advance.  

I want to use DMA with SPI in slave receive mode with words longer than 8 bits :I launch the DMA with the function: HAL_SPI_Receive_DMA( &HSPI_ADS, (uint8_t*)ads_dma_buffer, ADS_BUFFER_MAX_SIZE );Unfortunately in this function the following test fails:  /* Packing mode management is enabled by the DMA settings */ if (((hspi->Init.DataSize > SPI_DATASIZE_16BIT) && (hspi->hdmarx->Init.DestDataWidth != DMA_DEST_DATAWIDTH_WORD) && \ (IS_SPI_FULL_INSTANCE(hspi->Instance))) || \ ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) && (hspi->hdmarx->Init.DestDataWidth == DMA_DEST_DATAWIDTH_BYTE))) { /* Restriction the DMA data received is not allowed in this mode */ errorcode = HAL_ERROR; __HAL_UNLOCK(hspi); return errorcode; } Because the structure "hspi->hdmarx->Init" is never initialized. It is not initialized, but the structure associated with the nodes is indeed initialized.In the case where the data size is 8 bits, the test i

Hi, I’m working on an STM32H7S78‑DK project that uses FreeRTOS, with STM32CubeIDE v2.0.0 on Windows. The ST‑LINK debugger works normally as long as RTOS Proxy is disabled, but cannot be launched once I enable RTOS Proxy. Error message and Console prints as below: My debugger configuration: The exact same project used to run fine with RTOS Proxy enabled, but it suddenly started failing one day without any changes to my debug settings. The board itself should be good, as it works normally on another development setup.Has anyone seen this issue before, or is there any known limitation with RTOS Proxy on the H7S series? Any pointers would be appreciated.

Hi,Today I have downloaded STM32IDE. I am trying to develop some projects with my NUCLEO F401RE. I have tried that create a new file from this way but program does not create any .ioc file. Can you help me?Thank you.

MT tools is mess of Eclipse-RCP based tools (CubeIDE) and tools with hand-made GUI, whichresembles GUI of 90x (CubeMX, CubeProgrammer).Hand-made GUI applications has a lot of code which can be thrown out after switch to Eclipse RCP.Anyway, CubeMX is Java GUI application. CubeMX and CubeProgrammer has primitive Java GUIdeveloped from scratch.Instead of use a lot of existing functionality of Eclipse RCP, developers had to write own codeand invent a lot of wheels. It increase costs of development and maintanence.It is not much effort to move CubeMX functionality to Eclipse RCP application.A lot of code can be thrown away. It will decrease costs.With Eclipse 4 one can make GUI XML model with visual tool and make several simple adaptersto inject existing Java panels in corresponding model views.With such approach MX-relative perspectives can be used as standalone application and used withany IDE. And can be integrated in CubeIDE.It is very flexible solution. Current CubeMX is old monolithic

Hi,I would like to report that STM32CubeIDE is freezing when running on Wayland session.The solution I found is to start Ubuntu in a X session.Best regards,Daniel

I am trying to use the gprof editor/viewer within cubeide but it doesn't work, everything just freezes then crashes with no error messages, i also found nothing in the logsI'm trying to use gprof profiling arm-none-eabi-gprof.exe, i have my code instrumented and got a valid gmon.out file, it is small ~15kb, the file is valid as i can process is manually with gprof.exe and get a textual representation of the profiling data.However i don't want text output, i want the included viewer in the cubeide, to see in a nice tree view the data, i have the option to open the gmon.out file with the gprof editor but when i do, it asks for the corresponding elf file then after that everything freezes then crash. What am i doing wrong? Is this expected to work at all? Did anyone use it?Cube ide1.18 stm32f429 discovery project

I'm trying to configure DMA in Memory-to-Peripheral mode for the STM32WB09KE, specifically to transfer data from memory to a Timer channel (TIM2_CH3 for Addressable LED's). However, in STM32CubeMX, I cannot see the expected DMA options under the DMA Settings tab for my Timer.    

With CubeIDE 1.x iterative development is simple1 Start CubeIDE and create new project. It is possible to select C++ project option at project start (without any effect)2 With Device Configuration Tool create initial perifery config. It is possible to open second windows for it and have two separate windows side by side. Generate code.3 Switch to first window and work with generated code4 If need new device, switcn to second window, add new device, config it and generate code.5 In first window regenerated code is created in sync with Configuration Tool. Convenient and logical steps. Great work!How iterative development can be done with CubeIDE 2.0? 

