STM32CubeProgrammer (MCUs)

Hello, i found next problem. If open app, and try connect to board with unsuccessful result, than app can't be closed any method, other than via task manager. In other case, app close via stantard button. This bug not disapering, if, for example, first try was failed, but few try later was successful. OS Windows 10 x64 (with last update at time of writing this topic). Tested chips: STM32L053 (custom board), STM32F031(NUCLEO-F031K6) .

Hi everyone,I migrated to L4Q5 MCU and the Embitz debugger is not able to see the Target. I have pointed the build options to the new linker file. However, I feel like I need to translate STM32CubeProgrammer settings to the Embitz debugger options. What do I need to do to make it work?

Hello,I am trying to program the STM32H743ZI using the STM32CubeProgrammer tool in uart mode.First in order to get the board into the boot loader I use the following runtime code to get into bootloader mode:/** * Function to perform jump to system memory boot from user application * * Call function when you want to jump to system memory */ void JumpToBootloader(void) {     uint32_t i=0; void (*SysMemBootJump)(void);   /* Set the address of the entry point to bootloader */ volatile uint32_t BootAddr = 0x1FF09800;   /* Disable all interrupts */ __disable_irq();   /* Disable Systick timer */ SysTick->CTRL = 0;   /* Set the clock to the default state */ HAL_RCC_DeInit();   /* Clear Interrupt Enable Register & Interrupt Pending Register */ for (i=0;i<5;i++) { NVIC->ICER[i]=0xFFFFFFFF; NVIC->ICPR[i]=0xFFFFFFFF; }   /* Re-enable all interrupts */ __enable_irq();   /* Set up the jump to boo

:-1: error: /home/serg/STMicroelectronics/STM32Cube/STM32CubeProgrammer/api/project/Qt/STM32CubePrgAPI/../../../../lib//./libQt5Xml.so.5: undefined reference to `QXmlUtils::isPublicID(QString const&)@Qt_5_PRIVATE_API'Qt Creator 4.7.1Based on Qt 5.11.2 (GCC 5.3.1 20160406 (Red Hat 5.3.1-6), 64 bit)Built on Sep 18 2018 14:49:52

Do both tools not support the STM32L471VE ?

I installed STM32CubeProgrammer and connected my STLINK/V2 (B 2016 25) to my target board which uses an STM32L151CBU6 and tried to flash my code. I get the following result:09:45:21:779 : Size : 9152 Bytes09:45:21:779 : Address : 0x08000000 09:45:21:780 : Erasing Segment <0> Address <0x08000000> Size <9152>Bytes09:45:21:780 : Erasing memory corresponding to segment 0:09:45:21:850 : Memory erase...09:45:21:850 : Error: Flash loader cannot be loaded09:45:21:888 : Error: failed to erase memory11:20:24:677 : Warning: Connection to device 0x429 is lost11:20:25:154 : Disconnected from device.11:20:25:156 : STLinkUSBDriver.dll loadedI can flash the board with the STM32 ST-LINK Utility without problems.What could be wrong?

When using the STM32CubeProgrammer 2.4.0 API to write the address 0x08080000 the API hangs (my program hangs). I tried the STM32CubeProgrammer software itself, if I choose the EEprom view (in the grid) and I modify any byte, when I validate modification using Enter key, the STM32CubeProgrammer software hangs also.

We can not user gdb for debug with our board. We can not user stm32programmer eitherIt works correctly with stlink and debug with openocd.the strange thing is that stm32cube programmer connects correctly to the device but recognizes it as stm32l0.what can we do?regards

Hello,My Linux specs:Linux lime2 3.4.104-00136-gd47d367armv7l GNU/LinuxSetupSTM32CubeProgrammer.linux file's information:ELF 32-bit LSB executableIntel 80386version 1 (GNU/Linux)for GNU/Linux 2.6.24not strippedWhen I try to install, error shows up saying that installation couldn't create folder /bin/ and temporary file "libstp11_SAM.so.conf".When I manually add mentioned file and folder, installation finishes but I cannot run "STM32CubeProgrammer.desktop" file which is created on my desktop.So, my question is whether I can install CubeProgrammer on my machine based on given specifications?Thanks in advance,A.C.

I am working on the stm32l562 DK Board, when I program Software into STM32L5 microcontroller internal Flash memory and Configure STM32L5 static security protections, I find that stm32l562 DK Board can not conect to the stlinker with stm32cube programmer.at the same time the keil says cpu locked up ,stop target.if I want to connect to the stlinker,what I can do?stm32l562 DK Board stm32cube programmer and keilthanks

I have installed the latest (en.stm32cubeprog_v2-3-0) version in Windows 10 64 bit PC.After installation, the first startup icon with spinner only comes up , closes and does not run.As far as googled and found online, it is java versioning issue. This is not new. Last version also, I had to manually kill the Java process from Task Manager, and then re-opening used to run.Now, I don't see a Java process itself.Given there are variety of Java versions, environments, when will you fix your CubeProgrammer dependency path settings, so that it looks at correct place !? Java versions in my PC are:C:\Program Files\Java>dir Directory of C:\Program Files\Java 27/01/2020 10:29 <DIR> . 27/01/2020 10:29 <DIR> .. 05/07/2018 14:17 <DIR> jdk-10.0.1 22/10/2018 08:19 <DIR> jdk-11.0.1 27/08/2019 09:02 <DIR> jdk-11.0.4 27/08/2019 08:59 <DIR> jdk-12.0.2 14/11/2018 09:43 <DIR> jdk1.8.0_192 27/08/2019 09:00 <DIR> jdk1.8.0_221 27/01/2020 10:29 <DIR&gt

I'm trying to program STM32L031 microcontroller using STLINK but STM32CubeProgrammer gives me the following error:Error: No STM32 target found!These are the conditions:1) The hardware is correctly connected because the STM32CubeIde emulates correctly the target2) I have updated the STLINK firmware to the last firmware release3) I have tested the programmer on another computer and I get the same error4) I already tested to power cycle several times the target and the emulator but nothing changesCan someone help me?Thanks in advancePaolo

Sorry, posted the wrong device before. Corrected that.

I want to know what is use of user data in option bytes programming?it helps to protect my firmware inside MCU like password or etc?

Hello,I put my STM32H743XI in Bootloader mode and launch STM32Cube Programmer USB example on VS and got : I have two question :Where does this error comes from and how to fix it ?Can I skip option bytes programming and still flash my MCU ?Regards

Trying to uninstall the previous version, I get: "Windows cannot find C\Program Files (x86)\Java\jre1.8.0_251\bin\javaw.exe. Trying to run the newly installed Programmer, I get "CubeProgrammer_API or one its dependencies is missing. Please try reinstalling or check your java architecture. The trouble is that I installed JRE 1.8.0_45 because that's what the CubeMX said it needed. How do I get out of this loop?

I try to connect to target STM32H747I-DISCO but show this message:08:58:19 : ST-LINK SN : 004800413137510D3938353808:58:19 : ST-LINK FW : V3J3M208:58:19 : Voltage : 3.27V08:58:19 : No STM32 target found!08:58:20 : ST-LINK SN : 004800413137510D3938353808:58:20 : ST-LINK FW : V3J3M208:58:20 : Voltage : 3.27V08:58:20 : Error: No STM32 target found!And the file in FAIL.TXT with:The interface firmware FAILED to reset/halt the target MCUhow can I solve that?

In the Erasing & Programming tab the file path browse button dialog will not allow me to select an s-record file, even if the file type is s19, srec, or Srec.Thanks.

I am student developing an app that uses the STM32CubeProgrammer command line interface executable to program STM32F405.The controller works as excepted if it is programmed at the address 0x08000000.but sometimes the programming processes fails or stops halfway.