I am trying to build the readily given Nx_webserver project , i had selected the given example and just change the tool chain to STMcube IDE inorder to build the project with the cube ide after redirection to the cube IDE i just click on the build , it ends up with the following error: Spoiler (Highlight to read)12:03:20 **** Build of configuration Debug for project Nx_WebServer_FSBL ****make -j8 all arm-none-eabi-gcc "C:/Users/admin/STM32Cube/Example/Nx_WebServer/Middlewares/ST/threadx/common/src/tx_block_pool_performance_info_get.c" -mcpu=cortex-m55 -std=gnu11 -g3 -DRTL8211_INIT_TO=10000 -DETH_PHY_1000MBITS_SUPPORTED -DDEBUG -DUSE_HAL_DRIVER -DSTM32N657xx -DFX_INCLUDE_USER_DEFINE_FILE -DNX_INCLUDE_USER_DEFINE_FILE -DTX_INCLUDE_USER_DEFINE_FILE -DTX_SINGLE_MODE_SECURE=1 -c -I../../../Middlewares/ST/netxduo/ports/cortex_m55/gnu/inc -I../../../Middlewares/ST/threadx/ports/cortex_m55/gnu/inc -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -mcmse -

Can multiple versions of a software be installed on one computer or system? The latest version I recently downloaded doesn't include MX. Should I install version 1.19.0, or use the uninstallation method for version 2.0.0?

Hello all,I have been reading other posts with the same problem but I do not get the solution in my case.I'm using the development kit STM32F446RE (Nucleo 64).I have created a new project with STM32CubeMX 6.16.1, and I open the project with STM32CubeIDE 2.0.0. When compiling (in Debug or Release) I get this error: 11:39:26 **** Incremental Build of configuration Debug for project TEST_ST_NUCLEO ****make -j22 all make: stat: ../Core/Startup/startup_stm32f446retx.s: Permission deniedmake: *** No rule to make target '../Core/Startup/startup_stm32f446retx.s', needed by 'Core/Startup/startup_stm32f446retx.o'. Stop."make -j22 all" terminated with exit code 2. Build might be incomplete.11:39:27 Build Failed. 1 errors, 0 warnings. (took 584ms) Any help will be welcome. Thanks in advence.  

From cube 1.3.0 I always get this error and the cause seems to be the path generation in .d files. In cube 1.12.1 the path is relative but from cube 1.3.0 it is absolute and generates something like \\?\C:\.... So the only solution for me is to stay with cube 1.12.0. The build however seems ok an the bin file is generated. Did anyone had a similar issue? The issue is present only on windows and it seems ok on linux.arm-none-eabi-size STM32F769I_TEST.elfarm-none-eabi-objdump -h -S STM32F769I_TEST.elf > "STM32F769I_TEST.list"arm-none-eabi-objcopy -O ihex STM32F769I_TEST.elf "STM32F769I_TEST.hex"arm-none-eabi-objcopy -O binary STM32F769I_TEST.elf "STM32F769I_TEST.bin"text data bss dec hex filename1227608 43680 452264 1723552 1a4ca0 STM32F769I_TEST.elfFinished building: default.size.stdoutFinished building: STM32F769I_TEST.hexFinished building: STM32F769I_TEST.binFinished building: STM32F769I_TEST.listtest/web/unicabminnow.d:1: *** multiple target patterns. Stop.make: *** [makefile

I just installed CubeIDE 2.0.0 on Ubuntu 24.04 (finally!).  However I cannot launch it (I do get the initial workspace selection popup, but after selecting "Launch" I get this error):$ /opt/st/stm32cubeide_2.0.0/stm32cubeide_wayland Could not create GBM EGL display: EGL_NOT_INITIALIZED. Aborting...A little bit of poking around on Google suggests that installing libnvidia-egl-wayland1 should fix this issue, however on my system libnvidia-egl-wayland1 is already installed:$ dpkg -l | grep libnvidia-egl-wayland1ii libnvidia-egl-wayland1:amd64 1:1.1.13-1ubuntu0.1 amd64 Wayland EGL External Platform library -- shared libraryii libnvidia-egl-wayland1:i386 1:1.1.13-1ubuntu0.1 i386 Wayland EGL External Platform library -- shared library I have tried rebooting a couple of times but I keep getting the same error.  Does anyone know how to fix this?

SOMETIMES (not always), when i try to debug (and only when i try to debug, run does its job well) with STM32CubeIDE my Riverdi board, i encounter the "Could not verify ST device! Please verify that the last version of the GDB-server is used for the connection" error. It happens right afterLoading RTOS driver... ThreadXConnecting to GDB server 127.0.0.1 on port 61234 ... ConnectedListen for GDB connection on port: 60000 ... Connected.if this helps.Downloading code with run is always fine, and sometimes the debug option works, but not always. It is really annoying to rely on luck to make the *** thing work. I tried unplug-replug. The board is definitly not counterfeited, same goes for the ST-Link.