Deadlock on STM32H745I-Disco board .The STM32H745I-Disco board Throws error "No STM32 target Found" in STM32CubeProgrammer . Can we recover this Board if the TAG connector is connected to SEGGER DEBUG Adapter 11:10:20 : STM32CubeProgrammer API v2.5.011:10:36 : Read File: C:\Users\180200_sgpcu\Documents\LOCAL\STM32H745I\STM32H745I\CM7\Debug\STM32H745I_CM7.bin11:10:36 : Number of segments: 111:10:36 : segment[0]: address= 0x0, size= 0x313C11:10:41 : ST-LINK SN : 0027003E3137510F3938353811:10:41 : ST-LINK FW : V3J7M211:10:41 : Board : STM32H745I-DISCO11:10:41 : Voltage : 3.27V11:10:41 : No STM32 target found!11:10:41 : ST-LINK SN : 0027003E3137510F3938353811:10:41 : ST-LINK FW : V3J7M211:10:41 : Board : STM32H745I-DISCO11:10:41 : Voltage : 3.27V11:10:41 : Error: No STM32 target found!11:14:10 : Error: No debug probe detected.11:14:33 : ST-LINK SN : 0027003E3137510F3938353811:14:33 : ST-LINK FW : V3J7M211:14:33 : Board : STM32H745I-DISCO11:14:33 : Voltage : 3.26V11:14:33 : No STM32 ta

Hi,when I'm trying to read the content of the internal flash memory via internal UART DFU bootloader STM32CubeProgrammer 2.4.0 CLI reports the following fatal error: > .\bin\STM32_Programmer_CLI.exe -c port=COM3 br=57600 P=EVEN db=8 sb=1 -u 0x8000000 0x400 test.hex ------------------------------------------------------------------- STM32CubeProgrammer v2.4.0 ------------------------------------------------------------------- Serial Port COM3 is successfully opened. Port configuration: parity = even, baudrate = 57600, data-bit = 8, stop-bit = 1.0, flow-control = off Activating device: OK Chip ID: 0x410 BootLoader protocol version: 2.2 Device name : STM32F101/F102/F103 Medium-density Flash size : 128 KBytes (default) Device type : MCU Device CPU : Cortex-M3 UPLOADING ... File : test.hex Size : 1024 Bytes Address: : 0x8000000 Read progress: Error: Upload size is bigger than flash memory size.This happens for all sizes, except 0 Bytes.Using the STM32CubeProgrammer

Hello!I have generated with STM32CubeIDE the BIN file and the HEX file from the same application.Then I used STM32CubeProgrammer to program the MCU, first using the BIN file, and then the HEX file. After each time the MCU is programmed, I have read the flash memory.I was expecting these two memory dumps to be exactly the same. However, there are 8 bytes that in one of them are zeros (00), and in the other one are ones (FF). It is only 8 bytes out of 131071, but I would like to know why this happens.Thanks!

Firing up STM32TrustedPackageCreator that comes with STM32CubeProg 2.5.0 on MacOS, immediately blows up with:Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Exception Note: EXC_CORPSE_NOTIFY   Termination Reason: DYLD, [0x3] Wrong version   Application Specific Information: dyld: launch, loading dependent libraries   Dyld Error Message: Library not loaded: @rpath/QtWidgets.framework/Versions/5/QtWidgets Referenced from: /Applications/STMicroelectronics/*/STM32TrustedPackageCreator.app/Contents/MacOS/bin/STM32TrustedPackageCreator Reason: Incompatible library version: STM32TrustedPackageCreator requires version 5.11.0 or later, but QtWidgets provides version 5.10.0Happy Friday

Hi, cube programmer does not reset the board after loading finished and board remains in boot loader mode. Older Dfuse demo utility used to reset board after loading finished. Does any one has some idea to reset the board grammatically and bring out of reset . As my board may not have physically reset option after firmware update. Thanks,

The datasheet of stm32f411 says it supports USB DFU bootloader, but Im unable to programe Stm32f411-disco board via USB with internal DFU on Cube programmer, I have connected the boot0 to vdd and using the USB connected to PA11\PA12 for DFU.Is there any specific hardware change that I have have this working?Thank you.